1 / 99

Chapters 5, 6, 9 : Measurement and Geometry I and II

Chapters 5, 6, 9 : Measurement and Geometry I and II. A conjecture. A conjecture is a mathematical statement that appears likely to be true, based on evidence (or observation) but has not been proven. Conjecture is used constantly in Geometry and Geometric Proofs . .

virgo
Download Presentation

Chapters 5, 6, 9 : Measurement and Geometry I and II

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Chapters 5, 6, 9 : Measurement and Geometry I and II

  2. A conjecture • A conjecture is a mathematical statement that appears likely to be true, based on evidence (or observation) but has not been proven. • Conjecture is used constantly in Geometry and Geometric Proofs.

  3. Intersecting Lines and Line Segments • When two lines intersect, four angles are produced. • Opposite angles are equal in measure. • Two angles that add to 180° are supplementary. • Two angles that add to 90° are complementary.

  4. Perpendicular Line Segments • Perpendicular line segments are line segments that intersect at a 90° angle upward or downward. • Perpendicular lines have slopes that are negative reciprocals of each other (see example on chalkboard)

  5. Parallel Line Segments • Parallel line segments are line segments that never intersect. • Parallel lines have identical slopes (Chapter 2) but different start points (y-intercepts)

  6. Parallel Lines Theorems • When a line intersects parallel lines, three angle theorems are formed: (see page 259) • Alternate Interior Angles theorem (Z pattern) • Corresponding Angles theorem (F pattern) • Supplementary Interior Angles theorem (C pattern)

  7. Prefixes are always attached to the beginning of a word and mean a specific thing. Tri = 3 Tetra = 4 Penta = 5 Hexa = 6 Hepta = 7 Octa = 8 Nona = 9 Deca = 10 etc Common prefixes

  8. A polygon • A polygon has all sides congruent and all angles congruent. • Polygons can be both regular and irregular. • Regular polygons have both reflective and rotational symmetry. (Major difference between regular and irregular polygons)

  9. Examples of common regular polygons • Regular trigon (equilateral triangle) • Regular tetrahedron (square) • Regular pentagon • Regular hexagon • Regular octagon

  10. Here are the frequently used prefixes of the metric system: Kilo- (k) = 1000 Hecto- (h) = 100 Deca- (da) = 10 Base- = 1 Deci- (d)= 1/10 = 0.1 Centi- (c) = 1/100 = 0.01 Milli- (m) = 1/1000 = 0.001 The prefixes of the metric system

  11. Converting measurements into different metric units • To convert metric units, you must use the metric staircase.

  12. How to use the metric staircase #1 • When you go down the staircase, you are converting from a larger unit to a smaller unit. • So, you multiply the given number by 10number of steps

  13. An example of conversion #1 • To convert 6 km to meters: • 6 km = (6 x 103) m • 6 km = (6 x 1000) m • 6 km = 6000 m

  14. How to use the metric staircase #2 • When you go up the staircase, you are converting from a smaller unit to a larger unit. • So, you divide the given number by 10number of steps

  15. An example of conversion #2 • To convert 1200 mL to liters: • 1200 mL = (1200 ÷ 103) L • 1200 mL = (1200 ÷ 1000) L • 1200 mL = 1.2 L

  16. The perimeter • The perimeter is the total distance around a figure’s outside. • The symbol of perimeter is P. • The perimeter is a one-dimensional quantity measured in linear units (an exponent of 1) , such as millimeters, centimeters, meter or kilometers.

  17. Area • Area is the measure of the size of the region it encloses. • The symbol of area is A. • Area is a two-dimensional quantity measured in square units (an exponent of 2) such as centimeters squared, meters squared or kilometers squared.

  18. Area of a rectangle • To calculate the area of a rectangle: • Arectangle = length x width

  19. Area of a triangle • To calculate the area of a triangle: • Atriangle = ½ x base x height

  20. A composite figure • A composite figure is a figure that is made of 2 or more common shapes or figures. • For example, you can break up a pentagon (a composite figure) into a rectangle and a triangle.

  21. What is a circle? • A circle is a 2-dimensional geometric shape consisting of all the points in a plane that are a constant distance from a fixed point. • The constant distance is called the radius of the circle. • The fixed point is called the centre of the circle. • There are 360° in a complete rotation around a circle.

  22. What is pi? • Pi is an irrational number that states the ratio of the circumference of a circle to its diameter. • The symbol for pi is ∏ • Its value is 3.1412… (it is a non repeating decimal value) • To make life easier, we will assume that the value of pi is 3.

  23. The circumference of a circle • The circumference of a circle is the distance around the circle. • So, the circumference is the perimeter of a circle. • The symbol of the circumference is C.

  24. How to calculate the circumference • To calculate the circumference of a circle: • C = (2)*(Π)*(r) or C=(Π)*(d) • r is the radius of the circle • d is the diameter of the circle.

  25. How to calculate the area of a circle • To calculate the area of a circle: • A = (Π)*(r2)

  26. Geometry vocabulary terms • Congruent means the same size and the same shape. • Parallel means in the same plane but no intersection. • Un net can help visualize the faces of a 3-D figure (see page 221) • Collinear means that all points are in the same straight line.

  27. Prisms and cylinders • Prisms and cylinders have 2 faces that are congruent and parallel.

  28. There are 3 common examples: a rectangular prism a cylinder a triangular prism Examples of prisms and cylinders

  29. Surface area of prisms and cylinders • The surface area of a prism is equal to the sum of all its outer faces. • The surface area of a cylinder is equal to the sum of all its outer faces.

  30. 3-D composite figures • A composite 3-D figure/shape is made up of 2 or more 3-D shapes/figures.

  31. Surface area of 3-D composite figures • To determine the surface area of three dimensional figure is the total outer area of all its faces. • So, the surface area is equal to the sum of all its faces (add them all together)

  32. The volume of prisms and cylinders • The volume of a solid is the amount of space it occupies. • The symbol of volume is V. • The volume is a three-dimensional quantity, measured in cubic units (an exponent of 3), such as millimeters cubed, centimeters cubed, and meters cubed.

  33. The capacity of prisms and cylinders • The capacity is the greatest volume that a container can hold. • The capacity is measured in liters or milliliters.

  34. How to calculate the volume of a prism: • To calculate the volume of a prism: • Vprism = area of the prism’s base x prism’s height • Vprism = Abase x h

  35. How to calculate the volume of a cylinder: • To calculate the volume of a cylinder: • Vcylindre = Πr2 x h

  36. How to calculate the volume of 3-D composite figures • You can find the volume of a 3-D composite figure by adding the volumes of the figures that make up the 3-D shape.

  37. The volume of 3-D figures • The volume is the space that an object occupies, expressed in cubic units. • A polygon is a two-dimensional closed figure whose sides are line segments. • A polyhedron is a three-dimensional figure with faces that are polygons. The plural is polyhedra.

  38. We are going to calculate the volume of three 3-D figures: A cone A pyramid A sphere 3-D figures

  39. A cone • A cone is a 3-D object with a circular base and a curved surface.

  40. How to calculate the volume of a cone • To calculate the le volume of a cone: • Vcône = 1/3 x (the volume of cylinder) • Vcône = 1/3 x Πr2 x h

  41. A pyramid • A pyramid is a polyhedron with one base and the same number of triangular faces as there are sides on the base. • Like prisms, pyramids are named according to their base shape.

  42. How to calculate the volume of a pyramid • To calculate the volume of a pyramid: • Vpyramide= 1/3 x (the volume of prism) • Vpyramide = 1/3 x Abase x h

  43. A sphere • A sphere is a round ball-shaped object. • All points on the surface are the same distance from a fixed point called the centre.

  44. How to calculate the volume of a sphere • To calculate the volume of a sphere: • Volume of a sphere = 4/3 x Πr3

  45. Surface area of 3-D figures • Surface area is the sum of all the areas of the exposed faces of a 3-D figure. • The symbol for surface area is At

  46. How to calculate the surface area of a cylinder • To calculate the surface area of a cylinder: • At= 2Πr2 + 2Πrh

  47. How to calculate the surface area of a cone • To calculate the surface area of a cone: • It is the sum of the base area and the lateral area. • At = Πr2 + Πro

  48. The slant height • The length of the slant height uses the symbol s • The slant height is calculated by using the Pythagorean relationship.

  49. How to calculate the surface area of a sphere • To calculate the surface area of a sphere: • At = 4Πr2

  50. A cube • A cube is the product of three equal factors. • Each factor is considered the cube root of this particular cube/product. • For example, the cube root of 8 is 2 because 23 = 2 x 2 x 2 = 8

More Related