1 / 18

Partial Proposal: 11n Physical Layer

This partial proposal discusses the VISA-based MIMO processing, PLCP frame structure, and 2 and 4 Tx antenna MIMO in the 11n physical layer. It also explores the reuse of 11a coding and modulation blocks.

plattj
Download Presentation

Partial Proposal: 11n Physical Layer

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Partial Proposal:11n Physical Layer Michiharu Nakamura and Wladimir Bocquet Fujitsu Laboratories Limited Fujitsu Laboratories Ltd.

  2. Summary • VISA based MIMO processing • PLCP frame structure • 2 and 4 Tx antenna MIMO • Keep .11a Coding and Modulation • Reuse .11a blocks (FFT, coding, Puncturing, Interleave) Fujitsu Laboratories Ltd.

  3. Supported modes • # of Rx antenna > # of Tx antenna Fujitsu Laboratories Ltd.

  4. Signal (a) (a) Power-Minimizing (b) • RLS or LMS with zero reference • Does not require • regeneration of the reference • nor synchronization Zero-Amplitude Subcarrier VISA Principle • Basic idea VISA: VIrtual Subcarrier Assignment Fujitsu Laboratories Ltd.

  5. Signal (a) FFT Signal (b) VISA Weight Calculation Weights to suppress signal (b) on this subcarrier w w w S Pre-FFT VISA • General principle The weights is not applicable to whole band Because the channel is frequency dependent (11-03/940r4) Fujitsu Laboratories Ltd.

  6. Signal (a) FFT FFT FFT Signal (b) VISA Weight Calculation w w w S Post-FFT VISA • General principle Perform Null Steering processing through all the subcarriers Fujitsu Laboratories Ltd.

  7. 2nd LP 2nd LP 2nd LP 1st SP 1st LP SIGNAL 2nd SP Ant 1 2nd SP 2nd LP 2nd LP 2nd LP Ant 2 Ant 3 2nd SP 2nd LP 2nd LP 2nd LP Ant 4 2nd SP 2nd LP 2nd LP 2nd LP Proposed Frame Format • 1st SP and 1st LP: Same as .11a SP and LP • SIGNAL : Same as .11a except for RATE field • 2nd SP and 2nd LP (ANT 1): Same as .11a • 2nd SP and 2nd LP (ANT 2,3,4) : Phase rotation of ANT1 Fujitsu Laboratories Ltd.

  8. RATE Field • IEEE 802.11a/g based modes Fujitsu Laboratories Ltd.

  9. RATE Field (cont’d) • MIMO-OFDM modes Fujitsu Laboratories Ltd.

  10. 2nd LP 2nd LP 2nd LP 1st SP 1st LP SIGNAL 2nd SP Ant 1 2nd SP 2nd LP 2nd LP 2nd LP Ant 2 Ant 3 2nd SP 2nd LP 2nd LP 2nd LP Ant 4 2nd SP 2nd LP 2nd LP 2nd LP Second Short Preamble (2nd SP) • Need to perform AGC for MIMO receiver • One example is given 11-04/087r0 • Codeword representation: 0 means the same polarity, 1 means the opposite polarity. Fujitsu Laboratories Ltd.

  11. 2nd LP 2nd LP 2nd LP 1st SP 1st LP SIGNAL 2nd SP Ant 1 2nd SP 2nd LP 2nd LP 2nd LP Ant 2 Ant 3 2nd SP 2nd LP 2nd LP 2nd LP Ant 4 2nd SP 2nd LP 2nd LP 2nd LP Second Long Preamble (2nd LP) • Antenna 1: same as .11a LP • Antenna 2: based on LP(Ant1) • Antenna 3: based on LP(Ant1) • Antenna 4: based on LP(Ant1) • Yet to find good LP configuration Fujitsu Laboratories Ltd.

  12. 11a coding block DATA ANT1 PSDU S/P DATA ANT2 11a coding block DATA ANT3 11a coding block Channel Coding and Interleaving • Keep as the Same as 11a/g coding block • SERVICE, TAIL, PAD • Scrambling, Conv. Code, Interleave • Per antenna processing / No spatial coding Fujitsu Laboratories Ltd.

  13. PMD function (Modulation) • Identical to that of .11a Fujitsu Laboratories Ltd.

  14. Simulation Setup Fujitsu Laboratories Ltd.

  15. Simulation Results Tx=2, Rx=4 with frequency domain visa processing Fujitsu Laboratories Ltd.

  16. MAC Layer Support • Supported Rates element • Extended Supported Rates element • Rates in 500kbps unit • Msb(bit7) to indicate BSSBasicRateSet • 63.5Mbps is the maximum specifiable in current .11a/g • No designation of Antenna modes To use pre-defined table for .11n use Fujitsu Laboratories Ltd.

  17. MAC Layer Support Example of the definition of the information octet of Supported Rates element Fujitsu Laboratories Ltd.

  18. Thank you! • For your attention. Fujitsu Laboratories Ltd.

More Related