1 / 16

Prison Solutions: RF Jamming

Prison Solutions: RF Jamming. Active & Reactive RF Jamming to combat Contraband Cellular Phones in Prisons and Government Facilities. Active & Reactive RF Jamming to combat Contraband Cellular Phones in Prisons and Government Facilities.

maik
Download Presentation

Prison Solutions: RF Jamming

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Prison Solutions: RF Jamming Active & Reactive RF Jamming to combat Contraband Cellular Phones in Prisons and Government Facilities

  2. Active & Reactive RF Jamming to combat Contraband Cellular Phones in Prisons and Government Facilities

  3. Problem: Correctional Facilities experience a high rate of contraband cellular phones being smuggled in. Problem: Convicts continue to carry out criminal activities in Prison, by communicating to criminals outside of Prison using illegal Cell Phones.

  4. Captured phones from a Prison

  5. Solution 1: Active RF Jamming using Directional RF initiation to maximize coverage inside the facility, covering RF Shadow zones, while minimizing neighboring areas inside and outside of the Prison.

  6. Professional Quality Control Efficient Production Run MS2-3 Cellular Jammer: PLL Stabilized Design

  7. Detector Jammer Early Prototype Design # 0125A Above: 2nd Generation MS6-180 series prior to conversion for the hybrid Detector Jammer Jammer Variations & Configurations Below: Covert Jammer installation into Exit Sign Housing Detector Jammer Early Prototype Design # 0125C

  8. Solution 2: Reactive Detection and RF Jamming The Detector Jammer listens to the RF Environment. Upon confirmation that a mobile phone is actively sending or receiving a call, the sensor triggers the RF Jamming System. The sensor powers off as the Jammer activates, severing the link between the local service provider and the mobile phone.

  9. Detector Jammer Configurations Detector Jammer # 0131C

  10. Detector Jammer Deployments

  11. Detector Jammer Deployments

  12. Attributes of the Detector Jammer • THE DETECTOR JAMMER CAN BE CONNECTED TO A SINGLE CONTROL CENTER • THE CONTROL CENTER SOFTWARE CAN BE STORED ON A DESKTOP OR LAPTOP • INDICATORS DISPLAY SYSTEM STATUS, INCLUDING ALARMS

  13. THE GUI WILL SHOW WHICH DETECTOR JAMMERS WERE SET OFF • THE USER MAY PROGRAM HOW ACTIVE JAMMING MAY TAKE PLACE BEFORE REVERTING TO THE DETECTION MODE (FACTORY PRESET IS FOR 5 SECONDS)

  14. WITH AN RS-485 INTERFACE (dual wire differential simplex serial connection) THE SYSTEM MAY USE 1 MASTER AND MULTIPLE SLAVES: ALL DETECTOR JAMMERS MAY BE INTER-CONNECTED USING THE SAME CABLE, AND THEN CONNECTED TO THE CONSOLE AT THE CONTROL CENTER

  15. ANTENNA DESIGN IS DIRECTIONAL IN BOTH VERTICAL AND HORIZONTAL PLANES. THE SIGNAL IS STRONGEST DIRECTLY IN FRONT OF THE ANTENNA, WHICH IS OF A FIBERGLASS FACE PLATE CONSTRUCTION • THE RECEIVER IS NOT ABLE TO OPERATE WHILE THE JAMMING FEATURE IS ACTIVELY ENGAGED IN RESPONDING TO ACTIVE MOBILE PHONE OPERATION, AS IT GOES DORMANT UNTIL THE PRE-SET TIME EXPIRES

  16. For more information, Contact Us HSS Development info@secintel.com

More Related