1 / 7

Additional Comment Resolutions Related to RIT Mode

This document provides proposed resolutions for comments related to the RIT mode in the Low Energy subgroup. The proposed resolutions address various comments and include revisions to figures and descriptions.

terryrjohnson
Download Presentation

Additional Comment Resolutions Related to RIT Mode

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Project: IEEE P802.15 Working Group for Wireless Personal Area Networks (WPANs) Submission Title: [Additional comment resolutions related to RIT mode] Date Submitted: [June 1, 2010] Source: [Hiroshi Harada1, Fumihide Kojima1, Ryuhei Funada1, Sum Chin Sean1, Takaaki Hatauchi2, Minoru Tanabe3, Tomonori Sato4, Kentaro Sakamoto5, Aiichiro Kashiwagi6, Takahiro Banno7, Hirohito Nishiyama8] Company [1NICT, 2Fuji Electric, 3Panasonic, 4Toshiba Toko Meter Systems, 5Tokyo Gas, 6Osaka Gas, 7Toho Gas, 8Mitsubishi Electric Corp.] Address [13-4, Hikari-no-oka,Yokosuka-shi, Kanagawa, 239-0847, Japan] Voice:[1+81-46-847-5074] FAX: [1+81-46-847-5440] E-Mail:[f-kojima@nict.go.jp, harada@nict.go.jp ] Re: [TG4e comment resolution] Abstract: [Comment resolutions related to the RIT mode] Notice: This document has been prepared to assist the IEEE P802.15. It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein. Release: The contributor acknowledges and accepts that this contribution becomes the property of IEEE and may be made publicly available by P802.15.

  2. Summary This document describes the proposed resolution on the comments related to RIT mode (sub category of Low Energy subgroup), provided in 15-10-0321-03-004e (LB53 Consolidated Comment Database). The following comments are addressed; CID# 704, 710, 711, 712, 714, 715, 717, 719, 720, 722, 820 and 1576.

  3. Comment with proposed resolution as “Accept” Proposed resolutions to the following comments are “Accept” CID# 704, 710, 711, 712, 714, 717 and 720 These are rather “editorial” and are no additional instructions required Revise as provided in “Proposed Change” CID# 715 Revised Figure (Figure 73.r) is provided in slide 4 (next slide). CID# 722 Revised Figure (Figure 73.r) is provided in slide 5.

  4. Revision of Figure 73.q Resolution to CID #715 Insert description of timer

  5. Revision of Figure 73.r Resolution to CID #722 Insert space between "exchangedata"

  6. CID #719 Comment: “During what period?” Proposed resolution: Accept in Principle Insert the underlined text as follows; "During macRitTxWaitTime period,…". CID #820 Comment: “It is not clear why FCS_ERROR should be propagated to the NHL...” Proposed resolution: Reject. FCS_ERROR is required to notify an erroneous reception to the next higher layer in RIT mode. Behavior afterwards is at the NHL's discretion.

  7. CID #1576 Comment: “don’t have enumeration of "FCS_ERROR" in this draft.” Proposed resolution: Reject It is used by status parameter of MLME-FRAME-ERROR.indication primitive, which is utilized in RIT mode.

More Related