1 / 16

MICRO- AND NANOCRYSTALLINE CERAMIC - METAL FUNCTIONALLY GRADED MATERIALS

SEVENTH FRAMEWORK PROGRAMME THEME 4 – NMP: Nanosciences, N anotechnologies, Materials and New Production Technologies. Grant agreement no .: 228869. MICRO- AND NANOCRYSTALLINE CERAMIC - METAL FUNCTIONALLY GRADED MATERIALS FOR TRANSPORT APPLICATIONS. Katarzyna Pietrzak.

yannis
Download Presentation

MICRO- AND NANOCRYSTALLINE CERAMIC - METAL FUNCTIONALLY GRADED MATERIALS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. SEVENTHFRAMEWORK PROGRAMME THEME 4 – NMP: Nanosciences, Nanotechnologies, Materials and New Production Technologies Grant agreement no.: 228869 MICRO- AND NANOCRYSTALLINE CERAMIC - METAL FUNCTIONALLY GRADED MATERIALS FOR TRANSPORT APPLICATIONS Katarzyna Pietrzak

  2. EC Brochure:NoEs in NMP Success Stories

  3. KMM-NoE: ended 31.01.2009 international non-profit researchassociation (AISBL) legallyregistered13 March 2007 inBelgium for unlimitedduration

  4. Genesis: KMM-NoE(FP6) →Results of investigations KMM-VIN→ Research and infrastructure potential 1Idea of a new material (composition and morphology) for automotive and aerospace applications 2Looking for end-users 3 Collaboration of scientist and industrypartners MATRANS !!!

  5. OBJECTIVE The main objective of the MATRANS is: • to develop the series of advanced metal-ceramic FGM’s with enhanced, application-tailored properties targeted at specific applications in auto, aero-transport. • to promote comprehensive approach combining materialprocessing, characterisation and modelling.

  6. FGM’sto be: DEVELOPED CHARACTERISED MODELLED FGM I: Al2O3-Cu Al2O3-CuAg3Zr0.5 FGM II: Al2O3-NiAl Al2O3-Ni3Al

  7. APPLLICATIONS Thrusters Valves Brake disk

  8. Workpackages • WP 1: Material requirements and preparation of starting materials • T1-1 Definition of target applications, demonstrators and material requirements • T1-2 Preparation starting materials • WP 2: Processing of FGMs • T2-1 Powder metallurgy • T2-2 Metal infiltration • T2-3 Spraying • T2-4 Processing of FGM demonstrators • WP 3: Characterisation of FGMs • T3-1 Nano/microstructure and residual stresses • T3-2 Mechanical and physical properties • T3-3Resistance to service conditions • WP 4 Modelling • T4-1 Modelling of FGM design • T4-2 Modelling of FGM properties under serviceconditions • T4-3 Modelling of uncertainties in FGM characterisation • WP 5: Demonstration • T5-1 Testing/evaluation of thruster components • T5-2 Testing/evaluation of valvetrain components • T5-3 Testing/evaluation of breaking discs components • T5-4 Life cycle analysis • WP 6: Management • WP 7: Dissemination and networking

  9. List of beneficiaries • European Virtual Institute on Knowledge-based Multifunctional Materials AISBL KMM-VIN Belgium • Fraunhofer-Institut für Fertigungstechnik und Angewandte Materialforschung FRAUNHOFER Germany • National Technical University of Athens NTUA Greece • Politechnika Wroclawska WRUT Poland • Ustav Materialov a Mechaniky Strojov Slovenskej Akademie Vied IMSAS Slovakia • Cardiff University CU UK • EADS Deutschland GmbH EADS Germany • Centro Richerche FIAT CRF Italy • Steinbeis Advanced Risk Technologies GmbH R-TECH Germany • Technische Universitaet Kaiserslautern UNIKL Germany

  10. KMM-VIN Belgium • Instytut Technologii Materialow Elektronicznych (ITME), Poland • Instytut Podstawowych Problemow Techniki Polskiej Akademii Nauk (IPPT), Poland • Instytut Metalurgii i Inzynierii Materialowej Polskiej Akademii Nauk (IMIM), Poland • Technische Universitaet Darmstadt (TUD), Germany • Politecnico di Torino (POLITO), Italy • Universita Politecnica delle Marche (UNIVPM), Italy

  11. MATRANS Consortium (16 partners) • Modelling • IPPT Warsaw (PL) • UWC Cardiff (UK) • TU Darmstadt (D) • TU Kaiserslautern • Industry/SME • CRF Fiat (IT) • EADS (D) • SteinbeisR-Tech (D) • Processing ITME Warsaw (PL) IFAM Dresden (D) TU Darmstadt (D) IMSAS Bratislava (SK) NTUA Athens (GR) POLITO, Torino (IT) WTU, Wroclaw (PL) • Characterisation IMIM Cracow (PL) UNIVPM Ancona (IT) NTUA Athens (GR) IFAM Dresden (D) Duration: 3 years (2010-2013) EC grant: 3.6 M€ START DATE: 1 Feb. 2010

  12. Poluethylene foam Previous experience in FGM’s and preliminary results Metal infiltration Powder metallurgy Ceramicpreform

  13. Previous experience in FGM’s and preliminary results 25%Al2O3-75%Me 75%Al2O3-25%Me 50%Al2O3-50%Me

  14. Al2O3 Steel Me Al Previous experience in FGM’s and preliminary results

  15. THANK YOU FOR ATTENTION

More Related