1 / 3

Wavlink AX1800 Extender Setup

Visit our website for more information regarding Wavlink Extender Setup

oliversebastian
Download Presentation

Wavlink AX1800 Extender Setup

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Wavlink AX1800 Extender Setup Wavlink AX1800 setup instructions. Say good-bye to dead spots in your home or workplace thanks to the Wavlink AX1800 WN583AX1 WIFI repeater. It is a dual-band wifi 6-mesh extender (2.4G 573Mbps + 5G 1201 Mbps, with aggregate speeds up to 1800 Mbps). It offers an 80 Mhz bandwidth for increased capacity and efficiency. You will be able to increase the range of your current router after a successful Wavlink AX1800 setup, allowing you to use the internet in remote locations of your home or office.

  2. The instructions for Wavlink AX1800 setup are as follows: • Turn on your AX1800 after unpacking it. • Once it flashes a firm green signal, turn on the device by pressing the power button. • Ensure that the repeater is positioned close to the primary router. • Connect to the Ap Extender Configuration _Ext. • Open any web browser, then go to Ap.setup or Wavlink IP address i.e 192.168.10.1. • the setup page for the Wavlink extender. • Put your unique information here to create your Ap login account. • To finish the setup process, adhere to the on-screen instructions. • After that, unplug your WN583AX1 and plug it in where you want it. You can configure your Wavlink AX1800 in this manner. The wifi secured setup is a different installation method for your WIFI range extender that will be covered in the following article (WPS).

  3. How do I set up my extender, a Wavlink AX1800 WN583AX1? Let's get acquainted with another option, the WPS method, which is commonly regarded as the quickest and easiest way to configure your Wavlink repeater. You will be able to customise your Wavlink AX1800 WPS extender in less than two minutes after completing the Wavlink AX1800 WPS setup. Let's examine how the WPS method functions. Follow the instructions below to your Wavlink AX1800 setup using WPS: • Start your Wavlink AX1800. • Put it near your current router/modem. • Press and hold the WPS button on your WN583AX1. • Now, on your router, tap the same button. • When the WPS light becomes solid green. • It indicates that the link between your router and extender has been formed. • You can now unplug the booster and place it in the area with dead spots. • You can configure your Wavlink AX1800 in this manner using wireless protected setup.

More Related