1 / 11

MT-RJ CONNECTOR SYSTEM

MT-RJ CONNECTOR SYSTEM. Duplex SFF for FTTx applications. MT-RJ Duplex SFF connector system Compliant to IEC 61754-18 TIA/EIA 604-12 ISO/IEC 11801 EN 50377-9-1. MT-RJ C onnector. The MT-RJ has a molded body with two fibers spaced 750 µm apart. Mini-MT double fiber ferrules

morey
Download Presentation

MT-RJ CONNECTOR SYSTEM

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MT-RJ CONNECTOR SYSTEM Duplex SFF for FTTx applications

  2. MT-RJ Duplex SFF connector system Compliant to IEC 61754-18 TIA/EIA 604-12 ISO/IEC 11801 EN 50377-9-1 MT-RJ Connector

  3. The MT-RJ has a molded body with two fibers spaced 750 µm apart. Mini-MT double fiber ferrules High precision guiding pins Construction

  4. Reduced dimensions • MT-RJ connector allows the same transmission capacity within half the space. • The MT-RJ connector is half the size of duplex SC or ST-style connectors.

  5. Multiple choice • Available with Mini Zip Cord construction or a 3 mm Mini Ribbon cable with a couple fiber inside. • 50 or 62.5 mm MM fibers, as well as SM fibers. • Large multi-vendor support for active and passive components

  6. Excellent performance • The DIAMOND MT-RJ connector is our special solution for 10-100 Mbit Ethernet up to applications in Gigabit Ethernet. • ideal solution for FTT-X applications (including FTTC, FTTH and FTTD).

  7. Design • Plug and pull design with well-known RJ style latch • Installable in conventional RJ-45 faceplates • Broad area of application due to wide industry and electronics supplier acceptance and support

  8. MT-RJ Multimode values MM 0° PC Testing TIA/EIA 568 Measured Unit Insertion Loss Max. 0.75 Max. 0.5 dB (IL) (typ. 0.2) Return Loss Min. 20 Min. 20 dB (RL) (typ. 30) Repeatability of IL N/A ± 0.2 dB (500 mating cycles)

  9. MM Designation • Connector MT-RJ MM PC (male) • Connector MT-RJ MM PC (female) • MT-RJ Mating adapter

  10. MT-RJ Single Mode values SM 0° PC Requirements Measured Unit Insertion Loss Max. 0.75 Max. 1 dB (IL) Typ. (0.4) Return Loss Min. 20 Min. 40 dB (RL) Typ.(50) Repeatability of IL N/A Max. ± 0.2 dB

  11. SM Designation • Connector MT-RJ SM PC (male) • Connector MT-RJ SM PC (female) • MT-RJ Mating adapter

More Related