1 / 47

Connectors

Connectors. C onnectors are a major cause of equipment failure . Pins are wired incorrectly, bare wires touch and short circuit or connector pins are accidently bent . Failed connectors can mimic system chassis failure. DC Direct Current AC Alternating Current. Alternating Current.

taini
Download Presentation

Connectors

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Connectors Connectors are a major cause of equipment failure. Pins are wired incorrectly, bare wires touch and short circuit or connector pins are accidently bent. Failed connectors can mimic system chassis failure

  2. DC Direct Current AC Alternating Current

  3. Alternating Current

  4. Alternating Current

  5. Alternating Current

  6. Radio Signal or Alternating Current (AC)

  7. Removing pins from connector

  8. Local Companies like Pan Pacific build connectors for Boeing

  9. “Bayonet coupling A quick coupling mechanism for mating a plug onto a Receptacle utilizing three equally spaced pins protruding from the receptacle shell which engage corresponding ramps milled into the coupling nut of the mating plug. Mating and unmating is accomplished by rotating the coupling nut.” Typical connector from your text

  10. Radio Frequency Connectors • BNC Bayonet Neill Concelman (British Navel Connector) • TNC Threaded Neill Concelman connector • Series N Plug (connector) weatherproof, RF connector, with consistent performance through 11 GHz. Primary use is connecting and terminating Coax RG-8, RG- 58, RG-141 and RG- 225 • SMA connectors (Subminiature) Screw type mechanism like F connector, 50 ohm impedance, Electrical performance DC to 17 GHz.

  11. Sockets replaces the historic Male and Female connector RMS company http://rmsconnectors.com/

  12. Connector Catalog with Mil-Spec data http://rmsconnectors.com/pdfs/rms_connectorsGuide.pdf Polarization

  13. D Subminiature. • D Subminiature. • The "D" refers to the shape of the connector, which is wider on one side to prevent the plug from being inserted incorrectly. • The connector is often used in circuits under about 5 amps, such as power, audio, digital signals and ground. • Manufactured in many sizes sizes, with 15-and 25-pin models common in avionics. • The type sold in most electronics stores for PC use are unreliable for aviation use. A good connector will also have a sturdy system for removing strain on the cable.

  14. ARINC ConnectorsWhen old airline aircraft are upgraded with digital avionics (such as the Boeing 747-400) the flight deck becomes a "glass cockpit," meaning EFIS, the electronic flight instrument system. Digital equipment requires ARINC 600 connectors. • 404 • http://www.te.com/catalog/feat/en/c/18538 • 600 – used on new digital equipment • http://www.te.com/catalog/feat/en/c/18598

  15. 600 connectors

  16. ARINC 600 Rack and Panel Connectors 150 connections in one block

  17. Connector tools • A large variety of tools are used for inserting and extracting pins from connectors • A large Aviation industry surrounds the construction of connectors. • Tools like these are replacing the soldered type connectors

  18. Heat Gun A heat gun is essential for heat shrink tubing and solder sleeving.

  19. Heat Gun • Video of Heat Gun http://www.youtube.com/watch?v=NRn9lYKD-Wg • Video of N connector http://www.youtube.com/watch?v=wDP6nFwqAps

  20. Coax Connectors http://www.te.com/catalog/menu/en/26435

  21. Coaxial Cables have the following construction Metallic center conductor Layers of Dielectric or insulating Material A shield Foil Wire mesh A protective jacket

  22. Coaxial or Coax Cable The inner and outer conductors are separated by an insulating layer known as dielectric. Choice of materials and dimensions determines the cable's electrical properties, including attenuation at various frequencies.

  23. TNC next to BNC

  24. Coax

  25. coax

  26. Coax Video of coax

  27. Single shield Coax

  28. 2 Shields for immunity to electrical noise--Ingress This is not Twinax, see below connector

  29. Triaxial cable Twinaxial

  30. Coax Bend Radius

  31. Wiring to hold connectors in place

  32. Lockwire

  33. Applications other than Avionics Safety wire or lockwire is a type of positive locking device that prevents fasteners from loosening due to vibration and other forces. The presence of safety wiring also serves to indicate that the fasteners have been properly tightened.

  34. Safety Wire

  35. Connectors (soldered)

  36. Connectors • “Working with connectors often takes up more of an installation technician's time than any other task” quote from your text. • Light aircraft have connectors in the dozens while large AC have them in the hundreds.

More Related