1 / 23

Design Realization lecture 12

Design Realization lecture 12. John Canny 10/2/03. Last Week*. Introduction to materials: physical properties, density, strength, stiffness, thermal and electrical conduction. Metals: Steel, Aluminum, Brass. Ferromagnetism, solid, flexible and liquid magnets. This time.

tawny
Download Presentation

Design Realization lecture 12

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Design Realization lecture 12 John Canny 10/2/03

  2. Last Week* • Introduction to materials: physical properties, density, strength, stiffness, thermal and electrical conduction. • Metals: Steel, Aluminum, Brass. • Ferromagnetism, solid, flexible and liquid magnets.

  3. This time • One more metals topic: shape memory alloy. • Introduction to plastics.

  4. Shape-Memory Alloy • Two main metal phases are shown below:

  5. Shape-Memory Alloy • In steel, the martensite/austenite transition is influenced by alloying, cold-working etc. • In shape memory allow, the transition is caused by a small change in temperature. • The best-known shape memory allow is Nitinol NiTi (Nickel Titanium).

  6. Shape-Memory Alloy • The austenite is stiffer and has lower volume. • Heating SMA wire causes it to contract with some force. Strains of 3-5% are typical.

  7. Shape-Memory Alloy • Nitinol has the following attributes:

  8. Plastics • Plastics exhibit an incredible variety of properties due to their rich chemical makeup. • They are inexpensive to produce, and easy to mold, cast, or machine. • Their properties can be expanded even further in composites with other materials.

  9. Polymer chemistry • Polymers are chain molecules. They are built up from simple units called monomers. • E.g. polyethylene is built from ethylene units: which are assembled into long chains:

  10. Polymer structure • The polymer chain layout determines a lot of material properties: • Amorphous: • Crystalline:

  11. Cross-linking • Generally, amorphous polymers are weak. • Cross-linking adds strength: vulcanized rubber is polyisoprene with sulphur cross-links:

  12. Branched polymers • Polymer chains can branch: • Or the fibers may aligned parallel, as in fibers and some plastic sheets.

  13. Copolymers • Polymers often have two different monomers along the chain – they are called copolymers. • With three different units, we get a terpolymer. This gives us an enormous design space…

  14. 9 8 7 6 5 4 3 Temperature Glass-rubber-liquid • Amorphous plastics have a complex thermal profile with 3 typical states: Glass phase (hard plastic) Leathery phase Log(stiffness)Pa Rubber phase (elastomer) Liquid

  15. Thermoplastics • Polymers which melt and solidify without chemical change are called thermoplastics. • They support hot-forming methods such as injection-molding and importantly for us, FDM.

  16. Thermoset plastics • Polymers which irreversibly change when heated are called thermosets. • Most often, the change involves cross-linking which strengthens the polymer (setting). • Thermosets will not melt, and have good heat resistance. • They are often made from multi-part compounds and formed before setting (e.g. epoxy resin). • Setting accelerates with heat, or for some polymers with UV light.

  17. Notable plastics - Polyethylene • Probably most common plastic – glad bags and packing material, children’s toys – thermoplastic • Simple formula: • Not quite amorphous! (demo) • Glass transition -130 to -80 C • Melting point 130 C • Tensile yield (strength) 25 MPa • Tensile modulus (stiffness) 1 GPa (soft) • Density 0.95

  18. Notable plastics - Acrylic • Most common optical plastic - refractive index very close to glass (1.5), aka Plexiglas, Lucite • Full name polymethyl methacrylate (PMMA). • Also an important fiber, paint. • Glass transition 110 C • Melting point 130 C • Tensile yield 50 MPa • Tensile modulus 30 GPa • Density 1.15 • Excellent laser cutter material!

  19. Notable plastics – contd. • ABS – popular construction thermoplastic, used in FDM machines. • PVC – plumbing pipes, electrical insulation. • Nylon – most important fiber. • Polyester – 70s disco clothing – plastic bottles. • Polystyrene – computer housings, toys, also made into foam (Styrofoam). • Polycarbonate – strong, refractive index > glass, eyeglass material. A thermoset plastic. • Cellulose – natural wood fiber.

  20. Elastomers • Elastomers are synthetic rubbers E < 1 GPa • Polyurethane – used in pillows and cushions. • Silicones – used for caulking and Space Shuttle heat tiles. Silicones are inorganic with an S-O backbone. • Fluoroelastomers – good electrical insulators.

  21. High performance plastics • PTFE – Polytetrafluoroethylene – aka Teflonlong name, simple structure: • Exceptional resistance to solvents, great lubricant, nothing sticks to it! • The fluorine-carbon bonds are very strong, fluorines protect carbon backbone. • High melting point 330 C • High electrical breakdown – artificial muscle. • Technically a thermoplastic, but hard to process.

  22. High performance plastics • Kevlar is an aramid polymer: • Chains are stiff and straight. • Highly crystalline polymer, difficult to process. • Melting temperature 500 C • Tensile strength 3.6 GPa, about 4x steel!

  23. High performance plastics • Epoxy resin is made from the2-part kits. • It’s the basis of composites like fiberglass, carbon fiber composites etc. • Apart from an excellent glue, it is an important molding compound for rapid prototyping. • Tensile strength 60 MPa • Stiffness 2.6 GPa

More Related