1 / 19

Development and Application of a State-of-the-Science Plume-in-Grid Model CMAQ-APT

Development and Application of a State-of-the-Science Plume-in-Grid Model CMAQ-APT. Prakash Karamchandani, Christian Seigneur, Krish Vijayaraghavan and Shiang-Yuh Wu, AER, San Ramon, CA Alan Hansen and Naresh Kumar EPRI, Palo Alto, CA CMAQ Workshop, October 2002. Plume-in-Grid Modeling.

naava
Download Presentation

Development and Application of a State-of-the-Science Plume-in-Grid Model CMAQ-APT

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Development and Application of aState-of-the-Science Plume-in-Grid ModelCMAQ-APT Prakash Karamchandani, Christian Seigneur, Krish Vijayaraghavan and Shiang-Yuh Wu, AER, San Ramon, CA Alan Hansen and Naresh Kumar EPRI, Palo Alto, CA CMAQ Workshop, October 2002

  2. Plume-in-Grid Modeling • 3-D air quality models create an artificial dilution of stack emissions • lower concentrations of plume material • unrealistic concentrations upwind of stack • incorrect chemical reaction rates • incorrect representation of transport • Subgrid-scale representation of plumes can remove some or all of these major limitations

  3. Previous PiG Models • Previous Plume-in-Grid (PiG) models include PARIS, URM, UAM-V, CAMx and CMAQ • All these PiG representations had limitations due to a simplified treatment of plume dispersion (empirical or first-order diffusion), simplified chemical mechanism in some cases and no effect of turbulence on plume chemistry

  4. CMAQ-APT • Development of a new PiG model that uses the state-of-the-science for the host model (CMAQ) and the plume model (SCICHEM) • SCICHEM includes advanced treatments for plume dispersion (second-order diffusion) and chemistry (multistage mechanism, effect of turbulence) • CMAQ with Advanced Plume Treatment (APT)

  5. Plume Dispersion • SCICHEM uses the SCIPUFF framework to simulate plume dispersion • A myriad of puffs is released from the source to represent the plume • Puffs are split when they become too large so that the effect of wind shear and turbulence on plume dispersion are properly characterized • Puffs that overlap are merged

  6. Plume Chemistry • Plume chemistry is simulated with a chemical kinetic mechanism that evolves through three stages as the plume becomes dispersed into the background air (Karamchandani et al., 2000) • Effect of turbulence on plume chemistry can be simulated • Crosswind plume resolution can be improved by using more puffs • SCICHEM has been evaluated with plume data from SOS 95 and SOS 99

  7. Evolution of Plume Chemistry 3 2 Long-range Plume Dispersion Early Plume Dispersion Mid-range Plume Dispersion 1 Reduced VOC/NOx/O3 chemistry — acid formation from OH and NO3/N2O5 chemistry NO/NO2/O3 chemistry Full VOC/NOx/O3 chemistry — acid and O3 formation

  8. SCICHEM/CMAQ Interface Domain, grid information Geophysical data Meteorological data Deposition velocities Emissions, IC/BC I/O API I/O API chemical concentrations Models-3 CMAQ SCICHEM Point source emissions I/O API I/O API Output concentrations and deposition Dump puffs Output puff information chemical concentrations

  9. Plume Dumping Criteria • Chemical criterion: the plume has become chemically mature as determined by reaching the third stage of plume chemistry and a given threshold for the plume concentration ratio of O3 / (O3 + NO2) • Physical criterion: the plume width must exceed the host model grid size

  10. CMAQ-APT Application • Eastern United States with two nested grid domains (12 and 4 km resolution) • Episode of 11 to 15 July 1995 • MM5 simulation of Seaman and Michelson (2000) • Thirty largest NOx point sources simulated with APT • Simulation with CMAQ and CMAQ-APT • CMAQ-APT is about 1.6 times slower than CMAQ for this simulation

  11. CMAQ Surface O3 Concentrations13 July 1995, 3 p.m. 12 km domain

  12. Effect of APT PiG Treatment onSurface O3 Concentrations13 July 1995, 3 p.m. CMAQ-APT - CMAQ 12 km domain

  13. Effect of Point Source NOx Emissionson Surface O3 Concentrationswithout PiG Treatment CMAQ - Background 12 km domain

  14. Effect of Point Source NOx Emissionson Surface O3 Concentrationswith APT PiG Treatment CMAQ-APT - Background 12 km domain

  15. CMAQ Surface HNO3 Concentrations13 July 1995, 3 p.m. 12 km domain

  16. Effect of APT PiG Treatment onSurface HNO3 Concentrations13 July 1995, 3 p.m. CMAQ-APT - CMAQ 12 km domain

  17. Effect of Point Source NOx Emissionson Surface HNO3 Concentrationswithout PiG Treatment CMAQ - Background 12 km domain

  18. Effect of Point Source NOx Emissionson Surface HNO3 Concentrationswith APT PiG Treatment CMAQ-APT - Background 12 km domain

  19. Conclusions • CMAQ-APT provides an improved representation of the impact of large point sources • For isolated point sources, CMAQ-APT predicts less impact on O3 formation (up to 80 ppb less) and less impact on HNO3 formation (up to 24 ppb less) • CMAQ-APT has been subjected to a comprehensive beta-testing by three organizations • It will be applied to the California San Joaquin Valley for several CCOS episodes

More Related