1 / 34

Thinnet (10Base2)

Thinnet (10Base2). Characteristics (cont.): Size and scalability Allows a maximum of 185 m per network segment (see Figure 4-20) Noise immunity More resistant than twisted-pair wiring Less resistant Thicknet. Figure 4-19: Thinnet BNC connectors. Thinnet (10Base2). Signal bounce

romeo
Download Presentation

Thinnet (10Base2)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Thinnet (10Base2) • Characteristics (cont.): • Size and scalability • Allows a maximum of 185 m per network segment (see Figure 4-20) • Noise immunity • More resistant than twisted-pair wiring • Less resistant Thicknet Figure 4-19: Thinnet BNC connectors

  2. Thinnet (10Base2) • Signal bounce • Caused by improper termination on a bus network • Travels endlessly between two ends of network • Prevents new signals from getting through Figure 4-20: A 10Base2 Ethernet network

  3. Twisted-Pair (TP) Cable • Color-coded pairs of insulated copper wires twisted around each other and encased in plastic coating • Twists in wire help reduce effects ofcrosstalk • Number of twists per meter or foot known as twist ratio • Alien Crosstalk • When signals from adjacent cables interfere with another cable’s transmission Figure 21: Twisted-pair cable

  4. Shielded Twisted-Pair (STP) • STP cable consists of twisted wire pairs that are individually insulated and surrounded by shielding made of metallic substance Figure 4-22: STP cable

  5. Unshielded Twisted-Pair • Consists of one or more insulated wire pairs encased in a plastic sheath • Does not contain additional shielding Figure 4-23: UTP cable

  6. Unshielded Twisted-Pair • To manage network cabling, it is necessary to be familiar with standards used on modern networks, particularly Category 3 (CAT3) and Category 5 (CAT5) Figure 4-24: A CAT5 UTP cable

  7. Unshielded Twisted-Pair • CAT1 – 2 wire pairs; suitable for voice only • CAT2 – 4 wire pairs; up to 4 Mbps throughput • CAT3 – 4 wire pairs; up to 10 Mbps and 16 Mhz signal • CAT4 – 4 wire pairs; up to 10 Mbps • CAT5 – 4 wire pairs; up to 100 Mbps and 100 Mhz signal • CAT5e – up to 200 Mhz signal • CAT6 – additional foil insulation; 6x throughput than CAT5 • CAT7 – unfinished standard – up to 1Ghz

  8. 10BaseT • Popular Ethernet networking standard that replaced 10Base2 and 10Base5 technologies • “T” for twisted pair Figure 4-25: A 10BaseT Ethernet network

  9. 10BaseT • Enterprise-wide network • Spans entire organization • Often services needs of many diverse users Figure 4-26: Interconnected 10BaseT segments

  10. 100BaseT • Enables LANs to run at 100-Mbps data transfer rate • Also known as Fast Ethernet • Two 100BaseT specifications have competed for popularity as organizations move to 100-Mbps technology: • 100BaseTX • 100BaseT4 (can use CAT3 cabling)

  11. 100BaseVG • Cousin of Ethernet 100 Mbps technologies • VG stands for voice grade • Also called 100VG-AnyLAN • Originally developed by Hewlett-Packard and AT&T • Now governed by IEEE standard 802.12 • Requires more sophisticated NICs and can reduce network performance

  12. Comparing STP and UTP • Throughput • Both can transmit up to 100 Mbps • Cost • Typically, STP is more expensive • Connector • Both use RJ-45 connectors and data jacks • Noise immunity • STP is more noise-resistant • Size and scalability • Maximum segment length for both is 100 meters

  13. Fiber-Optic Cable • Contains one or several glass fibers at its core • Surrounding the fibers is a layer of glass called cladding Figure 4-28: A fiber-optic cable

  14. Fiber-Optic Cable • Single-mode fiber • Carries light pulses along single path • Multimode fiber • Many pulses of light generated by LED travel at different angles Figure 4-29: Single-mode and multimode fiber-optic cables

  15. Fiber-Optic Cable • Throughput • Reliable in transmitting up to 1 gigabit per second • Cost • Most expensive type of cable • Connector • You can use any of 10 different types of connectors

  16. Fiber-Optic Cable • Two popular connectors used with fiber-optic cable: • ST connectors • SC connectors Figure 4-30: ST and SC fiber connectors

  17. Fiber-Optic Cable • Noise immunity • Unaffected by either EMI or RFI • Size and scalability • Network segments made from fiber can span 100 meters • Signals transmitted over fiber can experience optical loss

  18. 10BaseF and 100BaseFX • 10BaseF • Physical layer standard for networks specifying baseband transmission, multimode fiber cabling, and 10-Mbps throughput • 100BaseFX • Physical layer standard for networks specifying baseband transmission, multimode fiber cabling, and 100-Mbps throughput

  19. Physical Layer Networking Standards Table 4-3: Physical layer networking standards

  20. Cable Design and Management • 1991 – TIA/EIA released its joint 568 Commercial Building Wiring Standard • TIA – Telecommunication Industry Assoc. • www.tiaonline.org • EIA – Electronic Industries Assoc. • www.eia.org • T568A • T568B

  21. Cable Design and Management • Cable plant • Hardware comprising enterprise-wide cabling system • Structured cabling • Method for uniform, enterprise-wide, multivendor cabling systems Figure 4-31: TIA/EIA structured cabling subsystems

  22. Cable Design and Management • Entrance facilities • Backbone wiring • Backbone cabling that provides vertical connections between floors of a building are called risers Table 4-4: TIA/EIA specifications for backbone cabling

  23. Cable Design and Management • Equipment room • Telecommunication closet • Punch-down block is a panel of data receptors • Patch panel is a wall-mounted panel of data receptors Figure 4-32: Patch panel (left) and punch-down block (right)

  24. Cable Design and Management • Horizontal wiring • Max distance is 100m Figure 4-33: Horizontal wiring

  25. Cable Design and Management • Work area • Patch cable is a relatively short section of twisted-pair cabling with connectors on both ends that connect network devices to data outlets Figure 4-34: Standard TIA/EIA wall jack

  26. Cable Design and Management Figure 4-35: A structured cabling hierarchy

  27. Installing Cable Figure 4-36: A typical UTP cabling installation

  28. Installing Cable * T568A Standard Table 4-5: Pin numbers and color codes for an RJ-45 connector

  29. Installing Cable • Straight-through cable • Terminations at both ends are identical • Crossover cable • Terminations locations of transmit and receiver wires on one end of cable are reversed Figure 4-37: RJ-45 terminations on a crossover

  30. Installing Cable • Do not untwist twisted-pair cables more than one-half inch before inserting them • Do not strip off more than one inch of insulation from copper wire in twisted-pair cables • Watch bend radius limitations for cable being installed • Test each segment of cabling with cable tester • Use only cable ties to cinch groups of cable together

  31. Installing Cable • Avoid laying cable across floor where it may sustain damage • Install cable at least three feet away from fluorescent lights or other sources of EMI • Always leave slack in cable runs • If running cable in plenum, area above ceiling tile or below subflooring, make sure cable sheath is plenum-rated • Pay attention to grounding requirements

  32. Atmospheric Transmission Media • Infrared transmission • Infrared networks use infrared light signals to transmit data through space • Direct infrared transmission depends on transmitter and receiver remaining within line of sight • In indirect infrared transmission, signals can bounce off of walls, ceilings, and any other objects in their path

  33. Atmospheric Transmission Media • RF transmission • Radio frequency (RF) transmission relies on signals broadcast over specific frequencies • Very susceptible to interference • Two most common RF technologies: • Narrowband • Concentrates RF energy at a single frequency • Spread spectrum • Distributed over several frequencies simultaneously

  34. Choosing the Right Transmission Media • Areas of high EMI or RFI • Corners and small spaces • Distance • Security • Existing infrastructure • Growth

More Related