1 / 21

Sweep

Loft (sweep and blend combined . Sweep. Creates a solid with different cross sections, multiple paths could be used. Creates a solid with uniform cross section. Profile. Path. Sweep Command. Removes material as it sweeps. Creates a swept solid. Path. Profile (2D sketch). Sweep.

mead
Download Presentation

Sweep

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Loft (sweep and blend combined Sweep Creates a solid with different cross sections, multiple paths could be used Creates a solid with uniform cross section Profile Path Introduction to Engineering – E10

  2. Sweep Command Removes material as it sweeps Creates a swept solid Introduction to Engineering – E10

  3. Path Profile (2D sketch) Sweep Sweep command creates a solid by sweeping a profile along a specified path. A sweep feature requires two sketches; a profile and a path. The two sketches (profile and path) cannot lie on the same plane or be parallel. The path can be either open or closed profile. It could lie on one plane or lie on multiple planes (3D sketch) Introduction to Engineering – E10

  4. Path Profile Sweep Command in SolidWorks Sweep using a profile, path and Follow Path option Introduction to Engineering – E10

  5. Twisted Sweep Command in SolidWorks Sweeps using different Options Keep normal constant Follow Path Introduction to Engineering – E10

  6. Sweep Command in SolidWorks Sweep using a profile, path and one guide Profile Path Guide curve 1 Introduction to Engineering – E10

  7. Sweep Command in SolidWorks Sweep using a profile, path and two guides Introduction to Engineering – E10

  8. Sweep Command in SolidWorks Sweep using Merge Smooth Faces option Guide curve Path Introduction to Engineering – E10

  9. Sweep Command in SolidWorks Introduction to Engineering – E10

  10. List of profiles List of Guides Loft Command in SolidWorks Loft command creates a surface or a solid by sweeping and blending using two or more different profiles. Introduction to Engineering – E10

  11. Profile normal to the plane at the start Loft Command in SolidWorks Start and End Constraints options Profile normal to the plane at the end Introduction to Engineering – E10

  12. Loft Command in SolidWorks Loft using a single Guide Curve. Profile Guide, 3D sketch Profile Introduction to Engineering – E10

  13. Guides 1,2 Guides 1,2,3 Guides 1,2,3,4 Loft Command in SolidWorks Loft using many Guide Curves. Guide 3 Guide 4 Guide 2 Guide 1 Introduction to Engineering – E10

  14. Loft Command in SolidWorks Merging a Loft with a feature Introduction to Engineering – E10

  15. Introduction to Engineering – E10

  16. 10 spline sketches on planes .3 inches apart Introduction to Engineering – E10

  17. Example Introduction to Engineering – E10

  18. Introduction to Engineering – E10

  19. Introduction to Engineering – E10

  20. Knife handle Introduction to Engineering – E10

  21. Knife blade Hand and wrist Introduction to Engineering – E10

More Related