1 / 16

Frequency Plots

Frequency Plots. CA/PA-RCA : Basic Tool. Sector Enterprise Quality Northrop Grumman Corporation Integrated Systems. Why use frequency plots. Summarizes data from a process and graphically presents the frequency distribution in bar form

Download Presentation

Frequency Plots

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Frequency Plots CA/PA-RCA : Basic Tool Sector Enterprise Quality Northrop Grumman Corporation Integrated Systems

  2. Why use frequency plots • Summarizes data from a process and graphically presents the frequency distribution in bar form • Helps to answer the question whether the process is capable of meeting customer requirements

  3. When to use the frequency plots • To display large amounts of data that are difficult to interpret in tabular form • To show the relative frequency of occurrence of the various data values • To reveal the centering, spread and variation of the data • To illustrate quickly the underlying distribution of the data

  4. 10 9 8 7 6 5 4 3 2 1 0 4:00 4:05 4:10 4:15 4:20 4:25 4:30 4:35 4:40 4:45 4:50 4:55 5:00 5:05 Frequency Plot Features Height of column indicates how often that data value occurred Target time Label target and/or specifications Overall shape shows how the data is distributed

  5. How to construct a frequency plot • Decide on the process measure • Gather data (at least 50 data points) • Prepare a frequency table of the data • Count the number of data points • Calculate the range • Determine the number of class intervals • Determine the class width • Construct the frequency table • Draw a frequency plot (histogram) of the table • Interpret the graph

  6. What to look for on a frequency plot • Center of the data • Range of the data • Shape of the distribution • Comparison with target and specification • Any irregularities

  7. Bell shaped. Symmetric. Common Shapes of Frequency Plots If a frequency plot shows a bell-shaped, symmetric distribution: • Conclude – No special causes indicated but the distribution; data may come from a stable process (Caution: special causes may appear on a time plot or control chart). • Action – Make fundamental changes to improve a stable process (common cause strategy).

  8. Two humps. Bimodal. Common Shapes of Frequency Plots (cont’d) • If a frequency plot shows a two-humped, bimodal distribution: • Conclude – What we thought was one process operates like two processes (two sets of operating conditions with two sets of output) • Action – Use stratification or other analysis techniques to seek out causes for two humps; be wary of reacting to a time plot or control chart for data with this distribution

  9. Long tail. Not symmetric. Common Shapes of Frequency Plots (cont’d) • If a frequency plot shows a long-tailed distribution (is not symmetric): • Conclude – Data may come from a process that is not easily explained with simple mathematical assumptions (like normality). A long-tailed pattern is very common when measuring time or counting problems. • Action – You’ll need to use most data analysis techniques with caution when data has a long-tailed distribution. Some will lead to false conclusions. • For example, the control limit calculations are based on the assumption that the data have a bell-shaped curve. Calculating control limits for data with a long-tailed distribution will likely make you overreact to common cause variation and miss some special causes. Other tests that rely on normality include hypotheses tests, ANOVA, and regression. • To deal with data with this kind of distribution, you may need to transform it.

  10. Basicallyflat. Common Shapes of Frequency Plots (cont’d) • If a frequency plot shows a basically flat distribution: • Conclude – Process may be “drifting” over time or process may be a mix of many operating conditions. • Action – Use time plots to track over time; look for possible stratifying factors; standardize the process.

  11. Common Shapes of Frequency Plots (cont’d) • If a frequency plot shows one or more outliers: • Conclude – Outlier data points are likely the result of clerical error or something unusual happening in the process. • Action – Confirm outliers are not clerical error; treat like a special cause. One or more outliers.

  12. 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 Five or fewer distinct values. Common Shapes of Frequency Plots (cont’d) • If a frequency plot shows five or fewer distinct values: • Conclude – Measuring device not sensitive enough or the measurement scale is not fine enough. • Action – Fine tune measurements by recording additional decimal points.

  13. Large pile-up around a minimum or maximum value Common Shapes of Frequency Plots (cont’d) • If a frequency plot shows a large pile-up of data points: • Conclude – A sharp cut-off point occurs if the measurement instrument is incapable of reading across the complete range of data, or when people ignore data that goes beyond a certain limit. • Action – Improve measurement devices. Eliminate fear of reprisals for recording “unacceptable” data.

  14. One value is extremely common Common Shapes of Frequency Plots (cont’d) • If a frequency plot has one value that is extremely common: • Conclude – When one value appears far more commonly than any other value, the measuring instrument may be damaged or hard to read, or the person recording the data may have a subconscious bias. • Action – Check measurement instruments. Check data collection procedures.

  15. Saw-tooth pattern Common Shapes of Frequency Plots (cont’d) • If a frequency plot shows a saw-tooth pattern: • Conclude – When data appear in alternating heights, the recorder may have a subconscious bias for even (or odd) numbers, the measuring instrument may be easier to read at odd or even numbers, or the data values may be rounded incorrectly. • Action – Check measuring instrument and procedures.

  16. Frequency Plots Questions? Call or e-mail: Bob Ollerton 310-332-1972/310-350-9121 robert.ollerton@ngc.com

More Related