1 / 22

Motor Packages

Motor Packages. Solder 100K resistors (R11,R12,R14,R15). Solder 1K Resistors (R1,R2,R3,R4,R5,R6,R8,R9). Solder 2x3 Header. Add 2 jumpers to 3x2 header. Quad package solder (R24) as shown. Otherwise add a 100 ohm resistor to (R24).

phiala
Download Presentation

Motor Packages

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Motor Packages

  2. Solder 100K resistors (R11,R12,R14,R15)

  3. Solder 1K Resistors (R1,R2,R3,R4,R5,R6,R8,R9)

  4. Solder 2x3 Header

  5. Add 2 jumpers to 3x2 header

  6. Quad package solder (R24) as shown. Otherwise add a 100 ohm resistor to (R24)

  7. Place l6205. Do not solder chip.But do solder the heatsink.

  8. Solder (D1,D2)

  9. Solder 47pf(470) to (C23,C24)

  10. Solder .22uf(224) to C26. Also add .01uf(103) to (C25)

  11. Solder .1uf(104) to (C14)

  12. Add 100uf electrolytic to (C17). Long lead goes to +. – on these caps are also marked

  13. Solder l6205

  14. Add 4 pin terminal

  15. Add screw terms. Either side of board. It does not matter.

  16. Place second l6205, do not solder. But do solder the heatsink.

  17. Solder 47pf(470) to (C9,C12)

  18. Solder .22uf(224) to (C11)

  19. Solder .1uf(104) to (C13)

  20. Solder electrolytic to (C10) Long lead goes to +. Cap is also marked with – on the - side

  21. Solder second l6205

  22. Solder 4 pin term

More Related