Best Point to Reset Router Password

1. Best Points To Reset Router Password

2. Check Out The Best 2 Routers Password SetUp • BELKIN ROUTER • TRENDNET ROUTER

3. Trendnet Router Reset Password: IT IS ALWAYS ADVISABLE TO RESET YOUR TRENDNET ROUTER PASSWORD WHEN YOU USE IT FOR THE FIRST TIME. YOU CAN ALSO RESET IT WHEN YOU WANT TO SECURE YOUR PASSWORD AND MAKE IT ACCESSIBLE ONLY FOR YOU. YOU NEED TO FOLLOW THE BELOW STEPS TO RESET YOUR TRENDNET ROUTER.

4. Steps to follow to reset the admin password of your TRENDNET router FIRSTLY, YOU NEED TO LAUNCH A WEB BROWSER AND TYPE “192.168.10.1” IN THE ADDRESS BAR. ONCE IT IS DONE, YOU NEED TO PRESS ENTER AGAIN. AFTER THAT, YOU NEED TO CLICK ON THE MAIN BUTTON AND THEN ON PASSWORD TO ENTER NEW PASSWORD, CONFIRM THEM, AND THEN CLICK APPLY. CLICK APPLY TO SETTINGS. AFTER FOLLOWING THESE STEPS, THE ADMIN PASSWORD OF YOUR ROUTER WILL BE CHANGED. STEPS TO FOLLOW TO RESET THE WI-FI PASSWORD OF YOUR TRENDNET ROUTER FIRSTLY, YOU NEED TO GET ACCESS TO THE ROUTER CONTROL PANEL BY ENTERING HTTP://192.168.10.1 IN THE ADDRESS LINE OF YOUR BROWSER. THEN YOU NEED TO LOGIN TO THE ROUTER BY TYPING YOUR USERNAME AND PASSWORD. THEN YOU NEED TO CONSTRUCT THE WIRELESS SETTINGS ON THE ROUTER BY CLICKING ON THE BASIC BUTTON AND THEN WIRELESS SWITCH. LASTLY, CHANGE THE PASSWORD OF YOUR WI-FI FROM HERE THEN CLICK ON APPLY. YOU CAN ALSO CONTACT TRENDNET ROUTER CUSTOMER SERVICE IF YOU HAVE ANY DOUBT OR WANT TO SPEAK WITH THEM DIRECTLY. • • • • • • • • •

5. Belkin Router Reset Password IF YOU NEED TO RESET THE PASSWORD OF YOUR BELKIN ROUTER, YOU NEED TO CLICK ON THE RESET BUTTON FOR REBOOTING YOUR ROUTER WHEN IT STOPS WORKING CORRECTLY. HOWEVER, PRESSING THIS BUTTON WILL NOT CHANGE THE SETTINGS OF THE ROUTER. YOU ARE REQUIRED TO LOG IN TO THE WEB-BASED ADMINISTRATION PANEL OF YOUR ROUTER AND RESET YOUR WI-FI PASSWORD.

6. Steps involved to reset your Belkin Router Password • YOU NEED TO NAVIGATE YOUR WEB BROWSER TO "192.168.2.1" IF YOU WANT TO ACCESS THE MODEM'S WEB-BASED INTERFACE. • THEN YOU NEED TO ENTER THE PASSWORD INTO THE PASSWORD TAB AND CLICK THE "SUBMIT" BUTTON TO LOG IN TO THE INTERFACE. YOU MUST BE AWARE OF THE PASSWORD YOU ARE USING AS YOU WILL NEED IT AT THE TIME OF LOGGING IN OR YOU WON'T BE ABLE TO LOG IN. IF YOU HAVE NOT SET A PASSWORD YET, YOU CAN LEAVE THE FIELD BLANK. • THEN GO TO "SYSTEM SETTINGS" IN THE UTILITY SECTION OF THE LEFT NAVIGATION PANE AND CLICK ON IT. • THERE YOU NEED TO ENTER THE NEW PASSWORD IN THE "TYPE IN CURRENT PASSWORD" FIELD. LEAVE THE FIELD BLANK IF YOU HAVE NOT SET A NEW ONE. ENTER THE NEW PASSWORD AND CONFIRM IT BY CLICKING ON THE "CONFIRM NEW PASSWORD" FIELD. THE CLICK ON THE "APPLY CHANGES "BUTTON. • IF YOU WANT TO CONFIGURE THE ROUTER, CHANGE THE TIMEOUT VALUE TO LOG YOU OUT AUTOMATICALLY AFTER A WHILE. • CLICK ON THE "APPLY CHANGES" BUTTON TO CHANGE THE PASSWORD. YOU'LL NEED TO ENTER THE NEW PASSWORD TO CONTINUE USING THE WEB INTERFACE. • YOU NEED TO PRESS THE RESET BUTTON FOR 15 SECONDS. THEN THE ROUTER WILL AUTOMATICALLY BE REBOOTED. • IF YOU FACE ANY TECHNICAL PROBLEM WHILE RESETTING YOUR PASSWORD, YOU CAN DIAL BELKIN ROUTER CUSTOMER SERVICE NUMBER AND DIRECTLY SPEAK WITH THE CUSTOMER SUPPORT TO SOLVE YOUR ISSUES. THE CUSTOMER SUPPORT OF THE BELKIN ROUTER IS AVAILABLE ROUND THE CLOCK TO ADDRESS ALL YOUR TECHNICAL ISSUES.

7. THANKS FOR WATCHING