1 / 45

Bruce Mayer, PE Licensed Electrical & Mechanical Engineer BMayer@ChabotCollege

Engineering 45. Solid Crystallography. Bruce Mayer, PE Licensed Electrical & Mechanical Engineer BMayer@ChabotCollege.edu. As Discussed Earlier A Unit Cell is completely Described by Six Parameters Lattice Dimensions: a, b ,c Lattice ( InterAxial ) Angles: ,  ,.

olive
Download Presentation

Bruce Mayer, PE Licensed Electrical & Mechanical Engineer BMayer@ChabotCollege

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Engineering 45 SolidCrystallography Bruce Mayer, PE Licensed Electrical & Mechanical EngineerBMayer@ChabotCollege.edu

  2. As Discussed Earlier A Unit Cell is completely Described by Six Parameters Lattice Dimensions: a, b ,c Lattice (InterAxial) Angles: ,  , Navigation within a Crystal is Performed in Fractional Units of the Lattice Dimensions a, b, c Crystal Navigation

  3. Cartesian CoOrds (x,y,z) within a Xtal are written in Standard Paren & Comma notation, but in terms of Lattice Fractions. Example Given TriClinic unit Cell at Right Point COORDINATES • Sketch the Location of the Point with Xtal CoOrds of:(1/2, 2/5, 3/4)

  4. From The CoOrd Spec, Convert measurement to Lattice Constant Fractions x → 0.5a y → 0.4b z → 0.75c To Locate Point Mark-Off Dists on the Axes Point CoOrdinate Example • Located Point (1/2, 2/5, 3/4)

  5. z z y y x x _ [001] [111] [010] [110] Crystallographic DIRECTIONS • Convention to specify crystallographic directions: 3 indices, [uvw] - reduced projections along x,y,z axes • Procedure to Determine Directions • vector through origin, or translated if parallelism is maintained • length of vector- PROJECTION on each axes is determined in terms of unit cell dimensions (a, b, c); negative index in opposite direction • reduce indices to smallest INTEGER values • enclose indices in brackets w/o commas [122]

  6. Write the Xtal Direction, [uvw] for the vector Shown Below Example  Xtal Directions • Step-1: Translate Vector to The Origin in Two SubSteps

  7. After −x Translation, Make −z Translation Example  Xtal Directions • Step-2: Project Correctly Positioned Vector onto Axes

  8. Step-3: Convert Fractional Values to Integers using LCD for 1/2 & 1/3 → 1/6 x: (−a/2)•(6/a) = −3 y: a•(6/a) = 6 z: (−2a/3)•(6/a) = −4 Step-4: Reduce to Standard Notation: Example  Xtal Directions

  9. Crystallographic PLANES • Planes within Crystals Are Designated by the MILLER Indices • The indices are simply the RECIPROCALS of the Axes Intersection Points of the Plane, with All numbers INTEGERS • e.g.: A Plane Intersects the Axes at (x,y,z) of (−4/5,3,1/2) Then The Miller indices:

  10. Miller Indices  Step by Step • MILLER INDICES specify crystallographic planes: (hkl) • Procedure to Determine Indices • If plane passes through origin, move the origin (use parallel plane) • Write the INTERCEPT for each axis in terms of lattice parameters (relative to origin) • RECIPROCALS are taken: plane parallel to axis is zero (no intercept → 1/ = 0) • Reduce indices by common factor for smallest integers • Enclose indices in Parens w/o commas

  11. Example  Miller Indices • Find The Miller Indices for the Cubic-Xtal Plane Shown Below

  12. The Miller Indices Example • In Tabular Form

  13. z y x More Miller Indices Examples • Consider the (001) Plane x y z Intercepts Reciprocals Reductions Enclosure ¥ ¥ 1 0 0 1 (none needed) (001) • Some Others

  14. FAMILIES of DIRECTIONS • Crystallographically EQUIVALENT DIRECTIONS → < V-brackets > notation • e.g., in a cubic system, • Family of <111> directions: SAME Atomic ARRANGEMENTS along those directions

  15. FAMILIES of PLANES • Crystallographically EQUIVALENT PLANES → {Curly Braces} notation • e.g., in a cubic system, • Family of {110} planes: SAME ATOMIC ARRANGEMENTS within all those planes

  16. Consider the Hex Structure at Right with 3-Axis CoOrds Hexagonal Structures Plane-C • The Miller Indices • Plane-A → (100) • Plane-B → (010) • Plane-C → (110) Plane-B • BUT • Planes A, B, & C are Crystallographically IDENTICAL • The Hex Structure has 6-Fold Symmetry • Direction [100] is NOT normal to (100) Plane Plane-A

  17. To Clear Up this Confusion add an Axis in the BASAL, or base, Plane 4-Axis, 4-Index System Plane-C • The Miller Indices now take the form of (hkil) • Plane-A → • Plane-B → • Plane-C → Plane-B Plane-A

  18. Find Direction Notation for the a1 axis-directed unit vector 4-Axis Directions • Noting the Right-Angle Projections find

  19. More 4-Axis Directions

  20. Construct Miller-Bravais (Plane) Index-Sets by the Intercept Method 4-Axis Miller-Bravais Indices Plane Plane

  21. Construct More Miller-Bravais Indices by the Intercept Method 4-Axis Miller-Bravais Indices Plane Plane

  22. The 3axis Indices 3axis↔4axis Translation • Where n  LCD/GCF needed to produce integers-only • Example [100] • The 4axis Version • Conversion Eqns • Thus with n = 1

  23. 4axis Indices CheckSum • Given 4axis indices • Directions → [uvtw] • Planes → (hkil) • Then due to Reln between a1, a2, a3

  24. Linear & Areal Atom Densities • Linear Density, LD  Number of Atoms per Unit Length On a Straight LINE • Planar Density, PD  Number of Atoms per Unit Area on a Flat PLANE • PD is also called The Areal Density • In General, LD and PD are different for Different • Crystallographic Directions • Crystallographic Planes

  25. Silicon Crystallography • Structure = DIAMOND; not ClosePacked

  26. LD & PD for Silicon • Si

  27. LD and PD For Silicon • For 100Silicon • LD on Unit Cell EDGE • For {111} Silicon • PD on (111) Plane • Use the (111) Unit Cell Plane

  28. X-Ray Diffraction → Xtal Struct. • As Noted Earlier X-Ray Diffraction (XRD) is used to determine Lattice Constants • Concept of XRD → Constructive Wave Scattering • Consider a Scattering event on 2-Waves Amplitude100% Subtracted Amplitude100% Added • Constructive Scattering • Destructive Scattering

  29. XRD Quantified • X-Rays Have WaveLengths, , That are Comparable to Atomic Dimensions • Thus an Atom’s Electrons or Ion-Core Can Scatter these X-rays per The Diagram Below Path-Length Difference

  30. The Path Length Difference is Line Segment SQT XRD Constructive Interference 1 1’ 2’ 2 • Waves 1 & 2 will be IN-Phase if the Distance SQT is an INTEGRAL Number of X-ray WaveLengths • Quantitatively • Now by Constructive Criteria Requirement • Thus the Bragg Law

  31. The InterPlanar Spacing, d, as a Function of Lattice Parameters (abc) & Miller Indices (hkl) d XRD Charateristics • By Geometry for OrthoRhombicXtals • For Cubic Xtals a = b = c, so

  32. Pb XRD Implementation • X-Ray DiffractometerSchematic • T  X-ray Transmitter • S  Sample/Specimen • C  Collector/Detector • Typical SPECTRUM • Spectrum  Intensity/Amplitude vs. Indep-Index

  33. z z z c c c y y y a a a b b b x x x X-Ray Diffraction Pattern (110) (211) Intensity (relative) (200) Diffraction angle 2θ Diffraction pattern for polycrystalline α-iron (BCC)

  34. Given Niobium, Nb with Structure = BCC X-ray = 1.659 Å (211) Plane Diffraction Angle, 2∙θ = 75.99° n = 1 (primary diff) FIND ratom d211 BCC Niobium XRD Example  Nb • Find InterPlanar Spacing by Bragg’s Law

  35. To Determine ratom need The Cubic Lattice Parameter, a Use the Plane-Spacing Equation Nb XRD cont • For the BCC Geometry by Pythagorus

  36. Nb-Hf-W plate with an electron beam weld 1 mm PolyCrystals → Grains • Most engineering materials are POLYcrystals • Each "grain" is a single crystal. • If crystals are randomly oriented, then overall component properties are not directional. • Crystal sizes typically range from 1 nm to 20 mm • (i.e., from a few to millions of atomic layers).

  37. Single vs PolyCrystals • Single Crystals -Properties vary with direction: anisotropic. -Example: the modulus of elasticity (E) in BCC iron: • Polycrystals 200 mm -Properties may/mayNot vary with direction. -If grains are randomly oriented: isotropic. (Epoly iron = 210 GPa) -If grains are textured, anisotropic. 19

  38. WhiteBoard Work • Planar-Projection (Similar to P3.48) • Given Three Plane-Views, Determine Xtal Structure Also: Find Aw

  39. All Done for Today xTal PlanesinSimple CubicUnit Cell

  40. Planar Projection 101 101

  41. Planar Projection

More Related