1 / 6

MSA Altair 5x Multi-Gas Detector

MSA Altair 5x Multi-Gas Detector. Quick Reference Guide. 1. PAGE. 2. RESET. 3. POWER. If available, take the Altair 5x out of its case and follow the quick start instructions included with the unit. .

watson
Download Presentation

MSA Altair 5x Multi-Gas Detector

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MSA Altair 5xMulti-Gas Detector Quick Reference Guide

  2. 1 PAGE 2 RESET 3 POWER

  3. If available, take the Altair 5x out of its case and follow the quick start instructions included with the unit.

  4. ShortTermExposureLimit: Concentration to which workers can be exposed continuously for a short period of time (~15-30 min.) without suffering from: 1. irritation 2. chronic or irreversible tissue damage 3. narcosis of sufficient degree to increase the likelihood of accidental injury, impair self-rescue or materially reduce work efficiency. Time Weighted Average: The average exposure over a specified period of time, usually a nominal eight hours. Workers can be exposed to a maximum of four STEL periods per 8 hour shift, with at least 60 minutes between exposure periods. ALTAIR 5X CALIBRATION POINTS

  5. Summary • Always start-up/calibrate the Altair 5x outside in a clean environment • Plug the pump intake with your finger for 3 seconds during initial “pump test” calibration, until test is successful • GREEN = GO • RED = REACT

More Related