1 / 20

“HVDC TRANSMISSION” NIST, Berhampur

“HVDC TRANSMISSION” NIST, Berhampur . Under the guidance of :. Mr. Gayadhar Panda Technical Seminar Advisor. INTRODUCTION. Now a days large blocks of power are needed to be transmitted.

rafi
Download Presentation

“HVDC TRANSMISSION” NIST, Berhampur

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. “HVDC TRANSMISSION” NIST, Berhampur Under the guidance of : Mr. Gayadhar Panda Technical Seminar Advisor

  2. INTRODUCTION • Now a days large blocks of power are needed to be transmitted. • There arises some technical problems of transmitting power to such a long distance using ac. • In the view of the draw backs of ac the HVDC transmission has come into picture.

  3. The first dc link was set up in 1954 in between Swedish main land and the island of Gotland. • The use of an HVDC link in an ac system requires converter stations at each end of the line.

  4. ADVANTAGES Advantages of dc transmission Technical Advantages Economic Advantages

  5. TechnicalAdvantages Reactive power requirement System stability Short Circuit Current Independent Control of ac system Fast change of energy flow Lesser Corona Loss and Radio interference Greater Reliability.

  6. No limits in transmitted distance • Direction of power flow can be changed very quickly

  7. Economic advantages • DC lines and cables are cheaper than ac lines or cables. • The towers of the dc lines are narrower, simpler and cheaper compared to the towers of the ac lines. • Line losses in a dc line are lower than the losses in an ac lines.

  8. Comparison between the prices of AC & DCTransmission

  9. Types of DC links Monopolar Homopolar Bipolar

  10. Monopolar link

  11. Bipolar Link

  12. Two terminal DC link point to point transmission. Back to Back DC link DC line in Parallel with AC link. Multi-Terminal DC link. Incorporating HVDC into AC systems

  13. Thyristor valves Converter Transformer DC Reactor Harmonics Filtering Equipment Control Equipment Reactive power compensation CONVERTER STATION EQUIPMENT

  14. Most dc transmission lines use ground return for reasons of economy and reliability Ground return are used by the monopolar and the bipolar link for carrying the return current. The ground path has a low resistance and, therefore low power loss as compared to a metallic conductor path provided the ground electrodes are properly designed. The resistance of the ground path is independent of the depth of the line. GROUND RETURN

  15. The Design of grounding electrodes for low cost of installation and maintenance Location and screening of electrodes so that ground currents cause negligible electrolytic corrosion of buried and immersed metallic structures. PROBLEMS

  16. HVDC system requires a properly designed earth electrode at each station. The electrode is situated at a safe distance (5 to 30 km) from the station. The earth electrode at one of the station acts as a anode and at the other end acts as a cathode. EARTH ELECTRODE

  17. GTO’s have come into use. Use of active ac and dc filters. Advanced fully digital control systems using optical fibers. RECENT ADVANCES

  18. Recent studies indicate that HVDC systems are very reliable. The data collected from 31 utilities says that forced unavailability of energy due to the converter station is 1.62% The scheduled unavailability of energy is about 5.39%. CONCLUSION

  19. Thank you!

More Related