1 / 11

Fibre Channel Over MPLS

Fibre Channel Over MPLS. IETF/T.11 interworking draft-ietf-pwe3-fc-encap-02.txt Tuesday, November 7th, 2006 Moran Roth – Corrigent Ronen Solomon – Corrigent Munefumi Tsurusawa – KDDI LABs. Topics. New draft draft-ietf-pwe3-fc-encap- 02 .txt Reliable congestion control

rafal
Download Presentation

Fibre Channel Over MPLS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Fibre Channel Over MPLS IETF/T.11 interworking draft-ietf-pwe3-fc-encap-02.txt Tuesday, November 7th, 2006 Moran Roth – Corrigent Ronen Solomon – Corrigent Munefumi Tsurusawa – KDDI LABs

  2. Topics • New draft draft-ietf-pwe3-fc-encap-02.txt • Reliable congestion control • Encapsulation format • Signaling of FC PW

  3. FC PW congestion control - Rate control • Based on TFRC (RFC 3448) • CIR and EIR are configured per FC service and FCoMPLS frames are marked accordingly. • Throughout [Bytes/Sec] – actual sending rate is a function of loss event rate and round trip time (RTT). • Loss event – one or more frames dropped within a single LAPB window

  4. FC PW congestion control - Selective retransmission • Based on LAPB (FC-BB-3 standard) • Reliable protocol • Sequencing and re-sequencing mechanism • Acknowledgments - to the sender • Frame loss retransmission

  5. FC PW congestion control - Selective retransmission (cont.) • LAPB message type • I-frame (information frame). • Carries the actual FC information ( data and control) • Includes N(S) and N(R) counters for sequencing and acknowledgment . • S-frame (supervisory frame). • RR ( Receiver Ready) – includes the N(R) counter to acknowledge sender frames. • RNR ( Receiver Not Ready) – includes the N(R) counter to acknowledge sender frames and stop the transmitter. • SREJ (Selective Reject) – indicates sequence numbers of dropped frames to feed the transmitter. • Recommended to send S-frames as high-priority (EF).

  6. FC PW congestion control - Selective retransmission (cont.) • Retransmission protocol mechanism parameters • T1-Poll Timeout • T2 -Response Timeout • K – window size • N2 - Poll Retries • Protocol mechanisms ‘Poll’ and ‘final’ indication bits

  7. L2 header MPLS label PW label FC PW Control word (mandatory} LAPB header FC frame FC frame L2 CRC FC PW encapsulation

  8. FC PW control word • Control word is REQUIRED • A – address bit part of the LAPB protocol indication • FRG – fragmentation is not supported • Length – short frame indication used (minimum 40bytes FC frame) • Sequence number – not used ( LAPB sequencing)

  9. FC PW LAPB header

  10. Signaling of FC PW • PW type in FEC = FcPort • Control word is REQUIRED - C-bit in FEC must be set. • Interface parameters • Four new Sub TLV – TBA • Length of each 4 bytes • Type = T1 , T2 ,N2 , K • Both PE’s should agree on these value for succesful PW setup.

  11. Summary • Assign new PW Type “Fibre Channel port mode” • Assign parameter ID for interface parameters SUB TLV • Draft-02 is ready for cross area review ?

More Related