1 / 20

Compressed Gas Cylinder Safety

Compressed Gas Cylinder Safety. INTRODUCTION. Industrial, manufacturing, repair shops, fabrication shops and construction operations require the use of compressed gases for a variety of different operations. INTRODUCTION. Compressed gases present a unique hazard. Gases may be:.

schweizer
Download Presentation

Compressed Gas Cylinder Safety

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Compressed Gas Cylinder Safety

  2. INTRODUCTION Industrial, manufacturing, repair shops, fabrication shops and construction operations require the use of compressed gases for a variety of different operations.

  3. INTRODUCTION Compressed gases present a unique hazard. Gases may be: • Flammable or combustible • Explosive • Corrosive • Poisonous • Inert • or a combination of hazards

  4. INTRODUCTION • Gases may have a flash point lower than room • temperature. • Gases normally have a high diffusion rate. • Higher concentration of the gases can cause • asphyxiation. • The cylinders are heavier than expected. • The cylinders are highly pressurized making • them a potential rocket or bomb.

  5. INTRODUCTION • Care should be taken in: • Handling the compressed gases, • Handling the cylinders, • Handling the regulators or valves, • Handling the hoses used to confine • gases during flow.

  6. IDENTIFICATION The contents of all compressed gas cylinders must be clearly identified on the cylinder. The identification should be stenciled or stamped on the cylinder or contained in a label.

  7. IDENTIFICATION Do not accept any cylinder that does not have its contents identified by name. If the labeling is not clear or the tag is not legible, the cylinder should be marked with a tag stating “contents unknown”. The cylinder should be returned to the supplier.

  8. IDENTIFICATION The color of a cylinder does not indicate the contents of the cylinder. Color coding may not be reliable as colors vary by supplier. Labels on caps should not be used to identify the contents as caps are interchangeable.

  9. IDENTIFICATION Post conspicuous signs in areas where flammable compressed gases are stored. These signs should identify the substances and appropriate precautions (e.g., HYDROGEN - FLAMMABLE GAS - NO SMOKING - NO OPEN FLAMES).

  10. HANDLING & USE Gas cylinders must be secured at all times to prevent tipping.

  11. HANDLING & USE Move leaking cylinders to a safe place if it is safe to do so, and call the supplier as soon as possible. Never attempt to repaira cylinder or valve.

  12. HANDLING & USE Normally, right-handed threads are used for non-fuel gases, while left-handed threads are used for fuel gases. Inspect the threads for damage.

  13. HANDLING & USE Place all cylinders so the valve is accessible at all times. The valve should be closed when the cylinder is no longer in use.

  14. HANDLING & USE • Open valves slowly. • Open oxygen cylinder valves all the way. • Back seat oxygen cylinder valve by opening it • slightly first, until the needle on the high • pressure gauge stops. Then open all the way. • Point the valve away from you and warn • others nearby before opening any valve.

  15. HANDLING & USE Flammable gas cylinders such as hydrogen or acetylene must not be stored close to open flames, where sparks are generated, or near any other source of ignition. Never store acetylene cylinders on their side.

  16. HANDLING & USE Never use an open flame to detect leaks of flammable gases. Store cylinders containing flammable gases in well-ventilated areas.

  17. HANDLING & USE • Oxygen cylinders and flammable gas cylinders should be separated by: • At least 20 feet of open space, or • A fire wall 5 feet high with a fire rating of • ½ hour minimum.

  18. HANDLING & USE Regulators are gas specific and not necessarily interchangeable!

  19. HANDLING & USE • When cylinders are empty: • Valves shall be closed, • The system bled, • The regulator removed, • The valve cap replaced, • The cylinder marked as “empty”, • They cylinder returned to the storage area for • empty cylinders, and • Store empty cylinders apart from full cylinders.

  20. TRANSPORTATION OF CYLINDERS • The cover cap should be screwed on hand tight and remain on until the cylinder is ready for use or in storage. • Cylinders should never be rolled or dragged. • Cylinders should be strapped to a properly designed wheeled cart to ensure stability. • Only one cylinder should be handled at a time.

More Related