1 / 3

Hole Saw

Coping Saw. Marking Gauge. Hole Saw. Dowel Centre Points. Centre Punch. Rasp. Tri Square. Sliding Bevel. Metal Scribe. Hack Saw. Tenon Saw. Mallet. Palm Sander. Belt Sander. G Clamp. Bench Hook. Forstner Bit. Scroll Saw. Smoothing Plane. Ca lipers.

tocho
Download Presentation

Hole Saw

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Coping Saw Marking Gauge Hole Saw Dowel Centre Points Centre Punch Rasp Tri Square Sliding Bevel Metal Scribe Hack Saw Tenon Saw Mallet

  2. Palm Sander Belt Sander G Clamp Bench Hook Forstner Bit Scroll Saw Smoothing Plane Calipers Junior Hacksaw Pillar Drill Sash Cramp Disc Sander Chisel

  3. U. This is used to cut curves in woods and plastics, the blade can also be removed – electrically powered. P. This is used to remove even strips of waste wood to give a flat surface. K. This is used to remove areas of waste wood. A. Used to cut perfect circles out of wood. F. Used to mark out straight, parallel lines in wood. L. This is used to cut curved edges into plastics and wood – the blade can also be removed. G. Used to mark out, in wood, where you need to drill into on the opposite piece to make dowel joints. B. Used to mark the place, in metal, where a hole needs to be drilled. V. This is used to cut holes out of piece of wood, metal and plastic. Q. This is used to cut straight lines in metals and plastics. C. It is at a 90 degree angle which when placed on a straight edge helps to draw a perfectly straight line. R. This is used to secure larger pieces of work or to hold while larger objects that have been glued set. H. This is used to mark out different angles with a straight line. W. This is used to remove waste wood in an even way. M. This is used to carve away waste wood. S. This is used to remove areas of waste wood. It is portable but still electrically powered. N. This is used to secure down pieces of work. I. This is used to cut straight lines in metal. D. Used to mark out metal and add detail. W. This is used to remove waste wood in an even way. O. This is used to support your work as you cut straight edges with a tenon saw. T. This is used to remove circular areas of waste wood. X. These are used to accurately measure small distances. E. Used to hammer dowel into wood or used with chisels. J. This is used to cut straight lines in wood.

More Related