1 / 15

Timber Products and Furniture Technologies (HSC)

Timber Products and Furniture Technologies (HSC) . Construction techniques & Other construction techniques. Sawing. Tenon saw, Dovetail saw, Japanese (pull) saw. Fine handcut Joinery. Eg Handcut dovetail drawers .

rasha
Download Presentation

Timber Products and Furniture Technologies (HSC)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Timber Products and Furniture Technologies (HSC) Construction techniques & Other construction techniques

  2. Sawing • Tenon saw, Dovetail saw, Japanese (pull) saw. Fine handcut Joinery. EgHandcut dovetail drawers. • Bandsaws and jigsaws. For curved cuts or inside cuts, not achievable with circular saw blade. • Table saw, or Sliding compound miter saw. Cuts large panels accuratly and at exact angles. Bevel angle easily set. Trenching for housing joints also very easy.

  3. Drilling • Pilot holes. Countersunk holes. • Dowels and Knock down fittings. • Housing for expanding kitchen hinges. • Holesaw, forstner bit, spade bit, twist bit

  4. Edge treatments • Solid edging • Iron on strip – veneer • Edge-banding machines – veneer or PVC strip

  5. Nailing and screwing • Dovetail nailing • Manual or automated. • Gangnails • Nail guns • Steel selection based on purpose and environment. Eg Stainless Steel screws used for exterior decking screws.

  6. Sanding • Low grade to higher grades, ie 60 to 180 • Shaping. Disc, Belt or spindle (Bobbin) sander.

  7. Turning • Spindle turning • Face plate turning • Off centre turning

  8. Carving

  9. Inlaying

  10. Marquetry

  11. Veneering

  12. Parquetry and Intarsia

  13. Laminating

  14. Bending

  15. Routing

More Related