1 / 37

Click here to add Company Name and Date

Click here to add Company Name and Date. Parker is the global leader in motion and control technologies, partnering with its customers to increase their productivity and profitability . Load-Sense Pressure Compensated Valve with Flow-Sharing (Post-Compensated).

oihane
Download Presentation

Click here to add Company Name and Date

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Click here to add Company Name and Date

  2. Parker is the global leader inmotion and control technologies, partnering with its customers to increase their productivity and profitability.

  3. Load-Sense Pressure Compensated Valve with Flow-Sharing(Post-Compensated) • 3rd Generation post-compensated valve • Target Launch – October 2006

  4. Specifications • Flows • Pump input up to 60 GPM • Work sections up to 50 GPM • Pressure 5000 PSI • Sectional construction • Max. porting • Inlet SAE 16 top and side • Work SAE 12 • Outlet SAE 16 top and SAE 20 side

  5. Model Logic V = valve P = lspc (post-compensated) 170 = max work section flow in LPM Remember the VO40: V = valve O = open center 40 = max work section flow in plum

  6. Key Features & Benefits • Flow-sharing for improved productivity, safetyand operator comfort • Load-sense pressure compensated for improved system efficiency and fuel savings • Modular design enables better match between cost and value. Available with: • Load-sense pressure compensated, with or without induced load protections • Load-sense only • Low loop pressure drops for reduced HP consumption • Low pressure regeneration to solve cavitation problems of premature component failure and “spongy” operation

  7. Key Market Drivers • Improved machine controllability and productivity • Horsepower utilization, due tier II and III engines • Fuel cost

  8. Target Markets • Wheel loaders and dozers • Launched to Deere September 2004for J Series Loaders • Cranes • Forestry – loaders, feller-bunchers, harvesters, forwarders, skidders • Refuse – side loaders • Snow and ice • Distribution

  9. Competitors • Post-Compensated • Danfoss – PVG100(new) • Husco – SX180(new) • Rexroth – SX14?(have not seen in dist’n channel) • Rexroth - M4-15(120 lpm out of work section) • Pre-Compensated • MP18 and MP22(being discontinued; Wooster closing)

  10. Flow-Sharing Adjusts to a pump over-demand conditions by reducing the flow to the selected functions, while maintaining the speed relationship between those functions The benefit - the operator can maintain the control of the machine The result - increased productivity, improved safety and operator comfort

  11. Flow-Sharing Example #1

  12. Flow-Sharing - Example #1Full pump flow is 40 GPM, but operator wants 46 GPM GPM Work sectionflows at full pump displacementof 40 GPM Operator wants 40 GPM from two work sections But now operator wants 46 GPM Only 40 GPM available, so valve goes into over-demand and divides the pump flow accordingly

  13. Flow-Sharing - Example #2

  14. Flow-Sharing - Example #2Engine RPM decreases flow from 40 GPM to 30 GPM GPM Operator wants 40 GPM from two work sections Engine rpm’s drop so max pump flow is 30 GPM; valve divides the flow accordingly Work sectionflows at full pump displacementof 40 GPM

  15. 60 50 40 F Wasted power l L.S. system 30 o w 20 Power consumed 10 by function 0 0 500 1000 1500 2000 2500 3000 3500 Pressure Improved Efficiencyof PCLS

  16. Improved Efficiencyof PCLS “A big reason for the change by Deere was mounting fuel costs. The pressure compensated load-sensing variable displacement system is a lot more fuel efficient than the open-center system, depending on operation, by as much as 30, 40, or even 50% better,” says Anders Lindstrom, Senior Systems Engineer with Parker Hannifin. “With the fuel savings I get on two of my 437Cs, I can make the payment on one.”

  17. Induced load/ transition ck Compensator Compensator 2. Load-sense pressure scompensated (PCLS) w/o induced load protection 1. Load-sense pressure compensated (PCLS) with induced load protection Modular Design Offers Three Circuit Options Load sense ck for all circuit options located between the work ports!!!

  18. Modular Design Offers Three Circuit Options Transition ck 3. Load-sense only Load sense ck for all circuit options located between the work ports !!!

  19. Circuit – PCLS with Induced Load Protection Pressure compensated load-sense (PCLS) w/ reverse flow check

  20. Circuit – PCLS without Induced Load Protection Pressure compensated load-sense (PCLS) w/o reverse flow check

  21. Circuit – LS only Load-sense valve circuit

  22. Low Loop Pressure DropPorts A/B - tank

  23. Spool Options • Types • 3 way cylinder and motor • 4 way cylinder and motor • 4 position float • Flows • Flow limited at full stroke and 250 PSI margin • GPM 8, 16, 24, 32, 45 • Additional flow limitation can be achieved with spool stroke limiters for ports A or B or both. Applies to hydraulic remote and solenoid operated. • Not flow limited • Another spool available that falls off the notch at full stroke and will try to output the full pump flow

  24. Inlet Options

  25. Inlet Options

  26. Outlet Options

  27. Low Pressure Regeneration • Low pressure regeneration • Addresses cavitation • Cavitation wreaks havoc on hydraulic components and results in spongymachine operation • During valve operation, the valve will sense if a function is cavitating and will force oil across anti-cavitation checks to fill void • If there is still a void in the hydraulic loop, when spools returned to neutral – will keep pump on stroke until a specified pressure level is achieved in the loop

  28. Robust • Endurance and fatigue testing: • Inlet, work sections and outlet fatigue tested @ 6250 PSI and 3M cycles – NO FAILURES • Load-sense checks endurance tested@ 5000 PSI and 2M cycles – NO FAILURES • Transition/induced load check tested@ 5000 PSI and 1M cycles – NO FAILURES

  29. Tank Port B Performance Enhancement • Meter-out control can increase P-A/B pressure drop, when opposite port energized • Work section body lengthened to ensure that pressure drop P/A-B not affected when meter-out control required

  30. Performance Enhancement • 4-position float work section • When work section is in the float position, traditional design will draw oil A and B tank cores • VP170 design can draw oil from: • Tank cores of ports A and B • Return flow from port B • This improves float down time and addresses potential cavitation

  31. Additional Benefits • Fly cut lands each critical area (10) means consistent metering from valve to valve • Uses same spool positioners as VA20 and PC25 — reduces cost, risk and improves delivery • Uses same port accessories as FIVE other valve series –– reduces cost, risk and improves delivery • Spool stroke of .406" longest in industry — this means more metering vs. spool stroke • One solenoid used for on/off and proportional applications

  32. Summary • Pressures to 5000 PSI • Flow range is 8-55 gpm out of the work port • Flow-sharing • Circuit options – load-sense pressure compensated or load-sense • Optional induced load protection • Optional low pressure regen and void filling scheme • Improved filling scheme during float position (4 position float work section) • Flexible, compact and cost effective EH package • Symmetrical spool for easy conversion to right or left-handed sections • Same spool positioners and port accessories as open-center counterparts • Stroke limiters available for hydraulic remote and solenoid operation • Full complement of flow-limited spools available • Easily serviceable — all checks located on top of work section

  33. VP170 Product Launch • Literature • Product Catalog HY14-2006/US • Overview Bulletin HY14-2006/US   • Service Bulletin HY14-2006-M1/US • Catalog CD HY14-2006/US • Advertisement • Product Bit • News Release • To order call 1-800-CPARKER

  34. Hydraulic Valve Solutions For Mobile & Truck Applications • http://www.parker.com/hydraulicvalve • Complete product information • Applications • Systems and subsystems

  35. Contact Us • Phone: 440-366-5200 • Fax: 440-366-5253 • Local Parker Distributor www.parker.com/hydraulicvalve

  36. Parker, your singlesource for all your Hydraulic ValveSolutions. Thank You!

More Related