1 / 31

Safety Training Presentations

Safety Training Presentations. FORKLIFT OPERATOR SAFETY TRAINING. Forklift Operator Training. Who needs forklift training? Anyone who operates a forklift Who must conduct the training? A knowledgeable trainer Why is training necessary? Forklifts pose many hazards

wallin
Download Presentation

Safety Training Presentations

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Safety Training Presentations FORKLIFT OPERATOR SAFETY TRAINING

  2. Forklift Operator Training • Who needs forklift training? • Anyone who operates a forklift • Who must conduct the training? • A knowledgeable trainer • Why is training necessary? • Forklifts pose many hazards • Approx. 100 deaths and 38,000 injuries/year • Most Common accidents: • Tip over • Struck by lift or struck by load

  3. Forklift Safety Hazards • Forklifts are very heavy • Average automobile - 1,000 - 2,000 lbs. • Average forklift - 4,000 - 8,000 lbs. • Loads can be heavy • Too heavy to lift by hand • Forklifts or their loads can be unstable • Forklifts can roll over easily • Loads can fall off forks or cause roll over

  4. Pre-Use Inspections • Inspect forklift before each use • Don’t know condition left in by last user • Not inspecting the forklift prior to use could lead to a hazardous situation or cause serious damage to the forklift and/or the load

  5. Brakes Steering Horn Lights Oil Coolant Battery/LP Tank Hoist Forks Engine/Drive Motor Tires Misc. Cage Seat belt General overall condition of the forklift Pre-Use Checklist

  6. Pre-Use Inspection - Lift Mechanisms • Inspect mast for damage • Broken or cracked weld point • Make sure roller tracks are greased and free to travel • Inspect forks • Cracks on ends, along blades or at heels • Make sure not bent • Check hydraulic lines and fluid levels

  7. Pre-Use Inspection - Lift Mechanisms • Inspect all lift and tilt cylinders • Leaks • Mounting hardware • Inspect tires • Excessive wear • Proper inflation (if not solid rubber)

  8. Propane Tank Inspection • Inspect cylinder for damage • Cracks and broken weld points • Inspect • Valves, nozzles and hoses • Be aware of flammability • Three ways to detect leaks • listen for gas escaping • smell odor • look for frost on the coupling

  9. Changing Propane Tanks • No smoking! • Shut off cylinder valve before turning off forklift to reduce pressure in the fuel line • Liquid propane is approx. -40 degrees • Wear heavy duty rubber gloves • Wear safety glasses • Make sure pressure relief valve points straight up when replacing the tank

  10. Battery Charging • Inspect batteries for worn parts and cables • Beware of acid • No smoking • Wear faceshield, goggles, apron, rubber gloves • Only add water after charging • Make sure charger is off before disconnecting the battery • Remove all jewelry • Use hoist or roller system when replacing

  11. Capacity Plates • Must be on all forklifts • If missing or illegible, replace • Information found on capacity plates • Model # • Max load weight • Max lift height • Serial # • Manufacturer information

  12. Starting the Forklift • Apply the foot brake • Shift gears to neutral • Turn the key • Check gauges and indicators • Check controls, steering and brakes for smooth operation

  13. Operating the Forklift • Know locations and functions of all controls and gauges • Be aware of what is going on around you • Be aware of potential problems with the forklift • Be sure path of travel is free from hazards • Traveling speed in doors should not be any faster than a quick walking pace

  14. Handling and Moving Loads • Check the Capacity Plate to be sure the forklift can handle the load • Check the load for weight and stability • If load is not marked • Contact distributor/shipper of the load • Lift the load 1-2 inches to test the stability of the rear wheels and the forklift • If the forklift struggles, set the load down and if possible break load into smaller, more manageable loads

  15. Stability Triangle

  16. Stability Triangle • The closer the center of gravity (CG) is to line BC the more stable the forklift is • The closer the CG is to lines AB or AC the more unstable the forklift becomes • If the CG ever goes outside the stability triangle, the forklift can tip • Loads too heavy or offset • Taking corner too fast • Traveling surface is not level

  17. Fulcrum Point • The front wheels of the forklift are the fulcrum point • The rear of the forklift has counter weights to help off set the weight of the load • Unloaded forklift is unstable - all the weight is in the rear • When the forks are loaded the weight of the forklift and load are more evenly balanced • Loaded forklift is more stable • When the load out weighs the counter weight the forklift can tip forward when the load is raised

  18. Tipping Forklift • What should you do? • Must be wearing seatbelt • Will keep you from falling out of caged area • Hold tightly to steering wheel with both hands • Keep hands and arms inside caged area • Plant feet flat on floor and press down • Keeps body stable and keeps legs in caged area • Lean in opposite direction

  19. Handling and Moving Loads • Picking up load • Approach the load straight on with the forks in the travel position • Stop when the fork tips are approx. 1 foot away from the load • Level forks and drive slowly forward until load is against backrest • Lift the load high enough to clear what is under it

  20. Handling and Moving Loads • Picking up load (cont.) • Look over both shoulders to make sure you are clear and slowly back out one foot • Sound horn before backing if can’t clearly see behind you • Slowly tilt mast back to stabilize the load

  21. Handling and Moving Loads • Setting down the load • Drive to location, square up to load area and stop about one foot away • Level the forks and slowly drive forward • Lower the load • Tilt the forks slightly forward • Look over your shoulders and back straight out until the forks clear the load

  22. Stacking and Unstacking • Lifting a load • Approach the load slowly with the forks in the travel position • Stop approx. one foot away from the load and raise forks to correct height • Level forks and drive forward until load is flush against backrest

  23. Stacking and Unstacking • Lifting a load (Cont.) • Lift high enough to clear the bottom load, look over both shoulders to see if clear to back and slowly back straight out • After clearing top of stack, stop and lower mast to travel position • Tilt forks back • Proceed to destination

  24. Stacking and Unstacking • Stacking a load • Approach placement area slowly and square • Stop about one foot away and lift mast high enough to clear the placement area • Move forward slowly until the load is square over the stack • Level the forks and lower the mast until the load is resting on the stack • Slowly back straight out

  25. Stacking and Unstacking • Additional tips • Never lift a load while moving • Stop completely before raising the mast • Make sure the top load is squarely stacked on bottom load • Always approach and leave the load area slowly • Always look over shoulders before backing up

  26. Driving with a Load • Travel with load tilted slightly back for stability • Travel with the load at the proper height • 4-6 Inches at fork tips • 2 Inches at heels • Drive in control • Drive in reverse if you cannot see over the load

  27. Driving on Inclines - Ramp/Slope • Always drive with the heavier or less stable end of the forklift pointing up the incline • If the forklift is loaded (heavier/less stable in front) • Drive forward up the incline with the load • Drive in reverse coming down the incline with the load pointed up the incline • If the forklift is not loaded (heavier in rear) • Drive forward down the ramp • Drive in reverse going up the ramp

  28. Stopped Forklift • When Parked or unattended • Forks flat on ground • Turn off engine • Set parking brake • Do not block: • Exits • Emergency equipment • Signs or postings

  29. Pedestrians • Pedestrians have the right of way • Slow down at intersections • Look before backing • Use horn when coming around blind corners and at blind intersections • Check mirrors at intersections if they are present in workplace • Pedestrians must be cautious in areas where forklifts may be operating

  30. Conclusion • Forklifts are more hazardous than most people usually perceive them to be • Pre-use inspections must be performed before each shift • It is important to understand how the load will affect the stability of the forklift • The operator must always be on the look out for hazards and pedestrians

More Related