1 / 47

ANMOL GARG (Lecturer) Department Of Architectural Assistantship

ANMOL GARG (Lecturer) Department Of Architectural Assistantship Govt. Polytechnic College, Bathinda 9914410599. WALL PANELLING / WOODEN LAMINATION.

prue
Download Presentation

ANMOL GARG (Lecturer) Department Of Architectural Assistantship

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ANMOL GARG (Lecturer) Department Of Architectural Assistantship Govt. Polytechnic College, Bathinda 9914410599

  2. WALL PANELLING / WOODEN LAMINATION The most common use of wall panelling is for lamination of wood on a wall and for covering of large areas as partitions, because the sheets generally come in large sizes and are extremely light and easy to work with.  While wall panels are usually 4×8 foot in size used as a pre-fabricated wall (wood or calcined gypsum & glass fiber). Some of the panellingscome in four different types: 1.  Tongue and Groove 2.  Overlap 3.  Shiplap Edges 4.  Plank Paneling

  3. The type of panelling depends on what you are using them for and what overall look you want to reach, more on which is best for your type of installation

  4. Tongue and grove is the most popular because it is easy to install and transport.Shiplap joints paneling & plank paneling is composed of a series of planks that line the wall from floor to ceiling. You can choose planks that run vertically or horizontally, though a vertical application is most common. The width of the planks varies, so you can choose the size that best fits the scale of your room. Shiplap joints paneling are formed by cutting identical rebates into opposite faces of adjoining boards. This produces a joint where the rebates overlap, preventing gaps between the boards from being visible.

  5. WALL PANEL OR PANEL WALL

  6. Wood panel wall

  7. Rapid wall panel made up of calcined gypsum, glass fibers and chemicals (an alternative to cement-conc. and brick block)

  8. THANK YOU! ANMOL GARG LECTURER, ARCH. ASSTT. G.P.C., BATHINDA 9914410599 garganmol2@rediffmail.com

More Related