RF based robot

1. RF BASED ROBOT

2. ThisRF based robot is an addressable wireless robot. • The communication between the transmitter and receiver can only be done when the 8 Bit address matches. • The Robot can be used with combination of a simple microcontroller based embedded system to generate 24number of inputs for different wireless purposes. • The receiver then receives the Encoded Signal. • The receiver circuit consists of a receiver which can be RF receiver. • The received signal is decoded and address is matched to the address of receiver and data is given out at the Dout pins.

3. RF BASED ROBOT KIT CONTENT • 1X 4 Ch. RF based  Wireless Transmitter Board. • 1X 4 Ch. RF based Wireless Receiver Board • 1X 434 MHz ASK Transceiver Module  • 4X WHITE SMALL TYRE • 4X Center Shaft Metal Gear • 1X Jumbo Chasis • 4X 40 mm Stud • 1X Screw Driver Pack

4. RF BASED CONTROL CIRCUIT • RF based Wireless kit V1.0 works on RF mode. • The control circuit used for the board is versatile enough to incorporate different types of Input like RF Encoded Signals and DTMF Signal via Stereo pin. • The control circuit consists of a Transmitter module and Receiver module. • The transmitter module Transmits addressable Encoded RF signal to the receiver. • At the transmitter end the 4 bit of data is converted or encoded into serial data that contains data and address bits. • Then the encoded serial data is transmitted using RF.

5. CONTACT US C4/100, C-Block, Above IOB Bank, Sec-31, Noida-201301(UP) India https://www.robomart.com/information/contact