170 likes | 190 Views
Detailed examination of natural metamict minerals and their thermal recrystallization products. Highlights include the experimental procedure, sample descriptions, and conclusions drawn from the study.
E N D
Detailed study of natural fully metamict minerals and products of their thermal recrystallization Cao Qiuxiang, Burakov B. E., Liu Xiangton,
Outline • Introduction • Experimental Procedure • Sample description • Products of its thermal Recrystallization • 5. Conclusions
1. Introduction • A lot of studies have been carried out to understand properties of metamict minerals in the past. • Metamict minerals are characterized by amorphous states • but initially they were crystalline. Due to admixture of natural • radioactive elements such as U and Th, their crystal structures • were destroyed. • Metamict minerals can be considered as natural analogues • of ceramic nuclear waste-forms affected by radiation damage. • Therefore, the study of metamict minerals helps to understand behavior of waste forms under geological conditions.
3. Sample description A mineral found as a large grain (2 x 3 x 2 cm in size) in granite pegmatites of Karelia, Russia It is assumed that initially it was single crystal.
3. Sample description Y-Fe-niobate Micrograph of electron microscope
3. Sample description Chemical Composition Empirical formula: (Y0.33Fe0.56U0.03Th0.01Ca0.01Mn0.04) ∑= 0.98(Nb0.73Ta0.05Ti0.26) ∑=1.04O4
4.Products of their thermal Recrystallization XRDafter annealing in air • “Columbite”“FeNb2O6” • “ Fergusonite-beta-(Y)” “YNbO4” “Tapiolite” “Fe (Ta,Nb)2O6” • “Uranium niobium oxide”? “U3O8·1.5 Nb2O5”
4.Products of their thermal Recrystallization “Fergusonite-beta-(Y)”. PDF№: 01-083-1319 Ce “Columbite” PDF№: 01-074-7356 after decay + caused by hetaing Fe o “Tapiolite”-(Fe)” PDF№: 01-074-2182
4.Products of their thermal Recrystallization XRDafter annealing in Vacuum “Tapiolite-(Fe)” “Fe (Ta,Nb)2O6” • “ Fergusonite-beta-(Y)” “YNbO4” “Ishikawaite” “ (U,Fe,Mn,Y)(Nb,Fe,Ta)O4” • “Iron niobim oxide” “Fe Nb O4” “Columbite-(Fe)” “Fe Nb2O6” o “Samarskite-(Y)” “ (Y,Fe,U)( Nb,Ti,Ta)O4” • “Fergusonite-(Y)” “ ( Y,Er)(Nb,Ta,Ti)O4”
4.Products of their thermal Recrystallization XRDafter annealing in Argon “Tapiolite”“Fe (Ta,Nb)2O6” • “ Fergusonite-beta-(Y)” “YNbO4” o “Samarkite-(Y)” “ (Y,Fe,U)( Nb,Ti,Ta)O4”
4.Products of their thermal Recrystallization 12 SEM Micrograph Homogeneous matrix After annealing in air (400оС, 1h) After annealing in vacuum (400оС, 3 h)
4.Products of their thermal Recrystallization 13 SEM Micrograph After annealing in air (700оС, 1h) After annealing in vacuum (700оС, 3 h)
4.Products of their thermal Recrystallization 14 SEM Micrograph After annealing in air (1000оС, 1h) After annealing in vacuum (1000оС, 1h)
15 4.Products of their thermal Recrystallization SEM Micrograph:Redistribution of U and Th (wt.%) “Fergusonite-beta-(Y)” U: 5.9 Th: 2.9 “Fergusonite-beta-(Y)” U:3.7 Th:0.2 “Tapiolite-(Fe)” U:20.1 Th:2.6 “Tapiolite-(Fe)” U:12.5 Th:4.6 After annealing in vacuum (1200оС, 1h) After annealing in air (1200оС, 1h)
5. Conclusion 16 • The temperature-induced structural recovery of metamict minerals is a complex process. • The essential redistribution of radionuclids was observed in the course of high-temperature recovery of initially metamict Y-Fe-niobate. • No formation of separate actinide-oxides was observed in matrices of the Y-Fe-niobate recrystallized in a broad range of annealing temperature.
“ “ 输入文字 在此录入上述图表的综合分析结论 在此录入上述图表的综合分析结论 在此录入上述图表的综合分析结论 在此录入上述图表的综合分析结论 在此输入标题 Thank you for your attention!