1 / 13

Optical Fiber Cable

Optical Fiber Cable. Optical Fiber Classification. Can be classified in a number of ways On the basis of manufacturing Single component/Multi component Glass core glass clad Doped silica core clad All plastic fiber On the basis of profile Step index Multi mode Mono mode Graded index .

yauvani
Download Presentation

Optical Fiber Cable

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Optical Fiber Cable www.bzupages.com

  2. Optical Fiber Classification • Can be classified in a number of ways • On the basis of manufacturing • Single component/Multi component • Glass core glass clad • Doped silica core clad • All plastic fiber • On the basis of profile • Step index • Multi mode • Mono mode • Graded index www.bzupages.com

  3. Multi Mode Step Index • Made up of glass or doped silica • Reasonably large core diameter and NA to facilitate efficient coupling of incoherent light • Performance characteristics vary widely depending upon material used in fabrication • Structure • Core diameter: 50 to 400 µm • Clad diameter: 125 to 500 µm • Buffer jacket diameter: 250 to 1000 µm • Numerical Aperture: 0.16 to 0.5 www.bzupages.com

  4. Multi Mode Step Index • Performance characteristics • Attenuation • Approx 2.5 to 50 dB/Km @ 0.85 µm wavelength • 40 dB/Km for glass fiber • 5 dB/Km for doped silica fiber • 0.4 dB/Km @ 1.3 µm wavelength • Bandwidth • 6 to 50 M Hz Km • Application • Short haul communication • Limited bandwidth applications • Relatively low cost applications www.bzupages.com

  5. Multi Mode Graded Index • Made up of glass or doped silica • Higher purity level than MMSI fibers • Many different structural profiles developed for different application • Structure (Typical) • Core diameter: 30 to 100 µm • Clad diameter: 100 to 150 µm • Buffer jacket diameter: 250 to 1000 µm • Numerical Aperture: 0.2 to 0.3 www.bzupages.com

  6. Multi Mode Graded Index • Structural types • 50 /125 µm (core-clad) with NA between 0.20 to 0.24 recommended by ITU-T for telecom applications @ 0.85 and 1.3 µm wavelength. Now mainly used for Data Links and LANs • 65/124 µm (core-clad) with NA between 0.26 to 0.29 for long distance subscriber loops operating @ 0.85 and 1.3 µm. Now mainly used for LANs • 100/125 µm (core-clad)with NA of 0.29. High coupling efficiency with LEDs operating @ 0.85 µm. Used in low cost, short distance applications www.bzupages.com

  7. Multi Mode Graded Index • Performance characteristics • Attenuation • Approx 2 to 10 dB/Km @ 0.85 µm wavelength • 0.4 dB/Km @ 1.3 µm and 0.25dB/Km @1.55 µm • Bandwidth • 300 to 3 GHz-Km • Application • Medium haul communication • Medium to high bandwidth applications www.bzupages.com

  8. Single Mode Step Index • Made up of doped silica • Small core diameter • Structure • Core diameter: 5 to 10 µm • Clad diameter: Generally 125µm • Buffer jacket diameter: 250 to 1000 µm • Numerical Aperture: 0.08 to 0.15 (usually around 0.1) www.bzupages.com

  9. Single Mode Step Index • Performance characteristics • Attenuation • Approx 2 to 5dB/Km @ 0.85 µm wavelength • Bandwidth • Greater than 500MHzKm • Theoretically 40GHzKm @ 0.85 µm • Practical bandwidth of 10GHzKM @ 1.3 µm • Application • Long haul communication • Excessive bandwidth applications www.bzupages.com

  10. Plastic Clad Fibers • Multimode fibers with both step and graded profiles • Glass core and plastic clad (often silicon rubber) • Lower induced radiation losses (improved performance under certain environments) • Slightly cheaper • Structure SI GI • Core diameter: 100 to 500 50 to 100 µm • Clad diameter: 300 to 800 125 to 150 µm • Buffer jacket diameter: 500 to 1000 250 to 1000 µm • Numerical Aperture: 0.2 to 0.5 0.2 to 0.3 www.bzupages.com

  11. Plastic Clad Fibers • Performance Characteristics • Step Index: 5 to 50 dB/Km • Graded index: 4 to 15 dB/Km www.bzupages.com

  12. Optical Fiber Cable • Why we need cabling • Unprotected optical fiber has many disadvantages • Poor strength and stability • Brittle and small cross sections are susceptible to damage during laying • Hence cabling is done to improve • Fiber protection • Fiber damage and breakage during installation and throughout life www.bzupages.com

  13. Optical Fiber Cable • Cable strength • Should have similar mechanical properties as of electrical cables • Increase in resistance to mechanical stress, strain and adverse environmental condition • Squeezing and vibrations • Identification of joints • Stability • Reduction of micro bending due to environmental conditions specially temperature • Reduction in hydrogen absorption and nuclear radiation exposure www.bzupages.com

More Related