1 / 46

Projections and Datums within ArcGIS

Projections and Datums within ArcGIS. Melita Kennedy. 2012 Datum Series Sponsored by GPSMMS Subcommittee. This is the third webinar in a 3-part Series on Datums. Datum Primer – Dave Doyle* GPS Software Datums - Joel Cusick / Alison Walker (Nov 18)**

netis
Download Presentation

Projections and Datums within ArcGIS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Projections and Datums within ArcGIS Melita Kennedy

  2. 2012 Datum Series Sponsored by GPSMMS Subcommittee This is the third webinar in a 3-part Series on Datums. • Datum Primer – Dave Doyle* • GPS Software Datums - Joel Cusick / Alison Walker (Nov 18)** • Projections and Datums in ArcGIS – Melita Kennedy (Dec 17)*** Tim Smith Chair; Joel Cusick Co-Chair * http://www.anymeeting.com/tgadgets/EC51DA87854B ** - Sharepoint Site – Datum Webinars *** - This Webinar Sharepoint Site – Datum Webinars

  3. Topics • Esri projection engine • Coordinate systems • Transformations • Future work • Review

  4. Esri Projection Engine

  5. Esri projection engine • One universal library for all ESRI products • pe.dll • Not tied to just one product • Improve maintenance/ease of programming • Speed, consistent results, standardization • Accuracy – tight forward/inverse round trips • Must have inversibility • Engine versus Factory

  6. Engine Objection creation & processing Transformations Projections Math functions Factory Predefined objects Coordinate systems, ellipsoids, units, etc Well-known ID lookup PE library sections

  7. 10 Angular Unit 57 Linear units 217 Spheroids 15 Prime Meridians 44 Parameters 14 Geographic methods 2 Horizontal methods 9 Vertical methods 74 Projections 607 Datums 635 GCS 1240 Geographic Transforms 3567 PCS 117 Vertical Datums 124 VCS 47 Vertical Transformations 17 Horizontal/Vertical CS Number of Objects in PE Factory Total = 6796 at 10.0

  8. 10 Angular Unit 59 Linear units 218 Spheroids 15 Prime Meridians 44 Parameters 14 Geographic methods 2 Horizontal methods 9 Vertical methods 76 Projections 644 Datums 671 GCS 1375 Geographic Transforms 4289 PCS 126 Vertical Datums 133 VCS 69 Vertical Transformations 17 Horizontal/Vertical CS Number of Objects in PE Factory Total = 7771 at 10.1.1

  9. Coordinate Systems

  10. ArcGIS 10.1 coordinate systems • Coordinate system definitions always stored in library • ‘prj files’ installed separately • At 10.1 over 5000 files • Now store the folder information in the library • Display a ‘virtual’ directory structure

  11. NAD 1983 and variant support • GCS, UTM zones, SPCS zones, Albers • NAD 1983 • NAD 1983 HARN • NAD 1983 CORS96 • NAD 1983 NSRS2007 • NAD 1983 (2011) + UTM zones • State Plane zones in 10.1.2

  12. ArcGIS 10.1 coordinate systems • User interface updated • ‘Layers’ • Listed each layer • Open to see its coordinate system • Now list each coordinate system • Open to see which layers use it

  13. spatial filter favorites create or import coordinate system search well-known ID

  14. Coordinate system search and filter • Spatial filter • Current extent • Layer extent (any in the map) • Custom extent • Search/filter by • Name • Only folders that contain matches will be shown • Well-known ID (WKID) aka 4326, 26906

  15. Favorites • Now visible (and usable) everywhere • Stored in your user profile • C:\Documents and Settings\melita\Application Data\ ESRI\Desktop10.1\ArcMap\Coordinate Systems (Windows XP) • Supports folders • Import coordinate system from • Data • Prj file NEW

  16. Coordinate System Demonstration

  17. Transformations

  18. Geographic transformations • ‘Datum’ transformations • Convert between GCS • Includes unit, prime meridian, and spheroid changes • Defined in a particular direction • All are reversible

  19. Transformation methods • Equation-based • Molodensky, Abridged Molodensky, Geocentric Translation • Coordinate Frame, Position Vector, Molodensky-Badekas • Longitude Rotation, 2D lat / lon offsets • File-based • NADCON, HARN, NTv2

  20. ArcMap 10.1 transformations • Sorted by applicability • Area of use • Accuracy • Will create compound (two-step) transformations automatically • Ex. NAD_1927_To_NAD_1983_NADCON + NAD_1983_To_WGS_1984_5

  21. Combined transformations

  22. ArcMap 10.1.1 transformations • NAD_1927_To_NAD_1983_NADCON • ArcMap default • Until 10.1.1 • No more default transformations!

  23. Transformation metadata • Areas of use • Accuracy • C:\Program Files\ArcGIS\Desktop10.1\Documentation\ geographic_transformations.pdf http://support.esri.com/en/knowledgebase/techarticles/detail/21327

  24. Methods in Alaska • Coordinate Frame • Equation-based • Seven parameters • 3 translations, 3 rotations, 1 scale factor (in XYZ) • NAD_1983_To_WGS_1984_5 • WGS_1984_(ITRF00)_To_NAD_1983 • NADCON / HARN • File-based • Generally most accurate • NAD_1927_To_NAD_1983_Alaska • No transformations released for current adjustments

  25. Transformations with same parameters (1) Officially, NAD83 (CORS96) to ITRF96* NAD_1983_To_WGS_1984_5* NAD_1983_HARN_To_WGS_1984_3 Source: http://geodesy.noaa.gov/CORS/coord_info/ coordtrans_no_support_tables.shtml *Paper: http://www.ngs.noaa.gov/CORS/Articles/SolerSnayASCE.pdf Table 1, page, 51, Last column _5 is Default for DNRGPS And ArcGIS prior to 10.0

  26. Transformations with same parameters (2) Officially, ITRF00 to NAD83 (CORS96) ITRF_2000_To_NAD_1983_CORS96 ITRF_2000_To_NAD_1983_HARN ITRF_2000_To_NAD_1983_2011 WGS_1984_(ITRF00)_To_NAD_1983_HARN WGS_1984_(ITRF00)_To_NAD_1983_CORS96 WGS_1984_(ITRF00)_To_NAD_1983_2011 WGS_1984_(ITRF00)_To_NAD_1983 Source: http://geodesy.noaa.gov/CORS/coord_info/ coordtrans_no_support_tables.shtml

  27. NGS CORS past coordinates website http://geodesy.noaa.gov/CORS/coord_info/coordtrans_no_support_tables.shtml Paper: http://www.ngs.noaa.gov/CORS/Articles/SolerSnayASCE.pdf Table 2, page, 52

  28. Transformations with same parameters (3) ITRF08/WGS84 transformations ITRF_2008_To_NAD_1983_2011 WGS_1984_(ITRF08)_To_NAD_1983_2011 Pacific Plate ITRF_2008_To_NAD_1983_PA11 WGS_1984_(ITRF08)_To_NAD_1983_PA11 Marianas Plate ITRF_2008_To_NAD_1983_MA11 WGS_1984_(ITRF08)_To_NAD_1983_MA11 Source: http://www.ngs.noaa.gov/CORS/coords.shtml

  29. NGS CORS coordinates website http://www.ngs.noaa.gov/CORS/coords.shtml

  30. Bookkeeping transformations Parameters are zeroes! ITRF_2000_To_WGS_1984 NAD_1983_CORS96_To_NAD_1983_HARN NAD_1983_CORS96_To_NAD_1983_NSRS2007 NAD_1983_CORS96_To_NAD_1983_2011 NAD_1983_HARN_To_NAD_1983_NSRS2007_1 NAD_1983_HARN_To_NAD_1983_2011 NAD_1983_NSRS2007_To_NAD_1983_2011 NAD_1983_NSRS2007_To_WGS_1984_1

  31. Geographic Transformation Demonstration

  32. Current and Future Work

  33. Geodetic features • Editing • Advanced Editing toolbar • Lines, circles, and ellipses • Geoprocessing Tools • Bearing Distance to Line • XY to Line • Table to Ellipse • Buffer • Geographic coordinate system • Calculate Grid Convergence Angle

  34. Geodetic features • Types • Geodesic • Great circle / great elliptic • Rhumb line / loxodrome • Normal section • Measure tool

  35. Future work • Vertical transformations • Customizable ‘factory’ • Limited selection of coordinate systems and transformations • 14 parameter (time-based) datum transformations

  36. Vertical transformation methods • Vertical Offset • Vertical Offset and Slope • VERTCON • Geoid models • EGM84, EGM96, EGM2008 • US geoid models • Generic model/file type for user-defined ones

  37. 14 parameter time-based transformation • Base 7 parameters are updated based on velocity values

  38. Review

  39. WGS84/ITRF Review:Datums Change Sats ITRF00 Base Provider Export Using NAD83(CONUS)CORS96 GIS SSF COR SHP

  40. How to Do it • In Garmin Workflows with DNRGPS (Formerly DNRGarmin)… • Tag all your data as “plain vanilla” “NAD83”

  41. How to Do it • In Pathfinder Office, select the Projection file to match the Exported Coordinate System. • Today tag your CORS corrected data to “CORS96” NAD83

  42. How to Do it • In ArcGIS *Assuming the standards of how the data “got to NAD83” were followed…

  43. Conclusions • As spatial references continue to evolve, it is important to understand how such evolution affects the Mapping software that we use for collecting and processing GPS data. • As we navigate to previous GPS datasets or update them (at submeter), it is extremely important to transform properly to get back to the right place • Options in the field and office GPS software can change the spatial reference of the GPS data that we collect. • Esri software options can also change the spatial reference of any GPS data we collect. • Knowing how these changes occur can eliminate much confusion and lead to satisfactory positioning results.

  44. References • Soler, T. & R.A. Snay (2004). Transforming positions and velocities between the International Terrestrial Reference Frame of 2000 and North American Datum of 1983, J. Surv. Engrg., ASCE, 130(2), 49-55. http://www.ngs.noaa.gov/CORS/Articles/SolerSnayASCE.pdf • Trimble, “GPS Pathfinder Office Software or the GPS Analyst Extension: Resolving the NAD 83 Datum Transformation Issue,” [online]. http://trl.trimble.com/docushare/dsweb/Get/Document-170369/SprtNote_PFOGPSA_NAD83Datum.pdf • Dr. Richard Snay is Retired Manager of the National Continuously Operating Reference Station (CORS) program and a geodesist with the National Geodetic Survey • http://support.esri.com/en/knowledgebase/techarticles/detail/21327

  45. Questions?

  46. Thank you!

More Related