1 / 31

J1587/J1708 Fault Codes for Conventional/FS65 Saf-T-Liner C2 Saf-T-Liner HDX, HD, ER

J1587/J1708 Fault Codes for Conventional/FS65 Saf-T-Liner C2 Saf-T-Liner HDX, HD, ER Saf-T-Liner EF. Table of Contents Locating the LCD & Mode button Page 2 Retrieving codes Page 3 C2 fault codes Page 4-7

miyoko
Download Presentation

J1587/J1708 Fault Codes for Conventional/FS65 Saf-T-Liner C2 Saf-T-Liner HDX, HD, ER

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. J1587/J1708 Fault Codes for Conventional/FS65 Saf-T-Liner C2 Saf-T-Liner HDX, HD, ER Saf-T-Liner EF

  2. Table of Contents Locating the LCD & Mode button Page 2 Retrieving codes Page 3 C2 fault codes Page 4-7 WABCO fault codes Page 8-9 Mercedes MBE fault codes Page 10-22 Cummins ISB, ISC fault codes Page 24-26 Caterpillar 3126, C7 Page 28-30 1

  3. Your ICU dash will display the MID numbers for the modules that have an active fault. The complete SAE formatted fault code can be retrieved via the dash. example: MID, PID or SID, FMI All ICU model dashes will display J1587 formatted fault codes; some models are connected to J1939 as well. ICU dashes can not be used to clear historic fault codes. Locate the LCD display in the center of the dash and the reset/mode button to the right 2

  4. How to retrieve active fault codes • (ICU3 and ICU4 dash models) • 1. Set parking brake • Ignition key to “on” position • Push and release mode button • Push and hold mode button • Push and release mode button • Push and release mode button • Push and release mode button • 8. For multiple codes repeat steps 4-7 diag 1(= total # offaults) Fault 1 128=engine 130=transmission 136=ABS 140=ICU 164=BHM MID PID# or SID# parameter identifier or subsystem identifier Fail # =failure mode identifier 3

  5. 4

  6. 5

  7. 6

  8. 7

  9. 8

  10. 9

  11. 10

  12. 11

  13. 12

  14. 13

  15. 14

  16. 15

  17. 16

  18. 17

  19. 18

  20. 19

  21. 20

  22. 21

  23. 22

  24. 23

  25. 24

  26. 25

  27. 26

  28. 27

  29. 28

More Related