1 / 16

Instrumentation of Breaking Glass

Instrumentation of Breaking Glass. Strobe 6: Friday 10am–1pm strobe6@mit.edu Adam Seering aseering@mit.edu Aubrey Tatarowicz altat@mit.edu Daniel Hernandez djh@mit.edu John Hawkinson jhawk@mit.edu. How does glass break? — What ways can we instrument the cracking process?.

roy
Download Presentation

Instrumentation of Breaking Glass

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Instrumentation of Breaking Glass Strobe 6: Friday 10am–1pmstrobe6@mit.edu Adam Seering aseering@mit.edu Aubrey Tatarowicz altat@mit.edu Daniel Hernandez djh@mit.edu John Hawkinson jhawk@mit.edu

  2. How does glass break?— What ways can we instrument the cracking process? Concept - What we did - Results - Feasible? - Timeline

  3. Making it break! Concept - What we did - Results - Feasible? - Timeline • We tried several ways: • Heat on glass + cold water (for thermal shock) • Impact from a falling weight • BB gun • What can we measure and quantify?

  4. What we want to measure (goals) Concept - What we did - Results - Feasible? - Timeline • Is there a consistent shape to the breaking? • What is the rate and pattern of deformation and breakage? • How does glass breaking process depend on glass thickness? • Comparison of different measurement techniques • Electrically conductive paint versus video • Look at heat distribution w/ Schlieren imaging • Effects of different-shaped impact objects (screwdriver, BB, etc.) • What are the effects of temperature?

  5. Setup photo Concept - What we did - Results - Feasible? - Timeline

  6. Investigation of breaking by thermal shock Concept - What we did - Results - Feasible? - Timeline • 1mm thick microscope slides,clamped to lab stand • ~200°C soldering iron:did not break on instant contact • Nor did glass break on sustained contact • 380°C from heat gun • Still glass slide does not break

  7. Thermal Shock Works! Concept - What we did - Results - Feasible? - Timeline • 380°C from heat gun • Release drop of water → Whether the slide breaks depends on height of water release

  8. Investigation of glass breaking by impact Concept - What we did - Results - Feasible? - Timeline • Thicker sheets of glass —3/32" (2.4 mm) • Cut sheets to ~2"x8" • Taped across apple boxes • Dropped mass (screwdriver) from different heights

  9. Results We can measure crack motion in time Concept - What we did - Results - Feasible? - Timeline 13 μs per step

  10. ResultsWe observe flexing of glass, but want a better visuals and instrumentation. Ideas: try projecting a grid onto glass, or view glass edge-on Concept - What we did - Results - Feasible? - Timeline 47,000fps; 21μs Frame 2 Frame 1 21μs

  11. Lighting to get good results Concept - What we did - Results - Feasible? - Timeline • Top lighting produces a lot of glare • Back lighting and side lighting work well in order to see cracking, these were used in the images in the previous slides

  12. YES! It is feasible Concept - What we did - Results - Feasible, YES! - Timeline • From the trials with slides • We can measure the speed of the crack motion • We can break with force and/or thermal shock • However, it might be hard to see deformation on slide since they are so small • From the thick sheets, • We can see glass flexing upon impact of blunt object • The shattering is more defined — will probably yield better results than the slides

  13. Cost is cheap! Concept - What we did - Results - Feasible, YES! - Timeline • One 8"x10" sheet of glass costs $2 • Cut into five 2“ inch slices → $0.40 per slice • Box of slides costs $8 (72 slides) • $0.11 per slide

  14. Future direction Concept - What we did - Results - Feasible, YES! - Timeline • Thicker sheets are more exciting than small slides: need to reproduce thermal shock using sheets. • We want to try different lighting techniques and camera angles since these factors will be key in being able to extract useful data.

  15. Timeline Concept - What we did - Results - Feasible, YES! - Timeline

  16. Instrumentation of Breaking Glass Strobe 6: Friday 10am–1pmstrobe6@mit.edu Adam Seering aseering@mit.edu Aubrey Tatarowicz altat@mit.edu Daniel Hernandez djh@mit.edu John Hawkinson jhawk@mit.edu

More Related