1 / 11

Features … Learning to read the information

Features … Learning to read the information. Every drawing should include all the information… however, it is not always clear unless you know what you are seeing. L. Tatro CHSE 2011. Reading the numbers…. L. Tatro CHSE 2011. Symbols….

wanda-beard
Download Presentation

Features … Learning to read the information

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Features… Learning to read the information Every drawing should include all the information… however, it is not always clear unless you know what you are seeing. L. Tatro CHSE 2011

  2. Reading the numbers…. L. Tatro CHSE 2011

  3. Symbols… • #X: This means that this applies throughout the drawing ___# of times. • nThis means diameter • qThis means centerline • v This means Counterbore (a square cut oversized hole symmetrically around a smaller through hole • xThis means depth. This will be given when a hole, or counterbore does not go through the entire part. • w This means countersink. When a hole has an interior chamfer this symbol is used. • 8 2O Along with a countersink symbol, a degree value is given for the tapered angle. • 17.08 When seeing a set of numbers 17.25 stacked, this is used to give a acceptable range (tolerance). L. Tatro CHSE 2011

  4. Continued • RThis means radius • TYPThis means typical and is used when a drawing has a situation that repeats itself and is constant. • EQL SP Used when the distance between hole or features have a repeating value. Typically used in polar dimensioning . • BCmeans bolt circle and is used when a circular centerline is used to make the center locations of a bolt pattern. L. Tatro CHSE 2011

  5. Understanding the terms.. This segment will help you identify and understand many of the terms used in the drafting/machining industry for specific features.

  6. Fillet: A rounded interior blend between surfaces. Round: A rounded exterior blend between surfaces. Counterbore: A cylindrical recess around a hole, usually to receive a bolt head or nut.

  7. Countersink: A conical shaped recess around a hole, usually to receive a tapered screw head. Spotface: A shallow recess like a counterbore, used to provide a good bearing surface for a fastener. Boss: A short raised protrusion above the surface of a part, often used to provide a strong flat bearing surface. Boss

  8. Lug: A flat or round tab protruding from a surface usually to provide a method for attachment. Lug Flange: A flattened collar or rim around a cylindrical part to allow for attachment. Chamfer: An angled surface, used on cylinders to make them easier to start. Flange

  9. Neck: A small groove cut around the diameter of a cylinder or hub to receive a key, used to attach hubs, gears, and other parts to a cylinder so they won’t turn on it Neck Keyway : A shaped depression cut along the axis of a cylinder to receive a key (When mating two parts to prevent rotation). Keyway

  10. Knurl: A pattern form on a surface to provide for better gripping or more surface area for attachment, often used on knobs and tool handles. Rib: Like a boss, a rib is used internally to add strength to, or between features. Bushing: A hollow cylinder that is often used as a protective sleeve or guide, or as a bearing. RIB

  11. Self Quiz…. Left click to see the feature name in order 1 2 3 4 5 7 6 8 9 10 11 12 13

More Related