How to Fix a Sinking Foundation Underpinning

1. How to Fix a Sinking Foundation: Underpinning Created By: vicmetrounderpinning.com.au

2. What is Underpinning? Underpinning is the work of extending the foundation to provide greater stability and support for a building. It is usually required when the slab has sunk lower than its original position, or there is an uneven settlement of different parts of the lot. Foundation would be the base of any home, it plays an important role in construction. Foundation requires to be built as strong as possible to prevent damage or collapse. A strong foundation is created by using concrete.

3. 2 3 4 5 1 •  Mud jacking/Slab jacking Caisson and Girder Beam Types of Underpinning Push Pier Systems Helical Pier Systems Polyurethane Foam

4. Mud jacking is the process of raising or leveling a foundation or slab. It’s a great solution if you have sunken concrete, a driveway that has settled, or an uneven walkway. It uses high-pressure mud in order to raise sunken areas in your foundation and slabs.  Mudjacking and Slabjacking Underpinning Mud jacking is a form of ground stabilization. It fills holes and voids in the foundation of your home or business to provide adequate support. This process follows the drill, pump, and patch application model. If you need to raise your concrete slab but are not ready to get a new driveway in place, try mud jacking! This process makes it easy to repair sunken concrete driveways, parking lots, and more.

5. Concrete caisson and girder beams are the same, but caisson is part of the foundation of a bridge or tunnel, while girder beams bear the load of structures like freeways. They don’t look that different from one another, but there are some major differences between them. Caisson and Girder Beam Underpinning This is a common problem builder’s face. The traditional method of building is noisy and messy and not exactly appealing to homeowners. On top of that, it takes longer to build your home because excavators can only work during daylight hours. It is referred to as mud jacking because mud is a synonym for cement.

6. Push Pier underpinning is a relatively new technology. This utilizes steel interlocking pipes that are hydraulically driven into competent, load-bearing soil and anchored to a home’s foundation via a remedial bracket. This method eliminates the need for large excavation and prevents further damage to your home’s foundation. Push Pier Underpinning  Push Piers offer a safe and affordable option to secure your sinking foundation. With just a few small steps, they can be installed in place of traditional concrete footings. They act as underground stilts, keeping your home steady. Push piers are one of the most common methods for installing foundation walls. They use the weight of your house to hold them in place during the installation process. The only downside to push piers is that they rely on the weight of your house, so they may not be a feasible option if you have a single-story home.

7. Helical piers are a fast, effective solution for stabilizing a sinking foundation. They’re excellent for getting you back on the road quickly and with minimal disruption to your daily routine. Helical Pier Systems Helical Piers are a great way to lift and stabilize a sinking that is cracked or has settled unevenly. They can restore your home’s stability without having to remove the house from its foundation and trucking away tons of soil. Helical piers are a fast, effective solution for stabilizing a sinking foundation.

8. Polyurethane is a heavier duty foundation repair option. A polyurethane injection process displaces the ground around it, rather than just filling it in as mud jacking does. Expensive but permanent. Polyurethane underpinning is a good investment for your home’s foundation to ensure its longevity. Polyurethane Underpinning  Polyurethane foam is an injected, expanding foam used in a variety of materials to reduce volume expansion by rapidly expanding as an impermeable seal around water leaks. This material is useful for filling voids, structure support and leveling. It prevents mold growth by forming an insoluble polymer bond with hard surfaces, yet remains flexible enough to adapt to irregular shapes. Polyurethane foam is easy to use and cost-effective, making it ideal for homeowners, contractors, architects, engineers, and any other professionals who need a versatile and effective solution to filling cracks and voids of all kinds. You can rely on it for virtually any application that requires void filling.

9. Contact Information 03 9102 1452 Phone number: Email: info@vicmetrounderpinning.com.au https://www.vicmetrounderpinning.com.au/ Website:

10. Thank You