1 / 8

Practice Problems Work and Mechanical Advantage

Practice Problems Work and Mechanical Advantage. 1. How much work is done on a 10 N block that is lifted 5 meters off the ground by a pulley?. Answer 50 joules or N-m . W = F x d = 10 N x 5 m.

necia
Download Presentation

Practice Problems Work and Mechanical Advantage

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Practice Problems Work and Mechanical Advantage

  2. 1. How much work is done on a 10 N block that is lifted 5 meters off the ground by a pulley? Answer 50 joules or N-m W = F x d = 10 N x 5 m

  3. 2. Vanessa lifts her book bag 1.5 meters. If the weight of the bag is 12 N, how much work did she do? W = F X d = 12 N X 1.5 m = 18 J

  4. 3. Kisha applied 20N of force to turn an ice cream freezer crank. The crank’s resistance was 60 N. What was the mechanical advantage of the crank? AMA = 60 N 20 N AMA=3

  5. 4. You lift a 45 N bag of mulch 1.2 meters and carry it a distance of 10 meters to the garden. How much work was done? W = F x d = 45 N x 1.2 m 54 joules

  6. 5. Suppose you need to remove a nail from a board by using a claw hammer. If the effort length for a claw hammer is 11.0 cm and the resistance length is 2.0 cm. What is the mechanical advantage? IMA= Effort Length Resistance Length = 11.0 cm 2.0 cm = 5.5

  7. 6. A pulley is used to raise a heavy crate. The pulley is such that an input force of 223 N is needed to provide an output force of 1784 N. What is the mechanical advantage of this pulley? = 1784 N 223 N = 8

  8. 7. A mover uses a ramp to load a crate of nails onto a truck. The crate, which must be lifted 1.4 m from the street to the bed of the truck, is pushed along the length of the ramp. If the ramp is 4.6 m long and friction between the ramp and crate can be ignored, what is the mechanical advantage of the ramp? IMA= Effort Length Resistance Length = 4.6 m 1.4 m = 3.3

More Related