1 / 67

CNC MACHINES AND CMM FOR DESIGN STUDIOS

CNC MACHINES AND CMM FOR DESIGN STUDIOS. About. Located in Michigan, USA (near Detroit) Building Machine Since 1967 Design Studio Machines Since 1983 95 workers, 18,000 Square Meters In-House Software to Machine Fabrication. MACHINE RANGE. MSM / CMM with Clay Milling Capability

oriana
Download Presentation

CNC MACHINES AND CMM FOR DESIGN STUDIOS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CNC MACHINES AND CMM FOR DESIGN STUDIOS

  2. About • Located in Michigan, USA (near Detroit) • Building Machine Since 1967 • Design Studio Machines Since 1983 • 95 workers, 18,000 Square Meters • In-House Software to Machine Fabrication

  3. MACHINE RANGE • MSM / CMM with Clay Milling Capability • Studio Modeling Table for Clay Scale Models • Light / Medium 5 Axis for Clay and Foam • Heavy 5 Axis for Clay, Foam, Tooling Boards

  4. CUSTOMERS

  5. MSM FOR CLAY MILLING • Lowest investment and installation price • Quietest, safest, easiest to use • Very good clay milling quality • Not suitable for hard foam, polystyrene OK with proper technique • Portable and Fixed Versions Available • TARUS CNC only

  6. Base-Rail MSM

  7. Portable MSM • Same Features and Performance as Base Rail MSM • Available in 1930, 2440 and 3050 mm lengths • Utilize Air Cushions and Wheels for Moving • Works best with Surface Plate or Rail for Location and Alignment

  8. Studio Modeling Table • For 1:3 Scale Exterior Models • For 1:1 Instrument Panel, Door, Center Console and Pillar Models • Portable, no installation needed • Ergonomic, east to use • 3 milling axes, 3 additional Axes for positioning Model

  9. 5 Axis Claymill • 5 axis CNC Machine Tool, not a CMM • Portable Machine with Pinion or Ballscrew Drive • Fixed Rail Machine with Linear Motor Drive • Suitable for Milling Clay, Polystyrene and PU Foam up to 500 mg / meter3 • Available CNC; TARUS, FANUC, HEIDENHAIN

  10. Fixed Rail 5 Axis Claymill • Linear Motors, up to .2 G acceleration and 50 meters / minute maximum feedrate • Bolt rail to floor or build into plate • Unlimited Length for X Axis • Top covers for base safe to walk on

  11. Portable 5 Axis • Mobile, Air Cushions and Wheels • Automatic Leveling System (CNC or PLC) • Best used with Surface Plate • Must be moved 3 times (4 positions) for typical car model • Best when budget does not allow for multiple fixed machines and / or customer does not want to move the clay model

More Related