第 4 章 理想气体的热力过程 Chapter 4 Thermodynamic processes of Ideal Gas

1. 第4章 理想气体的热力过程Chapter 4 Thermodynamic processes of Ideal Gas • 4.1基本热力过程 Basic thermodynamic processes--- p.134,p.313 • 4.2多变过程 Polytropic process ---P.135 • 4.3活塞式压气机的理论压缩过程 Theoretical compression process ---P.336 • 4.4多级压缩中间冷却 Multistage Compression with inter-cooling--- P.337~P343

2. 1.本章的研究任务 The task of this chapter A. It is to determine the change in the properties of working fluid during a process; (在于确定在一个过程中工质状态参数的变化量)B. It is to determine the amount of heat,work interaction between the system and its surroundings during a process. (确定在一个过程中系统与外界所交换的功量和热量的多少) 2. 本章研究的对象 The object of this chapter Reversible processes of Ideal Gases in closed systems (闭口系统中理想气体的可逆过程)

3. 3. 所采取的步骤 The procedures adopted Pv=RT

4. 4.1 Basic Thermodynamic Process(4.1 基本热力过程) • 等容过程 • Isochoric-----Constant Volume process

5. (1) 过程方程 (Process equation) For a constant volume process, the addition or removal of heat will lead to a change in the temperature and pressure of the gas, as shown on the two graphs above. Substitute into

6. (2)内能、焓及熵的变化量 The change in Internal Energy, Enthalpy and Entropy The amount of heat added to a closed system during a constant volume process equals to the increase in internal energy. 定容过程中加入闭口系统的热量等于系统的内能的增加量

7. Entropy Change To find the Entropy change, start with the expression derived from the first law, replacing dU using the definition of specific heat at constant volume and using the definition of entropy (3) Work done and Heat Transferred(功量和热量) Applying the first law of thermodynamics to the process Replacing δW with the reversible work since the volume is constant dV = 0

8. using the definition of the specific heat at constant volume to replace dU in the first law. The technical work done

9. 2.等压过程 Isobaric-----Constant Pressure

10. (1) 过程方程 Process equation For a constant pressure process, the addition or removal of heat will lead to a change in the temperature and volume of the gas, as shown on the two graphs above. Substitute into

11. (2)内能、焓及熵的变化量 The change in Internal Energy, Enthalpy and Entropy The amount of heat added to a closed system during a constant pressure process equals to the increase in enthalpy.

12. （3） Work done and Heat Transferred The amount of heat added to a closed system during a constant pressure process equals to the increase in enthalpy.

13. During a constant pressure process, heat is added or removed and the temperature and volume changes. The volume at the end of the process can be found using the ideal gas law and the work calculated from

14. 3. 等温压缩和膨胀Isothermal Compression and Expansion

15. (1)过程方程 (Process equation) For a constant temperature process, the addition or removal of heat will lead to a change in the volume and pressure of the gas, as shown on the two graphs above. Substitute into

16. (2) 内能、焓及熵的变化量 The change in Internal Energy, Enthalpy and Entropy

17. (3)功量和热量 Work Done and Heat Transferred In an isothermal process, the temperature is constant. Applying the first law of thermodynamics to this closed process For an ideal gas, the internal energy is a function of temperature only, and since the temperature is constant, then dU is zero and

18. using the ideal gas law and integrating between the start and end of the process During an isothermal process, the work done by the system is equal to the heat added to the system, and all the work is technically usable.

19. 4.绝热过程 Adiabatic Process

20. Quasi-static, adiabatic process for an ideal gas δq = cvdT + pdv and δq = cpdT – vdp then cvdT = -pdv and cp dT =vdp therefore then finally, we arrive at the very useful expression from which it can also be shown that (1)Process equation (过程方程) or or

21. When the temperatures at the start and end of the process are known, the pressure is calculated from (2) The change in Internal Energy, Enthalpy and Entropy (内能、焓及熵的变化量） Entropy Change There is no heat transfer to or from the gas and the process is reversible so that

22. (3) Work Done and Heat Transferred(功量和热量) When the temperatures at the start and end of the process are known, the work done is calculated from

23. 5. 多变过程Polytropic Process • Many processes can be approximated by the law: • where, P Pressure, v Volume, n an index depending on the process type.

24. Polytropic processes are internally reversible. Some examples are vapors and ideal gas in many non-flow processes, such as: • n=0, results in P=constant i.e. isobaric process. • n=infinity, results in v=constant i.e. isochoric process. • n=1, results in P v=constant, which is an isothermal process for a perfect gas. • n=k, which is a reversible adiabatic process for a perfect gas.

25. Some polytropic processes are shown in figure below: • The initial state of working fluid is shown by point 0 on the P-V diagram. The polytropic state changes are: • 0 to 1= constant pressure heating, • 0 to 2= constant volume heating, • 0 to 3= reversible adiabatic compression, • 0 to 4= isothermal compression, • 0 to 5= constant pressure cooling, • 0 to 6= constant volume cooling, • 0 to 7= reversible adiabatic expansion, • 0 to 8= isothermal expansion.

26. When the temperatures at the start and end of the process are known, the pressure is calculated from (2)内能、焓及熵的变化量 The change in Internal Energy, Enthalpy and Entropy Entropy Change There is no heat transfer to or from the gas and the process is reversible so that

27. (3) Work Done and Heat Transferred(功量和热量) When the temperatures at the start and end of the process are known, the work done is calculated from

29. 29

30. 4.3活塞式压气机的工作过程 Working Process of gas piston compressor

31. Theoretical processes of single-staged piston compressor (理想单级活塞式压气机的工作原理)

32. （1）b-1:charge stroke (吸气冲程)， 吸气量增大，吸入气体的状态（P,T)不变; (2) 1- 2:compression stroke( 压缩冲程)， 吸气量不变，压力升高. let the initial pressure of the gas is (令气体初态压力为 ) the final pressure is (终态压力为 )， pressure ratio is (升压比) (3) 2- a: discharge process (排气过程), 气缸内的气体减少，气体状态不变化

33. 2. Analysis on theoretical work consumed by these processes (压气机的理论耗功量分析) • 取活塞右行一次的吸气量为控制质量，并忽略动能差及位能差进行分析。 吸气过程：气体推动活塞移动，做推挤功 ；压缩过程：气体向活塞做膨胀功 排气过程：气体向活塞做推挤功

34. 压缩过程功:指1- 2，闭口系的膨胀功，是可逆过程； 压气机耗功：指a- 1- 2- b,全过程是开口系，包括流动功。 气体在全过程中所做的总功为： 3.三种不同压缩过程的比较 (Comparison of three kinds of compression processes) Adiabatic process (绝热过程)： 压缩过程进行的很快，热量来不及释放；Isothermal process (等温过程)：压缩过程中，理想的冷却条件，压缩产生的热量可及时排出； Polytropic process (多变过程)：采用了一定的冷却措施，但压缩期间, 温度仍继续升高。

35. (1) Work consumption (耗功量） If it is isothermal compression, then 若压缩过程为可逆定温过程，则： If it is isentropic compression, then 若压缩过程为可逆绝热压缩，则:

36. If it is polytropic compression, then 若压缩过程为可逆多变过程，则 : （2） Discharge Temperature (排气温度）

37. 4.余隙容积的影响 The influence of residual volume of inter-space. （1）The influence on discharge volume( 对排气量的影响） Residual Volume (余隙容积）：V3 We note that if the pressure ratio is too high, then it can not work normally. (压缩压力不能太高，压力升高，效率下降，在极限情况下容积效率可达零 ）

38. Volume efficiency is defined as Let then The discharge volume will decrease . (余隙存在将使排气量减少） （2） The influence on compression work（对耗功量的影响） There is no influence on compression work.(对耗功量无影响)

39. 4.4 Multistage Compression with inter-cooling （多级压缩、中间冷却） Multistage compression with intercooler is especially attractive when a gas is to be compressed to very high pressures. 1. two stage compression （两级压缩） intercooler

40. Assumed that the compression process 1-2 and 3-4 are with the same polytropic index n (假设1-2和3-4的多变指数相等。) Assumed ( 假设) To minimize the total compression work, the optimal pressure ratio can be determined by (为了使压缩过程的耗功量最小,可以采用如下方法确定最佳中间压力） We obtain

41. That is, to minimize the compression work during two stage compression, the pressure ratio across each stage of the compressor must be the same. （各级压缩比都相等时多级压缩最省功。） When this condition is satisfied, the compression work at each stage becomes identical. (当满足上述条件时，每一级压缩的耗功量都相等）

42. 2. Z-Stage Compression (n级压缩） Optimal compression ration is 3. Isentropic Efficiency and Isothermal Efficiency (等熵效率和等温效率）

43. Isentropic efficiency is defined as the ratio of the work input is required to raise the pressure of a gas to a specified value in an isentropic manner to the actual work input. Isothermal Efficiency (等温效率） • Isothermal efficiency is defined as the ratio of the work input is required to raise the pressure of a gas to a specified value in a reversible isothermal manner to the actual work input.

44. Exercise (练习) • Draw the following polytropic process of air on p-v and T-s diagram. • Pressure rises, temperature increases and with heat rejection (2) Working medium expands and the temperature drops with heat rejection at the same time

45. Exercise (练习) (3)Expansion process with n=1.6,please judge the sign of (4)Compression process with n=1.3,please judge the sign of Draw the following process on the T-s Diagram.