What are the basic differences between power and distribution transformer?

1. What are the basic differences between power and distribution transformer? Vajra Transpower is a reputed ​transformer manufacturing company​, which manufactures both powers as well as distribution type transformers. The working principle and applications of both types of transformers are different. As one of the leading ​power transformer manufacturers in Hyderabad and a distribution transformer manufacturer, Vajra Transpower find out the basic difference between these two transformers. Power transformers are basically used in transmission purposes for high voltages. The step-down and step-up transformer manufacturers use this type of transformers and step-down & step-up applications. Distribution transformers are used for low voltage distribution to end-user connectivity. It is generally rated less than 200MVA. Transformer size: For transformers. Its high voltage is more than 33KV and 100% efficiency. If we compare its size, then it has a big size than the distribution transformer, used in the transmission substation and generating station. Its insulation level is also very high, whereas distribution transformers are used for the distribution of electrical energy at a very low voltage level. Its voltage level is less than 33KV for industrial purposes and 440v-220v for domestic purposes. The electrical transformers manufacturers use this type of transformers for low-efficiency requirements. It is small in size, easy to install, having low magnetic losses & it is not fully loaded. heavy load transmission, transformer manufacturers build power Losses: The power transformer manufacturers build the power transformers for transmission network, that’s why they don’t connect to the consumers directly, so load fluctuations are very less. These types of transformers are working 24hours a day, so iron losses and copper losses take place throughout the day.

2. The average loads are near to the full loaded or these full loaded transformers are manufactured by the ​dry type transformer manufacturer in such a way that at full load condition, they can be 100% efficient. These types of transformers are very independent of time. Only the basis of power, efficiency can be calculated. In the distribution network, distribution transformers are manufactured by distribution transformer manufacturers and used, which are directly connected to the clients. In this caseload, fluctuations are very high. All the time, these transformers are not fully loaded so only iron losses take place 24hours throughout the day and copper loss takes place based upon the load cycle. In this case, average loads are near about 75% of the full load and these types of transformers are designed in such a way that maximum efficiency occurs at nearly 75% of full load. Efficiency: The actual difference between distribution and power transformer is that the distribution transformer manufacturer transformer-based upon the 60 to 70% efficiency as normally it doesn’t operate at full load all the time. Its load depends upon the demand for distribution. in hyderabad manufactures the Whereas power transformers are manufactured by the power transformer manufacturers having the maximum efficiency at 100% load since it always runs at 100% load being near to generating station. Distribution transformers are used where the voltage tends to be lower. Most of the distribution systems tend to involve in clusters of loads fed from distribution transformers. Contact Us: Website: http://www.vajratranspower.com Email: info@vajratranspower.com Mobile No: +91-912168511