1 / 43

MiRC Cleanroom Operations

MiRC Cleanroom Operations. Microelectronics Research Center Georgia Institute of Technology. Chemical Safety Training. Please. Silence your mobile phones for this lecture Wait until a break before answering calls. Agenda. Terminology Cleanroom hazards Safety Practices

thom
Download Presentation

MiRC Cleanroom Operations

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. MiRC Cleanroom Operations Microelectronics Research CenterGeorgia Institute of Technology Chemical Safety Training

  2. Please • Silence your mobile phones for this lecture • Wait until a break before answering calls

  3. Agenda • Terminology • Cleanroom hazards • Safety Practices • Storage and disposal of chemicals • Accidents and emergencies

  4. I—Terminology • MSDS—Material Safety Data Sheet • A MSDS is a document that describes a chemical’s properties, hazards, and safe use policies • Partial Listing • Chemical Property Terms • Exposure, toxic effects, & exposure levels • Storage & handling • Emergency procedures • Safe disposal & transportation

  5. Sources of Chemical Information • MiRC cleanroom website • http://grover.mirc.gatech.edu/safety/ • Read “How to Translate a MSDS” • Manufacturers/suppliers • Include a MSDS with the first shipment of that chemical

  6. II—Cleanroom Hazards • While working in the cleanroom, you will use various chemicals to process your wafers and the following (potential) hazards • Toxic, flammable, and corrosive gases • Acids and bases • Solvents • Electrical • Sharps—razor blades, broken wafers

  7. Gas hazards (partial listing) • Pyroforic (Silane)—burns in contact with air • Flammable (Hydrogen) • Corrosive (Chlorine) • Asphyxiant (Nitrogen, Argon)—not hazardous as described above; but will not support life • You will not handle these gases (cylinders) in the cleanroom, but you will use them in process tools—etch and deposition systems

  8. Specific Chemical Hazards • Hydrofluoric Acid • Acetone and Flammable Solvents • Chlorinated Solvents

  9. Hydrofluoric Acid (HF) • Highly corrosive, readily penetrates the skin, causes deep tissue layer destruction and destruction of bone, pain may be delayed from 1 to 24 hours, therefore early treatment is very important. Use Calcium Gluconate gel for treatment—tubes are located near each fume hood. Calcium Gluconate is not a burn ointment • Literature indicates that HF exposures of as little as 2% of body area have been fatal.

  10. Acetone and Flammable Solvents • These solvents have a high vapor pressure • These fumes can make breathing difficult • They are extremely flammable • They cause extreme pain if splashed in the eye • Like alcohol (a solvent), they attack the liver

  11. III—Safety Practices • Gas safety • Chemical usage • Safe chemical practices • Proper (improper) methods • User chemical storage • Personal protective equipment—PPE • Buddy system

  12. Gas Safety • Do not cycle any valves • Do not loosen any fittings • Do not disconnect any gas lines • Be aware of alarms or any unusual odors

  13. Chemical Usage • Chemical practice • Labware • Chemical storage • Chemical supplies

  14. Safe Chemical Practices • Be aware of possible chemical reactions • New chemicals must be approved by MiRC staff before bringing them into the cleanroom • Read MSDS before using chemicals • MSDS are available from web site • Users must provide an electronic copy of MSDS before brining a new chemical into the cleanroom

  15. Labware • Make sure that the labware you use is compatible with the chemicals (or mixtures) you pour into them • Example: HF will attack (etch) a glass container

  16. Proper (Improper) Methods • Improper (shown) • Do not rinse wafer, or pour solvents down the drain • Proper • Use the solvent waste jug or beaker • Pour the contents of the beaker into the jug

  17. Personal (Personnel) Safety • Personal Protective Equipment • Buddy System • Contact Lenses

  18. Personal Protective Equipment (PPE) • The following PPE is required while using chemical in any hood: • Eye protection • Gloves • Face shield • Apron • Your cleanroom garment is NOT protective equipment

  19. Buddy System • Two or more people must be in the lab at any one time • It is a cleanroom violation to be in the lab alone • This is for your safety—and it’s the law

  20. Additional Issues • Irresponsible people endanger everyone • Report unsafe practices to the cleanroom staff • Contact lenses • They are allowed—with a warning • Contact lenses may trap chemicals, making eyewash more difficult • Wear a face shield over your safety glasses when working in the hoods

  21. Wet Sinks/Fume Hoods • Chemical bench operation • The hoods are shared equipment—wipe it down before you leave • Hot plates • Can cause sever burns • Keep flammables away from the hot plates • Chemical bench use rules • Do not use until properly trained

  22. What’s Wrong With This Picture? • Do not put yourself in a position that increases the risk of chemical exposure • Putting your face at sink top level is dangerous • Splash hazard • Inhalation hazard • Do not rest your hands/arms on the sink surface

  23. What’s Wrong With This Picture? • Do not lean into the hood • You expose yourself to harmful fumes • Stay behind the sash • (The plastic screen)

  24. Electrical Concerns • Do not operate equipment with cover panels removed • Do not operate equipment with frayed wires • For example: • E-beam evaporator--10,000 volts • Plasma etchers--high power RF • Most equipment runs on 208 volts 60+ amps • It only takes 0.1 amps to kill you!

  25. The Bottom Line on Safety • Safety is everyone’s responsibility • You are responsible for your own safety • Do your homework • Read the Material Safety Data Sheet (MSDS) for every chemical you work with • If you do not understand, ask questions

  26. Burdell,George Drybox B13 george.burdell@mirc.gatech.eduPI: Rose, Bob IV—Storage and Disposal of Chemicals • Label all individual containers • Change label quarterly • Place old chemicals on storage cart

  27. User Chemical Storage • Chemicals • Photoresist • Polymers • No acids/bases • Store them in the appropriate cabinets

  28. Chemical Waste • Acids and Bases • Pour down the drain with running city (gray tap) water • Solvents & photoresist • Pour into the solvent waste jugs • DO NOT POUR SOLVENTS DOWN THE DRAIN

  29. Empty Waste Bottles • Empty acid and bases • Triple rinse with water, pour down the drain and dispose of the bottle • Empty solvent bottles (one gallon bottles) • Leave the empty bottle in the hood with the cap off • Staff will dispose of the bottle • Refill the squirt bottles—do no throw away

  30. Waste Containers • Place all used/waste chemicals on the chemical cart • Do not pour plating solutions down the drain • Place them on the waste chemical cart

  31. V—Accidents/Emergencies • Emergency Phones • Emergency Response Equipment • Chemical Accidents • Responding to a spill • Escalation • Transporting victims • Toxic Gas Alarms • Safety Showers • Evacuation Routes

  32. Emergency Phones • Emergency phones • Cleanroom entrance • Center cleanroom isle • Dial x42500 (404-894-2500) Georgia Tech Police • Add this number to your mobile phone • State the nature of the emergency • Do not dial 911—they will not know where you are

  33. Emergency Response Equipment • Spill response kits • Located in the chase between the Class 1000 and Class 10 photobays • Acid neutralizer • Base neutralizer • Absorbent material

  34. Responding to a Spill • You are expected to clean up small spills you made yourself • You know what you spilled • If you cannot, or are not sure what to do, call the staff • Report all spills regardless of size • Report all found spills, water leaks, or unknown materials

  35. Escalation • First person—you—clean it if you can • MiRC staff • GA Tech Environmental Health and Safety • HAZMAT • Important—report all spills • Call GTPD after hours—as well as MiRC staff

  36. Toxic Gas Alarms • Located on the cleanroom walls • Sensors located near the gas source • Plasma etchers • Plasma Deposition • Gas cabinets • If the alarm goes off, evacuate immediately

  37. Toxic Gases Used—Partial Listing • Phosphine • Silane • Chlorine • Boron Trichloride • Silicon Tetrachloride • Ammonia • Do not take the alarms lightly

  38. Emergency Showers/Eyewash • Use the eyewash if you get any chemicals in your eyes • Force your eyes OPEN! • Buddies—make sure the victim stays in the eyewash for at least 15 minutes, they will lose track of time in the eyewash and think a few seconds is a long time

  39. Emergency Shower • Use the emergency shower whenever you are exposed on the torso, head or legs • Take ALL of your clothes off • Your clothing will trap the chemicals next to your body • Anyone not directly assisting the victim must leave the cleanroom

  40. Transporting a Victim • Minor injuries—other than chemical exposures—require attention commensurate with the injury • All chemical exposures require hospitalization • Grady Hospital is the only Level One trauma center in the area

  41. Transportation Procedure • Call GTPD 404-894-2500 and state the nature of the emergency • For chemical exposures, use the Emergency Instruction Booklet located by the phone • Place a MSDS of the exposed chemical into the booklet • Print extra copies for the police and ambulance drivers

  42. Cleanroom Evacuation Routes

  43. Evacuation Procedure • Leave the cleanroom immediately—do not de-gown • Gather at the front of the Pettit Building on Atlantic Drive • Remove your gown outside

More Related