1 / 12

Treater Oil & Water Valves

Treater Oil & Water Valves. Treater Oil & Water Valves. Kimray Treater Valve. Treater Oil & Water Valve. Treater Valve. Balanced against upstream pressure. Weights may be added to increase liquid head. Balanced against downstream pressure or vacuum. Can be manually

Download Presentation

Treater Oil & Water Valves

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Treater Oil & Water Valves

  2. Treater Oil & Water Valves Kimray Treater Valve

  3. Treater Oil & Water Valve

  4. Treater Valve Balanced against upstream pressure Weights may be added to increase liquid head Balanced against downstream pressure or vacuum Can be manually opened and closed Standard weight holds 4 feet of liquid head Teflon packed rotary stuffing box

  5. Treater Valve Operation Vessel gas pressure Gas pressure plus liquid head Downstream pressure or vacuum

  6. Installation Notes Do not install a regulator anywhere in gas equalizing line. Do not use equalizing Line as a source of Gas for any other device. Do not bow equalizing line or water will collect and freeze or cause uneven operation Note liquid drain on gas equalizing line. Opening vent valve will cause treater valve to open.

  7. Installation Notes 12 feet 4 feet Standard weight & arm 2 weights & 29” arm

  8. Leaking stuffing box Valve will not shut off tightly Erratic Operation Freezing water on Main Diaphragm Stuffing box nut loose Salt crystals on stem Teflon packing worn Soft seat worn Removable seat worn Either diaphragm off center Stuffing box nut too tight Soft seat leaking Diaphragms hardened Infrequent draining of drip pot Trouble Shooting

  9. Repair Hints Do not over-tighten Stuffing box nut

  10. Repair Hints Tighten 4 screws evenly. Center and align diaphragm plate before bolting housing down. Do not over-tighten pivot screw.

  11. 26 DM Diaphragm Motor Valve

  12. 26 DM Diaphragm Motor Valve Equalize to gas space From Production Adjusting blocks should be moved to adjust for spread. Weight is positioned for maximum height. Supply in 15 to 20 psig. Meter Must be larger in Diameter than flow lines

More Related