1 / 8

Modifying Parasolid Extrusions in SolidWorks: A Step-by-Step Guide

Learn how to modify Parasolid extrusions within SolidWorks by following these 6 simple steps. From loading the extrusion to setting desired length, this guide covers essential techniques.

pdykes
Download Presentation

Modifying Parasolid Extrusions in SolidWorks: A Step-by-Step Guide

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Modifying Parasolid Extrusions Within SolidWorks

  2. Step 1: Load desired extrusion into SolidWorks

  3. Step 2: Highlight Face to be extruded

  4. Step 3: Select Sketch Mode and Convert Entities command within Sketch Mode

  5. Step 4: Ensure all entities have been copied and select any additional entities to convert to sketch

  6. Step 5: Select Feature Mode - Extrusion

  7. Step 6: Enter desired extrusion lengthNote: Model is typically converted into SolidWorks at 1” so keep this in mind when entering your desired length.

  8. Tip: Use the furthest edges of the extrusions as reference planes while creating assembly mates

More Related