1 / 38

STONE AND REINFORCED MASONRY

Name:Kalpesh R Nena Branch:BE Mechanical Roll no.:02 Subject :ECE. STONE AND REINFORCED MASONRY. Chapter 9. Chapter 9 Stone & Concrete Masonry. 10.1 STONE AND REINFORCED MASONRY - OVERVIEW. 10.2 TYPES OF ROCKS USED IN STONE MASONRY 10.3 QUARRYING AND PRODUCING OF BUILDING STONES

marlaf
Download Presentation

STONE AND REINFORCED MASONRY

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Name:Kalpesh R Nena Branch:BE Mechanical Roll no.:02 Subject:ECE STONE AND REINFORCED MASONRY

  2. Chapter 9 Chapter 9 Stone & Concrete Masonry

  3. 10.1 STONE AND REINFORCED MASONRY - OVERVIEW • 10.2 TYPES OF ROCKS USED IN STONE MASONRY • 10.3 QUARRYING AND PRODUCING OF BUILDING STONES • 10.4 TYPES OF STONE MASONRY WALLS AND THEIR CONSTRUCTION • 10.5 PRECAST CONCRETE MASONRY AND CONSTRUCTION OF WALLS

  4. Stone vs Brick • Similarities: • Both stacked • Mortar Joints • Differences: • Shape: • Brick molded - Stone Cut and Carved • Physical Properties: • Brick made/controlled – Stone provided by nature

  5. 10.2 TYPES OF ROCKS USED IN STONE MASONRY • Stone Masonry: Building stones obtained by quarrying from the rocky strata of earth and reducing it to the required shapes and sizes for construction • Types of rock: (i) Igneous- Formed as a result of cooling of the molten rock to solid state - It is nonporous, hard, strong and durable - Granite: Consists mainly of quartz, feldspar, mica, and other colored minerals; colors include black, gray, red, pink, brown, buff, and green - Serpentine: Main ingredient is serpentine; color ranges from olive green to greenish black, is fine grained and dense - Basalt:Color ranges from gray to black; used mainly for paving stones and retaining walls -(ii) Sedimentary:Sediments deposited by the action of water or wind gets consolidated to a rock -Sandstone:Sedimentary rock composed of sand sized grains made of silica, iron oxide and clay - Colors include gray, brown, light brown, buff, russet, red, copper, and purple -Shale:Derived from clays and silts; weak along planes and is in thin laminations - High in limestone and color varies from black to red, yellow, and blue

  6. Granite • Non-porous, hard, strong, durable • Color Range • Surface Textures • Sources • Primary Uses

  7. Polished Surface Rough Texture

  8. Shape Flat to Round

  9. 10.2 TYPES OF ROCKS USED IN STONE MASONRY(Cont’d) • - Shale:Derived from clays and silts; weak along planes and is in thin laminations - High in limestone and color varies from black to red, yellow, and blue - Limestone:Sedimentary rock composed of calcite and dolomite - Three types: oolitic, dolomitic and crystalline - Has high compressive strength - Used for building stones and for paneling -Metamorphic:Igneous or sedimentary rock transformed by heat and pressure into another rock -Marble:Recrystallized limestone, color varies from white through gray and black, red, violet, pink, yellow, and green - Presence of oxides of iron, silica, graphite, carbonaceous, matter, and mica produce these color variations

  10. Limestone & Sandstone • Porous, relatively weak • Color Range • Surface Textures • Sources • Primary Uses

  11. Limestone with Granite

  12. 10.2 TYPES OF ROCKS USED IN STONE MASONRY(Cont’d) • - Quartzite: It is a variety of and stone composed of mainly granular quartz cemented by silica, color varies from brown, buff, tan, ivory, red through gray - Schist: Made of silica with smaller amounts of iron oxide and magnesium oxide - Color varies from blue, green, brown, gold, white, gray, and red - Slate: Consists mainly of clays and shales - Major ingredients are silicon dioxide, iron oxide, potassium oxide, magnesium oxide, and sometimes titanium, calcium and sulfur - Slate found in parallel layers, which enables it to be cut into thin sheets

  13. Metamorphic Rock Marble Slate

  14. Marble - Exterior Application

  15. Slate Flooring

  16. 10.3 QUARRYING AND PRODUCING BUILDING STONES • Produced by blasting or cutting- Irregular-sized stone is produced by blasting the rock, the larger pieces are cut into smaller units for use as an exterior finish, rest is crushed and sorted into various sizes as aggregates - Most of the dimensional stones used in building construction are produced by cutting large blocks in the quarry - Cut with diamond belt saws (12ft wide, 2 to 5 ft thick, and 50 ft long); rubber air bags inflated in the saw cut to break it away and then the separated rock is lowered onto prepared stone chips cushion - Thereafter it is cut into smaller sizes and transported by front-end loaders to the mill for further processing

  17. Types of Stone • Fieldstone • Rubble Stone • Dimension Stone

  18. Stone Masonry Patterns Laid in Mortar • Rubble (Unsquare pieces) • Ashlar (Square Pieces) • Coursed or Random • Orientation

  19. 10.4 TYPES OF STONE MASONRY WALLS AND THEIR CONSTRUCTION • 10.4.1 Types of Stone Masonry Walls:(i) Solid masonry wallmade by laying stone masonry over a prepared bed of mortar, and proceeding in a similar manner to increase the height;(ii) Composite wallmade of an outer wall of large stone slabs, attached to a backing of structural frame or brick/concrete masonry wall; and(iii) Cavity wallmade by two different types of masonry wall separated by a cavity, which is either insulated or empty and connected together by metal ties • 10.4.2 Laying of stone masonry blocks in a wall:(a) Rubble Masonry- Composed of unsquared pieces of stones; mason has to choose carefully each stone so that it can fit into the available space -(b) Ashlar masonry- Made of squared pieces of stones; mason has to carefully lift the heavy stones by a hoist and lower it into place -(c) Coursed stone masonry:has continuous horizontal joints -(d) Uncoursed or random masonry :Does not have defined bedding planes for the wall

  20. 10.5 PRECAST CONCRETE MASONRY AND CONSTRUCTION OF WALLS • 10.5.1 Precast Concrete Masonry Blocks:Manufactured by vibrating a stiff concrete mixture into metal molds, immediately turning it out wet onto a rack (so that the mold can be reused immediately) at a rate of 1000 or more units per hour - Racks are cured at an accelerated rate by subjecting them to steam, either at the atmospheric pressure or for faster curing at higher pressure. After the units are steam cured, the units are dried to a specific moisture content, and bundled in wooded crates for shipping to the construction site • Made in varying sizes and shapes: Standard hollow blocks - 4”x8”x16” long or 4”x8”x8” - 6”x8”x8” or 8”x8”x8”, 10”x8”x16”, or 10”x8”x8” , 12”x8”x16” or 12”x8”x8” -Other shapes:Channel bond beam, Low-web beam, Solid unit, Capping unit, A-block, H block, Header unit, Control joint unit, Single Bullnose, etc.

  21. Concrete Masonry Units • Manufacturing Process • Configurations • Testing Standards

  22. Bond Beam Typical Shape Combination ‘Corner’ – Round & Square

  23. Spanning Concrete Block Openings • Steel Lintels • Block Lintels - Reinforced Bond Beam • Precast Reinforced Concrete Lintel

  24. Reinforcing & Anchorage • Joint Reinforcing • Ladder • Truss

  25. 10.5 PRECAST CONCRETE MASONRY AND CONSTRUCTION OF WALLS (Cont’d) • -Masonry grades:N - Grade; For general use above or below grade;S grade:Above grade use only;Types : Type I - Moisture-controlled units for use where drying shrinkage of units would cause cracking in concrete masonry;Type II- Non-moisture-controlled units - weights: Normal, medium and light weights • 10.5.2 Laying of Concrete Blocks in Walls: • Mortarused in stone masonry is identical to the one used earlier in brick masonry construction • Only the face shells of the block are mortared with the webs unsupported • Often reinforced with steel to increase its load bearing capacity and its resistance to cracking • Concrete masonry is often reinforced with horizontal reinforcement steel, introduced as welded grids of small diameter steel rods, that are laid onto the bed joints, at the desired vertical intervals.

  26. System Properties • Sizes: 10 foot lengths; width should be 2” less than wall • Shapes: ladder & truss • Configurations: Many variations • Materials: Steel with various finishes and gauges Ladder Truss

  27. CMU Installation

  28. Layout & Lead Blocks

  29. Installation of Mortar Bead

  30. Lay CMU

  31. Tooled Joints

  32. Control Joint

  33. Splitface (colored) and Brick

  34. Painted CMU

  35. Splitface, Brick, & Tile

More Related