1 / 22

The CMS Silicon Strip Tracker

The CMS Silicon Strip Tracker. Carlo Civinini INFN-Firenze On behalf of the CMS Tracker Collaboration Sixth International "Hiroshima" Symposium on the Development and Application of Semiconductor Tracking Detectors Carmel Mission Inn, California September 11-15, 2006. Pixel Detector

rea
Download Presentation

The CMS Silicon Strip Tracker

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. The CMS Silicon Strip Tracker Carlo Civinini INFN-Firenze On behalf of the CMS Tracker Collaboration Sixth International "Hiroshima" Symposium on the Development and Application ofSemiconductor Tracking Detectors Carmel Mission Inn, California September 11-15, 2006

  2. Pixel Detector Inner Barrel (TIB) Inner Disks (TID) Outer Barrel (TOB) End Caps (TEC) The CMS Silicon Tracker 1.2 m 2.7 m • 4 layers in TIB • 6 disks in TID • 6 layers in TOB • 18 disks in TEC S. Mersi

  3. Front-End Hybrid APV and control chips Kapton tails Pitch Adapter Kapton Bias Circuit Carbon Fiber/Graphite Frame Silicon Sensors Silicon Strip Modules • TIB Module 29 different Module Flavours All single sided sensors  double sided detectors are realized gluing back to back two single sided modules Carlo Civinini INFN-Firenze STD06

  4. Sensors • p on n • 6” wafers • Inner region: low resistivity 1.5-3.5 kWcm, thin 320 mm • Outer region: higher resistivity 3.5-7.5 kWcm, thick 500 mm • Polysilicon resistor Biasing • AC-coupled Al readout strips • <100> Si orientation • Metal overhang on implant strips • Single sided 6.136 Thin wafers  6.136 Thin detectors (1 sensor) 18.192 Thick wafers  9.096 Thick detectors (2 sensors) More than 200 m2 of Silicon Surface 16 Sensor Designs This room is 180 m2 Carlo Civinini INFN-Firenze STD06

  5. Front-end Electronics 12 hybrid designs 9.648.128 Strips  electronics channels 75.376 APV chips 26.000.000 Bonds 37 000 analog optical links 3000 km optical fibres APV25 PLL MUX Kapton Multilayer Hybrid circuit DCU Carlo Civinini INFN-Firenze STD06

  6. Front-end Electronics • APV25 • Radiation tolerant 0.25 mm CMOS technology • Charge sensitive amplifier with t=50 ns, CR-RC shaper, 192 cell pipeline (4.8 ms deep) per channel • 128 channels multiplexed to 1 analog output • Operation modes: Peak mode (1 sample, t=50 ns); Deconvolution mode (weighted sum of 3 samples, t=25 ns)  High Luminosity • MUX • 2 APV25 chips outputs onto a single differential line • PLL • Decodes clock & trigger signals + delay adjusts • DCU • Slow control data 12 bit ADC (onboard temperatures, leakage current, low voltages) • AOH • Analog opto-hybrid, converts the front-end analog output current to laser light • All functional parameters of these devices can be down/uploaded by mean of I2C bus Carlo Civinini INFN-Firenze STD06

  7. Module Test • The 15232 (+spares) produced modules have been tested to spot possible problems and each strip has been characterized in term of noise, short, open, pinhole etc… • Information about module quality has been stored in a production database • A large fraction of production has been also thermally stressed before integration on the mechanical structures Carlo Civinini INFN-Firenze STD06

  8. Module Test opens noisy C. Marchettini TOB noise distribution for 4-chip and 6-chip modules 400V bias (30% production) Carlo Civinini INFN-Firenze STD06

  9. Module Production Summary M. Krammer Percentage of bad strips on good modules at level of 0.05% - 0.1% * Sept. 4st 2006 (Includes also module repair) Carlo Civinini INFN-Firenze STD06

  10. TIB Integration … how to assemble a piece of Tracker (16 half shells) Carlo Civinini INFN-Firenze STD06

  11. TIB Integration • Mechanical structure (with cooling pipes and precision ledges) • Mount Analog OptoHybrids and Mother Cables • Modules installation • Tests Carlo Civinini INFN-Firenze STD06

  12. Mechanical Structure Temporary fibre Holders Carbon fibre Structural part PT1000 Temperature Probes Cooling pipes Cooling precision Ledges Plus Minus Half shell of half barrel TIB+ or TIB- Depending on the side of the interaction point Carlo Civinini INFN-Firenze STD06

  13. AOH and MC Mounting Mother Cable: Kapton circuit which provides Modules with power, clock, trigger and I2C data 2 meters long pigtail optical fibres Analog Optical Hybrid Analog electrical signals from the module Carlo Civinini INFN-Firenze STD06

  14. Modules • Each module has been mounted by hand on the mechanical structure • Double sided modules, because of their complexity, need a simple mechanical tool to guide the operator’s hand • The precision is anyway defined by the mechanics, no loss of precision or reproducibility in this operation • Very rare accidents because of handling… Precision Insert Precision Insert Carlo Civinini INFN-Firenze STD06

  15. Tests • After each single module has been mounted a fast connectivity test is done (I2C bus scan, module identity check) • When a string of modules (3) is mounted a deep test is performed: readout timing and optoelectronics optimization then pedestals and noise @ 400V bias Carlo Civinini INFN-Firenze STD06

  16. Cumulative noise Layer 4 Backward up noise Distribution Deconvolution 400V bias 2.1 is the cut used During module production Test to flag a noisy strip Opens (0.03%) ADC Counts C. Genta Carlo Civinini INFN-Firenze STD06

  17. Full of modules… Carlo Civinini INFN-Firenze STD06

  18. Burn in • All TIB half shells and TID disks were checked for possible weak components fail and for temperatures and noise behaviour • A structure is fully powered and readout during this test. • Runs are taken both at room temperature and at cold (C6F14 @ -25oC and sensors @ -15oC), peak and deconvolution mode • Same sequence as integration: timing and optogain optimization then pedestals and noise run Carlo Civinini INFN-Firenze STD06

  19. Burn-in Noise Noise distribution at Burn-in of Layer4 backward up Deconvolution 400V Bias A. Venturi M. Vos ADC counts Carlo Civinini INFN-Firenze STD06

  20. Building the TIB+ The TIB half shells are coupled together and then inserted one into the other (4,3,2,1 sequence) to form the barrel T. Lomtadze & A. Basti Carlo Civinini INFN-Firenze STD06

  21. TIB+ Seen from the interaction point R. Dell’Orso Carlo Civinini INFN-Firenze STD06

  22. Conclusions • The CMS Silicon Strip Tracker Collaboration has finished the components production • O(105) complex objects (modules, electronics boards, mechanical parts, cables, fibres, etc.) tested • The integration phase is now well advanced (an O(105) pieces puzzle) and the different sub-detectors (TIB/TID, TOB, TEC) will be joined together in the coming months • Then commissioning and finally Physics… Carlo Civinini INFN-Firenze STD06

More Related