1 / 9

ANSYS simulations for the Drive Beam U-clamps*

ANSYS simulations for the Drive Beam U-clamps*. * continuation of EDMS doc 1133226: “MB U-clamps FEA”. Index. Boundary Conditions Case Study Cases Results Summary & Future Steps. CLIC Two-Beam Module DB Girder Boundary Conditions. P1. P2. P3. P4. A DB. B DB. C DB. Q1 DB.

trisha
Download Presentation

ANSYS simulations for the Drive Beam U-clamps*

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ANSYS simulations for the Drive Beam U-clamps* • * continuation of EDMS doc 1133226: • “MB U-clamps FEA” Nick Gazis, CERN-BE/RF & NTU-Athens

  2. Index • Boundary Conditions • Case Study • Cases • Results • Summary & Future Steps Nick Gazis, CERN-BE/RF & NTU-Athens

  3. CLIC Two-Beam Module DB Girder • Boundary Conditions P1 P2 P3 P4 ADB BDB CDB Q1DB DDB EDB FDB Q2DB DB type 0 II I Model Boundary Conditions • 3D layout with colored clamp cases (explanatory slide following): • Case 1 (blue): Sliding • Case 2 (green): Fixation • Case 3 (red): Sliding (Analysis simplified model) Nick Gazis, CERN-BE/RF & NTU-Athens

  4. CLIC Two-Beam Module DB Girder • Boundary Conditions for the U-clamps • Cases : • Case 1* (blue) –Sliding– • 1 DoF along the z-axis • (longitudinal dilatation of PETS) • 0 DoF along the y-axis • 0 DoF along the x-axis • Case 2 (green) –Fixation– • 0 DoF along the z-axis • 0 DoF along the y-axis • 0 DoF along the x-axis • Case 3* (red) –Sliding– • 1 DoF along the z-axis • (longitudinal dilatation of PETS) • 0 DoF along the y-axis • 0 DoF along the x-axis • *[only layout difference between cases 1 & 3, same principle for the boundary conditions] • Case Study: • U-clamp baseline material: Aluminum Alloy; • Boundary Conditions: • Gravity; • Vacuum: Pressure Load • (ΔP=1 bar); • Thermal loading for the PETS (20-40°C). Input from D. Gudkov (Analysis simplified model) Nick Gazis, CERN-BE/RF & NTU-Athens

  5. Case Study – Models & Cases Meshed Model U-clamps models Case 2: Fixation U-clamp Case 1: Sliding U-clamp Case 3: Sliding U-clamp Nick Gazis, CERN-BE/RF & NTU-Athens

  6. Results – Deformations Case 2: Fixation U-clamp Case 3: Sliding U-clamp Case 1: Sliding U-clamp Nick Gazis, CERN-BE/RF & NTU-Athens

  7. Results – Stresses Case 2: Fixation U-clamp Case 3: Sliding U-clamp Case 1: Sliding U-clamp Nick Gazis, CERN-BE/RF & NTU-Athens

  8. Summary & Future Steps • Summary of Accomplished Tasks: • Study of boundary conditions for MB and DB; • MB & DB U-clamps modelization; • MB & DB U-clamps and MB & DB RF-components simplification; • MB & DB U-clamps simulation. • Future Tasks & Testing: • DB U-clamps optimization (if needed); • Simulation of the overall subassembly of the DB components (with the fixed DB-quads supports and the interconnecting bellows). MB U-clamps FEA: EDMS 1133226 Comments are always welcome! Nick Gazis, CERN-BE/RF & NTU-Athens

  9. Thank you! Nick Gazis, CERN-BE/RF & NTU-Athens Nick Gazis, CERN-BE/RF & NTU-Athens 9

More Related