1 / 10

909 21/2”-10”

909 21/2”-10”. Modification Overview. Production began in 1979. The 909M1 (1989) for the 8”-10” sizes only. Downsized the RV and changed the housing from bronze to cast iron epoxy coated. Lead free (LF) version was introduced in 2010. Check Cover Removal. Cover is o-ring sealed.

yvonne-lott
Download Presentation

909 21/2”-10”

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 909 21/2”-10”

  2. Modification Overview • Production began in 1979. • The 909M1 (1989) for the 8”-10” sizes only. Downsized the RV and changed the housing from bronze to cast iron epoxy coated. • Lead free (LF) version was introduced in 2010.

  3. Check Cover Removal • Cover is o-ring sealed. • Loosen bolts ½”. Spring load is now released from the cover and retained by the check subassembly. • Verify spring load before removing all the bolts.

  4. Check Valve Removal • Center stem guided check assembly. • Disc & spring subassembly. • Slide subassembly straight out of seat and body.

  5. Check Seat Removal * 21/2-3” Seats removed by ¼ turn twist. • 4”-10” Seats secured by two retaining wires. Each wire 10” long. • Pull one wire clockwise / one wire counter clockwise. • Seats are o-ring sealed and pull straight out of body.

  6. Check Disc Replacement • Remove retaining nut for sizes 21/2”-4”. • Remove allen head screws in retainer plate for sizes 6”-10”.

  7. RV Cover Removal • RV Cover is sealed by the diaphragm. • Loosen cover bolts ½”. Spring load is now released from the cover and retained by the bottom plug assembly. • Verify spring load before removing all the bolts.

  8. RV Stem Removal • The piston subassembly can be lifted straight up and out of the body. • The bottom plug subassembly (4”-10”) contains the spring and does not need to be removed for normal service. * For removal: simply unscrew from outside the RV body.

  9. RV Seat Removal • Unless damaged, there is no need to remove the RV seat. • RV seat is threaded and o-ring sealed.

  10. RV Rubber Replacement • Replace diaphragm. • Replace wiper seal and piston o-ring. Apply lubricant to the o-ring. • Replace RV disc. * Hold upper guide fin and unscrew pressure plate. Replace disc assembly and stem o-ring.

More Related