1 / 49

Outline of the Talk

A Low Temperature Technology on the Base of Hydrogen Enhanced Thermal Donor Formation for Future High-Voltage Applications. R. Job 1 , A.G. Ulyashin 1 , W.R. Fahrner 1 , 1 University of Hagen, Dept. of Electrical Engineering and Information Technology (LGBE), Germany

orien
Download Presentation

Outline of the Talk

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. A Low Temperature Technology on the Base of Hydrogen Enhanced Thermal Donor Formation for Future High-Voltage Applications R. Job 1, A.G. Ulyashin 1, W.R. Fahrner 1,1 University of Hagen, Dept. of Electrical Engineering and Information Technology (LGBE), Germany F.J. Niedernostheide 2, H.J. Schulze 2, 2 Infineon AG, Munich, Germany E. Simoen 3, C.L. Claeys 3, 4, 3 IMEC, Leuven, Belgium 4 University of Leuven (KU), Dept. of Electrical Engineering, Belgium G. Tonelli 5 5 INFN, Pisa, Italy

  2. Outline of the Talk • Introduction • Experimental(substrates, H-plasma treatments & annealing) • Experimental Results (analysis by SRP measurements, I-V and C-V curves, DLTS, Raman spectroscopy, SEM, TEM ) • Discussion (low temperature doping by thermal donors  low thermal budget technology for special devices,i.e. high-voltage devices, radiation detectors, etc.) • Summary Dr. Reinhart Job, University of Hagen, Germany

  3. Thermal Donors (TDs) • 'Old thermal donors' (TDs), oxygen related double donors (TDDs) • formation atT  300 - 500 °C • T > 550 °C  TDs are dissolved • family of 'bistable' double donors TDD1, TDD2, ... , TDD16, ... (?) • classification by IR-absorption spectroscopy • 2 energy levels of the donor: 70 meV, 150 meV • formation rate R correlated with [Oi] and [Cs]: [Oi] high  R high, [Cs] high  R low • Our investigations: 'Old thermal donors' (i.e. TDDs) • Other types of TDs: NDs, NTDs, STDs Dr. Reinhart Job, University of Hagen, Germany

  4. Thermal Donors • 'New donors' (NDs) • formation at T  550 - 800 °C • R correlated with [Oi] and [Cs]: [Oi] high  R high, [Cs] high  R high • energy level of the donor: 17 meV • 'New thermal donors' (NTDs) • formation at T  300 - 500 °C • NTDs appear only after very long annealing times (> 105 min) • NTDs  double donors • large agglomerates of oxygen (?) • 'Shallow thermal donors' (STDs) • formation at T  300 - 500 °C (low concentrations) • family of 7 single donors Dr. Reinhart Job, University of Hagen, Germany

  5. Low Thermal Budget Doping by Thermal Donors • Hydrogen enhances thermal donor (TD) formation in Cz silicon • Thermal donors: 'old' TDs, i.e. TDDs (oxygen related double donors) • Counter doping of initial p-type Cz Si by hydrogen enhanced TD formation  formation of deep p-n junctions • Developed process routes:- "1-step-process"- "2-step-process" Dr. Reinhart Job, University of Hagen, Germany

  6. Experimental • Substrates: • p-type Cz Silicon wafers( = 3 inches, d  370 - 380 µm, (100)-oriented) Impurities:[Oi]  7 - 81017 cm-3 (specified, IR-Absorption)[Cs] < 51016 cm-3 (specified) Doping: = 12 - 20 cm,  = 5 - 10 cm,  = 1 - 2 cm[B]  61014 cm-3 - 1.31016 cm-3 Dr. Reinhart Job, University of Hagen, Germany

  7. Experimental Applied measurements: “Spreading-Resistance-Probe”- (SRP-) measurements- resistance profiles in dependence on the depth- estimation of the location of p-n junctions Thermoelectrical Microprobe Method (‘Seebeck-Effect’)- determination of the type of doping (n-type / p-type) C(V) measurements- characterization of p-n junctions due to TD formation Infrared- (IR-) absorption measurements- characterization of TD types (”TDDi- family") I(V) measurements- characterization of diodes (”TD-Diodes”) Dr. Reinhart Job, University of Hagen, Germany

  8. "1-Step-Process" for TD Formation • Hydrogen enhanced TD formation in Cz Si onlyby H-plasma treatment • "1-step-process":TDD formation during H-plasma treatment(Tplasma = 400 - 450 °C, tplasma 30 min) • Cz Si wafers: [B] = 11015 cm-3, [Oi] = 7 - 81017 cm-3 • Example: DC plasma treatment (RIE setup, 500 V plate voltage, 440 µA/cm2) formation of TDDs, [TDD]  11016 cm-3 formation of deep p-n junctions (counter doping) Dr. Reinhart Job, University of Hagen, Germany

  9. Formation of p-n Junctions ("1-Step-Process") SRP measurements:  p-n junction location Substrate:12 cm Cz Si, [B] = 11015 cm-3(p-type) H-Plasma:30 min at 400 °C (1-step-process) Dr. Reinhart Job, University of Hagen, Germany

  10. Formation of p-n Junctions ("1-Step-Process") Free carrier concen-tration Nc in depen-dence on the depth Substrate:12 cm Cz Si, [B] = 11015 cm-3(p-type) H-Plasma:30 min at 400 °C (1-step-process) Dr. Reinhart Job, University of Hagen, Germany

  11. Formation of p-n Junctions ("1-Step-Process") Electron concentra-tion Ne(TD) due to TDDs in dependence on the depth Substrate:12 cm Cz Si, [B] = 11015 cm-3(p-type) H-Plasma:30 min at 400 °C (1-step-process) Dr. Reinhart Job, University of Hagen, Germany

  12. Formation of p-n Junctions ("1-Step-Process") C(V) measurements: C-3  Vbias  linear graded junction Substrate:12 cm Cz Si, [B] = 11015 cm-3(p-type) H-Plasma:30 min at 400 °C (1-step-process) Dr. Reinhart Job, University of Hagen, Germany

  13. Formation of p-n Junctions ("1-Step-Process") SRP measurements:  p-n junction location Substrate:12 cm Cz Si, [B] = 11015 cm-3(p-type) H-Plasma:45 min at 400 °C (1-step-process) Dr. Reinhart Job, University of Hagen, Germany

  14. Formation of p-n Junctions ("1-Step-Process") Free carrier concen-tration Nc in depen-dence on the depth Substrate:12 cm Cz Si, [B] = 11015 cm-3(p-type) H-Plasma:45 min at 400 °C (1-step-process) Dr. Reinhart Job, University of Hagen, Germany

  15. Formation of p-n Junctions ("1-Step-Process") SRP measurements: p-n junction depth in dependence on the initial p-type doping Substrate:1, 12 cm Cz Si, [B]  1015, 1016 cm-3(p-type) H-Plasma:120 min at 400 °C (1-step-process) Dr. Reinhart Job, University of Hagen, Germany

  16. Formation of p-n Junctions ("1-Step-Process") SRP measurements: p-n junction depth in dependence on the amount of incorpo-rated hydrogen Substrate:12 cm Cz Si, [B] = 11015 cm-3(p-type) H-Plasma:120 min at 400 °C (1-step-process) Dr. Reinhart Job, University of Hagen, Germany

  17. Formation of p-n Junctions ("1-Step-Process") C(V) measurements: Ne(TD) in dependen-ce on the hydrogen dose Substrate:12 cm Cz Si, [B] = 11015 cm-3(p-type) H-Plasma:at 400 °C (1-step-process) Dr. Reinhart Job, University of Hagen, Germany

  18. Formation of p-n Junctions ("1-Step-Process") SRP measurements: p-n junction depth in dependence on the plasma treatment time Substrate:12 cm Cz Si, [B] = 11015 cm-3(p-type) H-Plasma:30 - 120 min at 400 °C (1-step-process) Dr. Reinhart Job, University of Hagen, Germany

  19. Kinetic Analysis of the "1-Step-Process" Time dependences of H and H2 concentrations: DH: diffusion constant of atomic hydrogen K1 : rate of H2 formation K2 : dissociation constant of H2 molecules Dr. Reinhart Job, University of Hagen, Germany

  20. Kinetic Analysis of the "1-Step-Process" K1 : rate of H2 formation K2 : dissociation constant of H2 molecules DH: "Van Wieringen-Warmholtz" relation diffusion constant R0 : capture radius (R0 = 5 Å *))  : vibration frequency of the dissociation of H2 Eb: binding energy (Eb = 1.6 eV) *) J.T. Borenstein et al., J. Appl. Phys. 73, 2751 (1993) Dr. Reinhart Job, University of Hagen, Germany

  21. Kinetic Analysis of the "1-Step-Process" Time dependence of [TD] : NTD: concentration of thermal double donors ("TDD")  compensation (p-n junction): 2 [NTD] = [B] K3 : free parameter (deduced by fitting of experimental data) K3 = 3.810-2 s-2 Boundary condition: x = 0, t  0: [H0], with [H0] = 1014 cm-3 (constant hydrogen concentration at the wafer surface) Dr. Reinhart Job, University of Hagen, Germany

  22. Formation of p-n Junctions ("1-Step-Process") Simulated curves: [TDD], [H], [H2] in dependence on the depth Assumption:T = 400 °Ct = 30 min(1-step-process)[TDD]-profile: K3 = 3.810-2 s-2(Fit to exp. Data) Dr. Reinhart Job, University of Hagen, Germany

  23. Formation of p-n Junctions ("1-Step-Process") Comparison of simulated [TD] profiles & experimental data Assumption:T = 400 °Ct = 30, 45, 120 min(1-step-process)Fit to exp. Data:  K3 = 3.810-2 s-2 Dr. Reinhart Job, University of Hagen, Germany

  24. Kinetic Analysis of the "1-Step-Process" Summary / Conclusions: • "1-Step-Process":  various processes occur • T > 200 °C  no acceptor passivation • incorporation of hydrogen from the plasma ambient • formation and decay of H2 complexes • diffusion of H via interstitial lattice sites • H lowers the barrier for the diffusion of Oi • probability is enhanced that Oi forms a TD complex  hydrogen supports the TD formation • loss of Oi due to the incorporation of Oi into TD-complexes Question: Charge state of hydrogen (H0, H+, H-) ? Dr. Reinhart Job, University of Hagen, Germany

  25. "2-Step-Process" for TD Formation • Hydrogen enhanced TD formation in Cz Si by H-plasma treatment and subsequent annealing • "2-step-process":TDD formation during post-hydrogenation annealing- H-plasma exposure: Tplasma 250 °C, tplasma= 60 min - annealing: Tanneal 450 °C, tanneal 15 min • Cz Si wafers: [B] = 11015 cm-3, [Oi] = 7 - 81017 cm-3 • Example: PECVD plasma treatment (110 Mhz, 50 W, 440 µA/cm2) formation TDDs / p-n junctions, [TDD]  11016 cm-3 Dr. Reinhart Job, University of Hagen, Germany

  26. Formation of p-n Junctions ("2-Step-Process") SRP measurements: p-n junction depth in dependence on the post-hydrogenation annealing time Substrate:1.8 - 2.6 cm Cz Si, [B]  71015 cm-3(p-type) H-Plasma:60 min at 250 °C Annealing:at 450 °C/air Dr. Reinhart Job, University of Hagen, Germany

  27. Formation of p-n Junctions ("2-Step-Process") SRP measurements: p-n junction depth in dependence on the post-hydrogenation annealing time Substrate:5 - 10 cm Cz Si, [B]  21015 cm-3(p-type) H-Plasma:60 min at 250 °C Annealing:at 450 °C/air Dr. Reinhart Job, University of Hagen, Germany

  28. Kinetic Analysis of the "2-Step-Process" • "2-step-process": 60 min RF H-plasma at  250 °C + annealing at 450 °C/air • Hydrogen supports the formation of TDs, i.e. TDDs • Supposition: TD formation / depth of p-n junctions penetration of n-type regions into the wafer bulk are driven by H diffusion • "Fick's Diffusion Law": [H]: hydrogen concentration, D: diffusion constant, t: time, Dr. Reinhart Job, University of Hagen, Germany

  29. Kinetic Analysis of the "2-Step-Process" • "Fick's Law": • if D = const.  (D: diffusion constant, d: depth, t: time, [H0]: surface concentration) • mean diffusion length: • assume:p-n junction depth dpn proportional to diffusion length L: dpn  L, i.e.dpn  t1/2 Dr. Reinhart Job, University of Hagen, Germany

  30. Formation of p-n Junctions ("2-Step-Process") p-n junction depth:  description by the "Fick's diffusion law" (D: diffusion constant) linear slope D = 2.9 10-7 cm2s-1(5 - 10 cm Cz Si) D = 7.9 10-7 cm2s-1(1.8 - 2.6 cm Cz Si) Dr. Reinhart Job, University of Hagen, Germany

  31. Kinetic Analysis of the "2-Step-Process" • Relation of Van Wieringen and Warmholtz (VWW): (Ea = 0.48 eV) • VWW equation holds for atomic hydrogen ! • extrapolation to 450 °C:DVWW = 4.36 10-6 cm2/s • experiment: D  7.9 10-7 cm2s-1 (1  cm Cz Si)D  2.9 10-6 cm2s-1 (5  cm Cz Si) Dr. Reinhart Job, University of Hagen, Germany

  32. Formation of p-n Junctions ("2-Step-Process") RF H-plasma exposure at room temperature:  p-n junction formation only after long time annealing at 450 °C (t > 8 hours) Substrate:12 - 20 cm Cz Si, [B]  1.11015 cm-3(p-type) H-Plasma:60 min at RTAnnealing:at 450 °C/air Dr. Reinhart Job, University of Hagen, Germany

  33. Kinetic Analysis of the "2-Step-Process" Summary / Conclusions (1): • Hydrogen is amphoteric (standard model: H+ in p-type Si, H0 and H- in n-type Si) • Estimated diffusion constants  neutral atomic hydrogen H0 plays the major role for the TD formation • H0 is responsible for the enhancement of the TD formation in p-type and n-type Cz Si • D(H0) is several orders of magnitude larger than the diffusion constant D(H+) of positively charged H+ ions D(H0)/D(H+)  105*) *) D. Matthiot, Phys. Rev. B 40, 5867 (1989) Dr. Reinhart Job, University of Hagen, Germany

  34. Kinetic Analysis of the "2-Step-Process" Summary / Conclusions (2): • "2-Step-Process":  various processes occur • T > 200 °C  no acceptor passivation occurs • T  250 °C  immobile hydrogen complexes are created • T  400 - 450 °C  immobile hydrogen complexes are dissolved high concentration of mobile H0 • diffusion of H0 via interstitial lattice sites • H0 lowers the barrier for the migration of Oi • probability is enhanced that Oi forms a TD complex  hydrogen supports the TD formation Dr. Reinhart Job, University of Hagen, Germany

  35. Kinetic Analysis of the "2-Step-Process" Summary / Conclusions (3): • Dominant reaction at T 250 °C (H-plasma treatment): H+ +H0  H2 + h+ *) (H+, H0: hydrogen in positive, neutral state, h+: hole, compensated by crystal field) *) S.M. Myers et al., Rev. Mod. Phys. 64, 559 (1992) •  immobile H2 species: "zero spin clusters (ZSC)" • Dominant reaction at T 450 °C (annealing): decay of ZSCs large concentration of H0 • "2-step-process"  indirect way for H0 incorporation "1-step-process"  direct way for H0 incorporation Dr. Reinhart Job, University of Hagen, Germany

  36. Formation of Extremely Deep p-n Junctions SRP measurements: ultra-deep p-n junc-tion in highly oxidi-zed Cz Si [Oi] = 1.151018 cm-3 Substrate:12 cm Cz Si, [B]  11015 cm-3(p-type) H-Plasma:60 min at 450 °C µ-wave H-plasma (1-step-process) Dr. Reinhart Job, University of Hagen, Germany

  37. Formation of Extremely Deep Graded Doping SRP measurements: ultra-deep graded doping in highly oxidized Cz Si [Oi] = 1.21018 cm-3 Substrate:5 cm Cz Si, [P]  11015 cm-3(n-type) H-Plasma:60 min at 450 °C µ-wave H-plasma (1-step-process) Dr. Reinhart Job, University of Hagen, Germany

  38. Hydrogen Enhanced Thermal Donor Formation IR-absorption measurements: verification of TDDs (neutral species up to the 5th generation) Substrate:12 cm Cz Si, [B]  11015 cm-3(p-type) [Oi] = 1.151018 cm-3 H-Plasma:60 min at 450 °C µ-wave H-plasma (1-step-process) Dr. Reinhart Job, University of Hagen, Germany

  39. Hydrogen Enhanced Thermal Donor Formation IR-absorption measurements: verification of TDD+s (singly ionized spe-cies up to the 5th generation)Substrate:12 cm Cz Si, [B]  11015 cm-3(p-type) [Oi] = 1.151018 cm-3 H-Plasma:60 min at 450 °C µ-wave H-plasma (1-step-process) Dr. Reinhart Job, University of Hagen, Germany

  40. Hydrogen Enhanced Thermal Donor Formation IR-absorption measurements: verification of TDDs (neutral species up to the 5th generation)Substrate:5 cm Cz Si, [P]  11015 cm-3(n-type) [Oi] = 1.21018 cm-3 H-Plasma:8 h at 270 °C1 h at 450 °C µ-wave H-plasma (1-step-process) Dr. Reinhart Job, University of Hagen, Germany

  41. Hydrogen Enhanced Thermal Donor Formation IR-absorption measurements: verification of TDDs (neutral species up to the 5th generation)Substrate:5 cm Cz Si, [P]  11015 cm-3(n-type) [Oi] = 1.21018 cm-3 H-Plasma:8 h at 270 °CAnnealing:1 h / 4 h at 450 °C/air(2-step-process) Dr. Reinhart Job, University of Hagen, Germany

  42. Formation of Diodes by Thermal Donor Doping • Substrates: • p-type Cz Si (1.8 - 2.6  cm , 5 - 10  cm, 12 - 20  cm)[B]  6 1014 cm-3 - 1.3 1016 cm-3[Oi] = 7  8 1017 cm-3, [Cs] < 5 1016 cm-3 • TD formation (plasma treatment / annealing): • H-plasma: µ-wave 2.45 GHz, tpl = 30 min, Tpl = 450 °Cannealing: no annealing (1-step-process: TD-diode No. 1) • H-plasma: 110 MHz, 50 W, tpl = 60 min, Tpl = 250 °Cannealing: tann = 20 or 30 min, Tann = 450 °C/air(2-step-process: TD-diodes No. 2, 3) also alternative plasma hydrogenation possible: • H-plasma: DC, 500 V, Tpl = 400 - 450 °C, tpl 30 min (1-step-process) Dr. Reinhart Job, University of Hagen, Germany

  43. Formation of Diodes by Thermal Donor Doping TD-diode (No. 1): contact area: 1 mm2 - SRP profile p-n junction depth: d = 40 µm - I(V) curves at T = RT Substrate:12 - 20 cm Cz Si H-Plasma:30 min at 450 °C µ-wave H-plasma (1-step-process) Dr. Reinhart Job, University of Hagen, Germany

  44. Formation of Diodes by Thermal Donor Doping TD-diode (No. 2): contact area: 1 cm2 - SRP profile p-n junction depth: d  170 µm - I(V) curves at T = RT Substrate:12 - 20 cm Cz Si H-Plasma:60 min at 250 °C Annealing:30 min 450 °C/air (2-step-process) Dr. Reinhart Job, University of Hagen, Germany

  45. Formation of Diodes by Thermal Donor Doping TD-diode (No. 1): contact area: 1 mm2 (1-step-process) TD-diode (No. 2): contact area: 1 cm2 (2-step-process)  Comparison I(V) curves at T = RT:  Data normalized to contact size ! Dr. Reinhart Job, University of Hagen, Germany

  46. Analysis of TD-Diodes TD-diode (No. 1): contact area: 1 mm2 - I(V) curves at T = RT  150 °C Substrate:12 - 20 cm Cz Si H-Plasma:30 min at 450 °C µ-wave H-plasma (1-step-process) Dr. Reinhart Job, University of Hagen, Germany

  47. Analysis of TD-Diodes TD-diode (No. 1): contact area: 1 mm2 - C(V) measurements linear slope  C  V-3linearly graded p-n junction(if C  V-2 abrupt junction) Substrate:12 - 20 cm Cz Si H-Plasma:30 min at 450 °C µ-wave H-plasma (1-step-process) Dr. Reinhart Job, University of Hagen, Germany

  48. Analysis of TD-Diodes / Wafer Mapping TD-diode (No. 3): contact area: 1 mm2 - p-n junction depth: d  100 µm - I(V) curves, mapping at T = RT Substrate:12 - 20 cm Cz Si H-Plasma:60 min at 250 °C Annealing:20 min 450 °C/air (2-step-process) Dr. Reinhart Job, University of Hagen, Germany

  49. Summary • appropriate plasma hydrogenation  enhanced TD formation • counter doping of p-type Cz Si can occurs due to TDs  formation of deep p-n junctions (low thermal budget < 500 °C, process time  1 hour) • graded doping in n-type Cz Si • p-n junction formation due to TDs  rapid and low thermal budget technology for high voltage or power device applications Dr. Reinhart Job, University of Hagen, Germany

More Related