1 / 25

Grand challenge program (2002-2007) PIs

Recent Progress in High-Pressure Studies on Plastic Properties of Earth Materials COMPRES meeting at lake Tahoe June, 2004. Grand challenge program (2002-2007) PIs. P. Burnley (Georgia Tech.) H.W. Green (UC Riverside) S. Karato (Yale University) D.J. Weidner (SUNY Stony Brook)

xandy
Download Presentation

Grand challenge program (2002-2007) PIs

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Recent Progress in High-Pressure Studies on Plastic Properties of Earth MaterialsCOMPRES meeting at lake TahoeJune, 2004

  2. Grand challenge program (2002-2007)PIs • P. Burnley (Georgia Tech.) • H.W. Green (UC Riverside) • S. Karato (Yale University) • D.J. Weidner (SUNY Stony Brook) • W.B. Durham (LLNL) • [Y. Wang (APS)]

  3. Goal of this project • To develop new techniques of quantitative rheology experiments under deep Earth conditions (exceeding those in the transition zone: ~15 GPa, ~1800 K) • flow laws • deformation microstructures (fabrics)  global dynamics

  4. Quantitative rheological data at high-T from currently available apparatus are limited to P<3 GPa (80 km depth) Rheology of more than 90% of the mantle is unconstrained!

  5. Why high-pressure? • Despite a commonly held view that brittle strength is pressure-sensitive but plastic flow strength is pressure-insensitive, pressure dependence of plastic flow strength is important in Earth’s interior but can be determined only by high-P experiments. • Rheology of high-pressure phases, or rheology associated with a phase transformation (transformational plasticity, transformational faulting) can only be studied under high-P.

  6. Pressure effects Pressure effects are large at high P. [Depends strongly on V* (activation volume). V* in many materials is poorly constrained]

  7. Challenges in high-P rheology studies(How are rheological properties different from elasticity?) • Controlled generation of stress (strain-rate) • Measurements of stress under high-P • Plastic deformation can occur by a variety of mechanisms. • Large extrapolation is needed in time-scale(extrapolation in stress, temperature).  Careful strategy is needed to choose the parameter space and microscopic mechanisms must be identified. • Sensitive to chemical environment and microstructures (large strain is needed to achieve “steady-state” rheology and microstructure).

  8. Pressure effects on creep can be non-monotonic: a simple activation volume formulation may not capture the physics. strength, GPa pressure, GPa

  9. Deformation fabrics (of wadsleyite) depend on conditions of deformation. [MA stress relaxation tests]

  10. Various methods of deformation experiments under high-pressures Rotational Drickamer Apparatus (RDA) Multianvil apparatus stress-relaxation tests DAC D-DIA Very high-P Mostly at room T Unknown strain rate (results are not relevant to most regions of Earth’s interior.) Stress changes with time in one experiment. Complications in interpretation Constant shear strain-rate deformation experiments Large strain possible High-pressure can be achieved. Stress (strain) is heterogeneous. (complications in stress measurements) Constant displacement rate deformation experiments Easy X-ray stress (strain) measurements Strain is limited. Pressure may be limited.

  11. D-DIA (Deformation DIA) High-P and T, homogeneous stress/strain [Pressure exceeding ~15 GPa is difficult. Strain is limited.]

  12. RDA (Rotational Drickamer Apparatus) large strain (radial distribution), high P (because of good support for anvils) [Stress/strain is not uniform. Effects of initial stage deformation must be minimized.]

  13. RDA at X17B2 in NSLS RDA 13 elements SSD Picture Incident X-ray CCD camera Stage

  14. Stress measurement from X-ray diffraction d-spacing becomes orientation-dependent under nonhydrostatic stress. Strain (rate) can also be measured from X-ray imaging.

  15. Lattice strain measured by X-ray is converted to stress using some equations. Equations involve assumptions about stress-strain distribution which is not known apriori. In order to calculate the stress, one needs to understand stress-strain distribution (from the data + modeling). Recent results show significant deviation from elastic model. (Li et al. (2004), Weidener et al. (2004))

  16. 0.005 0.5 GPa 2.0 GPa D0471 (2.510-6) (1.210-5) 6.4 GPa 0.004 D0466 (9.510-6) 1.0 GPa (9.710-6) 0.003 0.002 Lattice strain 0.001 0.5 GPa (1.010-5) 0.000 -0.001 200 220 -0.002 222 -0.003 0 5 10 15 20 25 30 35 Total percent strain MgO: Compression versus extension (D-DIA) 6.4 GPa 1 GPa 1000K Strain rate: 0.9x10-5 s-1 Uchida et al. 2004, submitted

  17. Plastic deformation of olivine (Li et al., 2004)

  18. stress-distribution in a RDA

  19. Sample and diffraction geometry ~0.4 mm ring width Observed part by diffraction Diffracted X-ray (50 mm wide) Incident X-ray (50 mm wide) 6.5º 0.9 mm Effective length for diffraction

  20. Stress-strain conditions in sample 1 Z Y s1 Y s3 s1 s3 Simple shear Uniaxial compression Principal stress (s1, s3) direction Y = 0 and 90º Y = +45 and -45º Variation of d-spacing (Assuming . elastically isotropic) Hydrostatic d0: d for hydrostatic condition G: shear modulus t: Uniaxial deviatoric stress sS: Shear deviatoric stress

  21. 27ºC During rotation at P=15 GPa and T=1600 K Annealing at P=15 GPa after compression t = 0.6 GPa, sS = 0.7 GPa 300 K 900 K 1600 K By using Y = 0, ±45, ±90º geometry, uniaxial deviatoric stress and simple shear deviatoric stress can be determined independently.

  22. Pressure dependence of olivine rheology Li et al. (2004), V*< 3 cc/mol Karato and Jung. (2003) Karato (1977), V*=13.9 cc/mol (theory) Ross et al. (1979), V*~13 cc/mol Green and Borch (1987), V*~27 cc/mol Bussod et al. (1993), V*~5-10 cc/mol Karato and Rubie (1997), V*~14 cc/mol Karato and Jung. (2003), V*~14, 24 cc/mol Li et al. (2004), V*< 3 cc/mol

  23. Summary • Two new apparati have been developed (D-DIA and RDA). • Quantitative high-P and T deformation experiments have been conducted to ~10 GPa (MgO, olivine) by D-DIA and ~15 GPa by RDA (hcp-Fe, olivine, (Mg,Fe)O, wadsleyite, ringwoodite). --------------------------------------------------------- • Significant discrepancy exists between some of the high-P results and lower-P (better constrained) data (V*): parameterization problem? • Maximum P with D-DIA is ~10 GPa. • How to get higher P? harder anvil materials (sintered diamond?)

  24. Summary (cont.) • Deformation geometry with RDA is less than ideal. • Larger uncertainties in mechanical data. • Theoretical problems with stress measurements by X-ray diffraction sample assembly, better alignment • Chemical environment is not well controlled. stress/strain distribution in deforming polycrystals (heterogeous materials)

More Related