1 / 3

Notes on: Cache Comparison Problem

Notes on: Cache Comparison Problem.

vasilis-julius
Download Presentation

Notes on: Cache Comparison Problem

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Notes on: Cache Comparison Problem A 450MHz Pentium with 32KBytes L1 cache, 128MBytes RAM, and a 133MHz system bus runs a program with an average working set size of 80KBytes. While in a working set the program has a 0.9997 probability that the next memory request will be from this working set and a 0.9 probability that the next memory request will be the next instruction/data value in memory (i.e. 10% of the time a request is from a random memory address in the working set). (Note: when the program changes working sets, it will begin making memory requests from the new working set with 0.9997 probability.) (1) Determine how much (if any) performance improvement could be achieved by adding a 256KByte L2 (access speed= 450/2MHz) to the processor. (2) Determine what size memory blocks should be moved between cache and RAM. (3) Give an outline of a memory caching strategy that makes sense. It is strongly recommended that you take the time to investigate the details of cache memory, especially the operation of the cache controller chip-set. As a guide, try to answer the following questions about the operation of the Pentium II/III and the related cache controller. When there is a cache miss, how many words of memory does the CPU need to be able to continue processing? When the cache memory is replaced, how many words are transferred? (assume 4K). What hardware component is responsible for the transfer of blocks of memory to cache? Given the stats listed in the problem, what will happen to the hit-ratio while a new block of memory is being loaded into cache?

  2. start is memory access at next address is memory access in working set no no yes yes is memory access in cache yes tacc=tacc+L1acc num=num+1 tacc=tacc+block_size(.75L1acc+.25RAMacc) num=num+block_size is num>=numtotal no yes tavg=tacc/num stop Flowchart for L1 Only Cache Analysis simulates block read for 4-way set associative L1 cache

  3. start is memory access at next address is memory access in working set no no yes yes which cache L1 L2 tacc=tacc+L1acc tacc=tacc+L1acc tacc=tacc+block_size(.75L2acc+.25RAMacc) num=num+block_size num=num+1 is num>=numtotal yes tavg=tacc/num stop Flowchart for L1/L2 Cache Analysis simulates block read for 4-way set associative L2 cache You may assume a write through operation between L1 and L2 cache (i.e. no additional delay)

More Related