1 / 7

Migration Indicator on VDP Req

Migration Indicator on VDP Req. Yizhou Li ( liyizhou@huawei.com ) Bob Sultan ( bsultan@huawei.com ) Gu Yingjie ( guyingjie@huawei.com ) Ben Mack-Crane ( tmackcrane@huawei.com ). VSI 123. VSI 456. VSI 123. VM s. VM s. VM t. Problem. Server X. Server X. EVB Bridge A. EVB Bridge A.

wray
Download Presentation

Migration Indicator on VDP Req

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Migration Indicator on VDP Req Yizhou Li (liyizhou@huawei.com) Bob Sultan (bsultan@huawei.com) Gu Yingjie (guyingjie@huawei.com) Ben Mack-Crane (tmackcrane@huawei.com)

  2. VSI 123 VSI 456 VSI 123 VM s VM s VM t Problem Server X Server X EVB Bridge A EVB Bridge A • It is useful for the EVB Bridge server-facing port to be aware of whether the VDP request • is associated with a VM that is migrating; or • is associated with a VM that is starting/terminating; started vs. Server Y Server Y EVB Bridge B EVB Bridge B migration terminated

  3. NIC NIC Problems with DHCP snooping enabled on bridge port • Problems: bridge port snoops DHCPACK and binds IP/MAC/vid/port to filter the following traffic. When VM moves, VM won’t resend DHCP request and hence target port won’t listen any DHCPACK. Therefore filter won’t be enabled on target port. 6 migration 6. VM migration. VM VM VM VM vSwitch vSwitch Server Server 5. DHCPACK 1. DHCP request 1 5 4. DHCP Snooping and set up IP/MAC/vid/port filter 7. DHCP Snooping based filter on new port. How? 7 TOR 4 2. DHCP Request 2 DCN Note:DHCP Discover and DHCP Offer exchanges are ignored in picture 3 3. DHCP Ack DHCP Server

  4. snooped address 5.6.7.8 associated with VSI VDP Req MI=0 VSI 123 VM s lease request VDP Rsp lease granted 5.6.7.8 VDP Req MI=1 VDP Rsp lease query lease info 5.6.7.8 snooped address 5.6.7.8 associated with VSI DHCP Snooping Server X EVB Bridge A • DHCP snooping is used on edge bridges (EVB Bridges) to filter traffic that has not obtained an IP address via DHCP lease on the port (VSI); • When a VM moves, it does not issue another lease request resulting in failure of DHCP snooping at the target; • Solution is to communicate via VDP that VM (VSI) has migrated rather than starting new; DHCP Server Server Y EVB Bridge B

  5. Proposal 0 = VM newly started (i.e., not migrated) 1 = VM migrated • Use, for example, high-order bit of Reason field in VDP Request; • currently, reason field significant only on response; • For discussion whether useful to distinguish between terminated VM or migrated VM on De-associate;

  6. Backup slides

  7. DHCP leasequery (RFC4388) • Purpose: In case of DHCP relay reboots, relay sends leasequery to DHCP server to refetch the lease information • May get lease information via ANY one of MAC, IP and Client-Identifier

More Related