1 / 5

ADIY Flame Sensor Module - Tomson Electronics

A Flame Sensor is a device that can be used to detect presence of a fire source or any other bright light sources. There are several ways to implement a Flame Sensor but the module used in this project is an Infrared Radiation Sensitive Sensor.

tomsonelectronics
Download Presentation

ADIY Flame Sensor Module - Tomson Electronics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ADIY Flame Sensor Module ADIY Flame Sensor Module can detect flames in the 760 – 1100 nanometer wavelength range. Small flames like a lighter flame can be detected at roughly 0.8m. The detection angle is roughly 60 degrees and the sensor is particularly sensitive to the flame spectrum. An on-board LM393 op-amp is used as a comparator to adjust the sensitivity level. The sensor has a digital and analog output and sensitivity can be adjusted via the blue potentiometer.

  2. ADIY Flame Sensor Module ADIY Flame Sensor Module is used to detect fire/flame sources or other wavelength light sources in the range of 760nm – 1100 nm. It is based on the YG1006 sensor, a high speed, and high sensitive NPN silicon phototransistor. Due to its black epoxy, the sensor is sensitive to infrared radiation. The sensor can be a great addition to a firefighting robot, it can be used as a robot’s eye to find the fire source. When the sensor detects flame the Signal LED will light up and the D0 pin goes LOW. The module has 2 outputs: Analog, which gives a real-time voltage output signal on thermal resistance and digital which allows temperature thresholds to be set via a potentiometer.

  3. ADIY Flame Sensor Module FEATURES • Output Channel: 1 • Power Supply: 3.3/5V • PCB Board Size: 32 x 14mm(L*W) • Hole Size: 3mm • Material: Electric Part • Net Weight 3g • indicator light: a green one for the switch, a red one for power. • Built in a potentiometer for sensitivity control.

  4. +91 86066 50999 www.tomsonelectronics.com

More Related