1 / 32

Unit 1 Part 2: Measurement

Unit 1 Part 2: Measurement. Mr. Gates Chemistry. Measurement. Measurement is a quantitative description of both a number and a unit. Ex. 6 feet and 2 inches. Standards. There needs to be standards in order for units to work. The King’s foot. Accuracy vs. Precision.

remy
Download Presentation

Unit 1 Part 2: Measurement

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Unit 1 Part 2:Measurement Mr. Gates Chemistry

  2. Measurement • Measurement is a quantitative description of both a number and a unit. • Ex. 6 feet and 2 inches

  3. Standards • There needs to be standards in order for units to work. • The King’s foot.

  4. Accuracy vs. Precision • Accuracy describes how close a measurement is to the accepted value • Precision describes how close a measurement is to other measurements taken.

  5. Significant Figures All numbers in a measurement that can be known precisely plus one additional number that is estimated. Digits in a measurement that indicate the precision of an instrument used to take a measurement.

  6. Examples (going for a walk) • 3 miles (3 estimated) • 1.9 miles (9 estimated) • 1.918 miles (8 estimated) • 1.91 miles (1 estimated)

  7. Which Figures are Significant? • All nonzero digits are significant • Ex. 5.3 has two significant figures • Zeroes appearing in front (to the left) of a nonzero digit are NOT significant • Ex. 0.0275 has three significant figures • Zeroes appearing in between two nonzero digits are ALWAYS significant • Ex. 2.054 has four significant figures • Zeroes appearing to the right of a nonzero number and after the decimal place are significant. • Ex. 32.810 has five significant figures • Zeroes to the right of nonzero digits and to the left of a decimal place are ambiguous. • Ex. 300 has ?? … it depends

  8. Ambiguous Numbers??? • 200 miles • 200 miles • 200.0 miles • 200. miles

  9. Practice • How many significant figures are in the following numbers? • .0891 • 109.3 • 6.0 • 0.0005 • 1.089 • 7.0020 • .08340

  10. Rules for Rounding • If the number to the right of the last significant figure is from 0-4, round down. • If the number to the right of the last significant figure is from 5-9, round up. • Examples: 26.819 • rounded to three significant figures is 26.8 • Rounded to four significant figures is 26.82 • Practice: 0.01037 • Rounded to three significant figures? • Rounded to two significant figures?

  11. Practice • Round the number 34.1050 to: • 2 sig figs • 34 • 5 sig figs • 34.105 • 4 sig figs • 34.11 • 3 sig figs • 34.1 • Round the number 0.0539801 to: • 2 sig figs • 0.054 • 5 sig figs • 0.053980 • 4 sig figs • 0.05398 • 3 sig figs • 0.0540

  12. Exceptions that Make the Rule • There is an UNLIMITED amount of sig figs in two circumstances. • Counted numbers • 23 students in class (can’t have a fraction of a person) • Exact/defined quantities • 12 inches in a foot • Like 12.00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 000000000000000000000000000000000000000000000000000… (catching my breath)…000000000000000000000000000000000 0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000…. To infinity and beyond zeroes

  13. Sig Figs w/ Calculations Addition or Subtraction The answer can have no more decimal places than the number with the least decimal places in the calculation. Ex. 4.56-1.2= 3.36, but with proper sig figs the answer is… =3.4 Ex. 9.64+1.751= 11.391, but with proper sig figs the answer is… = 11.39

  14. Sig Figs w/ Calculations • Multiplication and Division • The answer can have no more sig figs than the number with the least amount of sig figs in the calculation. Ex. 1.24 x 2.6 = 3.224, but with proper sig figs the answer is... = 3.2 Ex. 5.11 x 6.551 = 33.47561, but with proper sig figs the answer is… = 33.5

  15. Scientific Notation • Scientific notation is a number written as the product of two numbers. • Follows the following format: M x 10N • M is some number between 1 and 10 • N is the amount of times the decimal places had to be moved. • N ≠ decimals

  16. Putting #’s in Sci. Notation • Every time the decimal place is moved the exponent must move too. M x 10N If the decimal moves  then the exponent goes down If the decimal moves  then the exponent goes up

  17. In and Out Put into scientific notation: 0.0000361 9,840,000,000 Take out of scientific notation: 3.65 x 107 2.49 x 10-4

  18. Sig Figs and Sci. Notation • All of the numbers in proper scientific notation are significant… No ambiguous numbers!!! 2000 is 2.00 x 103 with three sig figs.

  19. Addition/Subtraction in Sci. Notation • Adding and Subtracting: • Exponents must be the same!!! • EX: 5.1 x 105 + 6.07 x 105 11.17 x 105 (not correct sig figs) 11.2 x 105 (not correct sci not.) 1.12 x 106

  20. Multiplying/Dividing in Sci. Notation • Multiplying and Dividing: • EX: 7.2 x 102 x 4.2 x 103 30.24 x 105 (not correct sig figs) 30. x 105 (not correct sci. not.) 3.0 x 106

  21. International System of Measurement • Internationally used system of measurement known as the “Metric System”

  22. Benefits of Using the Metric System • Scientist all over the world use this system. • They can share and understand each other’s work. • Based on multiples of ten. Makes for easier conversions.

  23. SI Base units

  24. Volume • The amount of space an object takes up. • Base unit is cm3

  25. Mass • The amount of matter in an object. • Base unit is the kg because the gram is too small.

  26. Weight • The pull gravity has on the mass of an object.

  27. Fluid Volume • When dealing with a fluid (gas or liquid) the most commonly used unit is the liter (L) • 1ml = 1cm3

  28. SI Prefixes

  29. Dimensional Analysis • Method of converting from one unit to another of equal value using conversion factors.

  30. Conversion Factors • These are fractions that are equal to one because the top is equal to the bottom despite the differing units. • Multiplying anything by one will not change the number. • Conversion factors spawn from two numbers that are equal to each other. • Ex. 100cm = 1m • or

  31. Using Dimensional Analysis • How many mg are in 1.32kg? • How many seconds are in your lifetime? • How many cases of pop will you drink in your lifetime?

  32. Converting Complex Units • What is 19 in2 in ft2?

More Related